Postfix Configuration Parameters Postfix Configuration Parameters The Postfix main.cf configuration file specifies a very small subset of all the parameters that control the operation of the Postfix mail system. Parameters not explicitly specified are left at their default values.
The general format of the main.cf file is as follows:
Each logical line is in the form "parameter = value". Whitespace around the "=" is ignored, as is whitespace at the end of a logical line.
Empty lines and whitespace-only lines are ignored, as are lines whose first non-whitespace character is a `#'.
A logical line starts with non-whitespace text. A line that starts with whitespace continues a logical line.
A parameter value may refer to other parameters.
The expressions "$name", "${name}" or "$(name)" are recursively replaced by the value of the named parameter.
The expression "${name?value}" expands to "value" when "$name" is non-empty. This form is supported with Postfix version 2.2 and later.
The expression "${name:value}" expands to "value" when "$name" is empty. This form is supported with Postfix version 2.2 and later.
Specify "$$" to produce a single "$" character.
When the same parameter is defined multiple times, only the last instance is remembered.
Otherwise, the order of main.cf parameter definitions does not matter.
The remainder of this document is a description of all Postfix configuration parameters. Default values are shown after the parameter name in parentheses, and can be looked up with the "postconf -d" command.
Note: this is not an invitation to make changes to Postfix configuration parameters. Unnecessary changes are likely to impair the operation of the mail system.
The recipient of undeliverable mail that cannot be returned to the sender. This feature is enabled with the notify_classes parameter.
The numerical Postfix SMTP server response code for an access(5) map "defer" action, including "defer_if_permit" or "defer_if_reject". Prior to Postfix 2.6, the response is hard-coded as "450".
Do not change this unless you have a complete understanding of RFC 2821.
This feature is available in Postfix 2.6 and later.
The numerical Postfix SMTP server response code for an access(5) map "reject" action.
Do not change this unless you have a complete understanding of RFC 2821.
The amount of time between verify(8) address verification database cleanup runs. This feature requires that the database supports the "delete" and "sequence" operators. Specify a zero interval to disable database cleanup.
After each database cleanup run, the verify(8) daemon logs the number of entries that were retained and dropped. A cleanup run is logged as "partial" when the daemon terminates early after "postfix reload", "postfix stop", or no requests for $max_idle seconds.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.7.
Overrides the default_transport parameter setting for address verification probes.
This feature is available in Postfix 2.1 and later.
Overrides the local_transport parameter setting for address verification probes.
This feature is available in Postfix 2.1 and later.
Lookup table for persistent address verification status storage. The table is maintained by the verify(8) service, and is opened before the process releases privileges.
The lookup table is persistent by default (Postfix 2.7 and later). Specify an empty table name to keep the information in volatile memory which is lost after "postfix reload" or "postfix stop". This is the default with Postfix version 2.6 and earlier.
Specify a location in a file system that will not fill up. If the database becomes corrupted, the world comes to an end. To recover delete (NOT: truncate) the file and do "postfix reload".
Postfix daemon processes do not use root privileges when opening this file (Postfix 2.5 and later). The file must therefore be stored under a Postfix-owned directory such as the data_directory. As a migration aid, an attempt to open the file under a non-Postfix directory is redirected to the Postfix-owned data_directory, and a warning is logged.
Examples:
address_verify_map = hash:/var/lib/postfix/verify address_verify_map = btree:/var/lib/postfix/verify
This feature is available in Postfix 2.1 and later.
Enable caching of failed address verification probe results. When this feature is enabled, the cache may pollute quickly with garbage. When this feature is disabled, Postfix will generate an address probe for every lookup.
This feature is available in Postfix 2.1 and later.
The time after which a failed probe expires from the address verification cache.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.1 and later.
The time after which a failed address verification probe needs to be refreshed.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.1 and later.
How many times to query the verify(8) service for the completion of an address verification request in progress.
By default, the Postfix SMTP server polls the verify(8) service up to three times under non-overload conditions, and only once when under overload. With Postfix version 2.5 and earlier, the SMTP server always polls the verify(8) service up to three times by default.
Specify 1 to implement a crude form of greylisting, that is, always defer the first delivery request for a new address.
Examples:
# Postfix ≤ 2.6 default address_verify_poll_count = 3 # Poor man's greylisting address_verify_poll_count = 1
This feature is available in Postfix 2.1 and later.
The delay between queries for the completion of an address verification request in progress.
The default polling delay is 3 seconds.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.1 and later.
The time after which a successful probe expires from the address verification cache.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.1 and later.
The time after which a successful address verification probe needs to be refreshed. The address verification status is not updated when the probe fails (optimistic caching).
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.1 and later.
Overrides the relay_transport parameter setting for address verification probes.
This feature is available in Postfix 2.1 and later.
Overrides the relayhost parameter setting for address verification probes. This information can be overruled with the transport(5) table.
This feature is available in Postfix 2.1 and later.
The sender address to use in address verification probes; prior to Postfix 2.5 the default was "postmaster". To avoid problems with address probes that are sent in response to address probes, the Postfix SMTP server excludes the probe sender address from all SMTPD access blocks.
Specify an empty value (address_verify_sender =) or <> if you want to use the null sender address. Beware, some sites reject mail from <>, even though RFCs require that such addresses be accepted.
Examples:
address_verify_sender = <> address_verify_sender = [email protected]
This feature is available in Postfix 2.1 and later.
Overrides the sender_dependent_default_transport_maps parameter setting for address verification probes.
This feature is available in Postfix 2.7 and later.
Overrides the sender_dependent_relayhost_maps parameter setting for address verification probes.
This feature is available in Postfix 2.3 and later.
The name of the verify(8) address verification service. This service maintains the status of sender and/or recipient address verification probes, and generates probes on request by other Postfix processes.
Overrides the transport_maps parameter setting for address verification probes.
This feature is available in Postfix 2.1 and later.
Overrides the virtual_transport parameter setting for address verification probes.
This feature is available in Postfix 2.1 and later.
The alias databases for local(8) delivery that are updated with "newaliases" or with "sendmail -bi".
This is a separate configuration parameter because not all the tables specified with $alias_maps have to be local files.
Examples:
alias_database = hash:/etc/aliases alias_database = hash:/etc/mail/aliases
The alias databases that are used for local(8) delivery. See aliases(5) for syntax details.
The default list is system dependent. On systems with NIS, the default is to search the local alias database, then the NIS alias database.
If you change the alias database, run "postalias /etc/aliases" (or wherever your system stores the mail alias file), or simply run "newaliases" to build the necessary DBM or DB file.
The local(8) delivery agent disallows regular expression substitution of $1 etc. in alias_maps, because that would open a security hole.
The local(8) delivery agent will silently ignore requests to use the proxymap(8) server within alias_maps. Instead it will open the table directly. Before Postfix version 2.2, the local(8) delivery agent will terminate with a fatal error.
Examples:
alias_maps = hash:/etc/aliases, nis:mail.aliases alias_maps = hash:/etc/aliases
Restrict local(8) mail delivery to external commands. The default is to disallow delivery to "|command" in :include: files (see aliases(5) for the text that defines this terminology).
Specify zero or more of: alias, forward or include, in order to allow commands in aliases(5), .forward files or in :include: files, respectively.
Example:
allow_mail_to_commands = alias,forward,include
Restrict local(8) mail delivery to external files. The default is to disallow "/file/name" destinations in :include: files (see aliases(5) for the text that defines this terminology).
Specify zero or more of: alias, forward or include, in order to allow "/file/name" destinations in aliases(5), .forward files and in :include: files, respectively.
Example:
allow_mail_to_files = alias,forward,include
Allow a sender or recipient address to have `-' as the first character. By default, this is not allowed, to avoid accidents with software that passes email addresses via the command line. Such software would not be able to distinguish a malicious address from a bona fide command-line option. Although this can be prevented by inserting a "--" option terminator into the command line, this is difficult to enforce consistently and globally.
As of Postfix version 2.5, this feature is implemented by trivial-rewrite(8). With earlier versions this feature was implemented by qmgr(8) and was limited to recipient addresses only.
Enable the rewriting of the form "user%domain" to "user@domain". This is enabled by default.
Note: with Postfix version 2.2, message header address rewriting happens only when one of the following conditions is true:
To get the behavior before Postfix version 2.2, specify "local_header_rewrite_clients = static:all".
Example:
allow_percent_hack = no
Forward mail with sender-specified routing (user[@%!]remote[@%!]site) from untrusted clients to destinations matching $relay_domains.
By default, this feature is turned off. This closes a nasty open relay loophole where a backup MX host can be tricked into forwarding junk mail to a primary MX host which then spams it out to the world.
This parameter also controls if non-local addresses with sender-specified routing can match Postfix access tables. By default, such addresses cannot match Postfix access tables, because the address is ambiguous.
A list of non-default Postfix configuration directories that may be specified with "-c config_directory" on the command line, or via the MAIL_CONFIG environment parameter.
This list must be specified in the default Postfix configuration directory, and is used by set-gid Postfix commands such as postqueue(1) and postdrop(1).
Always add (Resent-) From:, To:, Date: or Message-ID: headers when not present. Postfix 2.6 and later add these headers only when clients match the local_header_rewrite_clients parameter setting. Earlier Postfix versions always add these headers; this may break DKIM signatures that cover non-existent headers.
Optional address that receives a "blind carbon copy" of each message that is received by the Postfix mail system.
Note: if mail to the BCC address bounces it will be returned to the sender.
Note: automatic BCC recipients are produced only for new mail. To avoid mailer loops, automatic BCC recipients are not generated after Postfix forwards mail internally, or after Postfix generates mail itself.
The time unit over which client connection rates and other rates are calculated.
This feature is implemented by the anvil(8) service which is available in Postfix version 2.2 and later.
The default interval is relatively short. Because of the high frequency of updates, the anvil(8) server uses volatile memory only. Thus, information is lost whenever the process terminates.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
How frequently the anvil(8) connection and rate limiting server logs peak usage information.
This feature is available in Postfix 2.2 and later.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
With locally submitted mail, append the string "@$myorigin" to mail addresses without domain information. With remotely submitted mail, append the string "@$remote_header_rewrite_domain" instead.
Note 1: this feature is enabled by default and must not be turned off. Postfix does not support domain-less addresses.
Note 2: with Postfix version 2.2, message header address rewriting happens only when one of the following conditions is true:
To get the behavior before Postfix version 2.2, specify "local_header_rewrite_clients = static:all".
With locally submitted mail, append the string ".$mydomain" to addresses that have no ".domain" information. With remotely submitted mail, append the string ".$remote_header_rewrite_domain" instead.
Note 1: this feature is enabled by default. If disabled, users will not be able to send mail to "user@partialdomainname" but will have to specify full domain names instead.
Note 2: with Postfix version 2.2, message header address rewriting happens only when one of the following conditions is true:
To get the behavior before Postfix version 2.2, specify "local_header_rewrite_clients = static:all".
How long the postkick(1) command waits for a request to enter the server's input buffer before giving up.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
This feature is available in Postfix 2.1 and later.
List of users who are authorized to flush the queue.
By default, all users are allowed to flush the queue. Access is always granted if the invoking user is the super-user or the $mail_owner user. Otherwise, the real UID of the process is looked up in the system password file, and access is granted only if the corresponding login name is on the access list. The username "unknown" is used for processes whose real UID is not found in the password file.
Specify a list of user names, "/file/name" or "type:table" patterns, separated by commas and/or whitespace. The list is matched left to right, and the search stops on the first match. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a name matches a lookup key (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude a name from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
This feature is available in Postfix 2.2 and later.
List of users who are authorized to view the queue.
By default, all users are allowed to view the queue. Access is always granted if the invoking user is the super-user or the $mail_owner user. Otherwise, the real UID of the process is looked up in the system password file, and access is granted only if the corresponding login name is on the access list. The username "unknown" is used for processes whose real UID is not found in the password file.
Specify a list of user names, "/file/name" or "type:table" patterns, separated by commas and/or whitespace. The list is matched left to right, and the search stops on the first match. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a name matches a lookup key (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude a user name from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
This feature is available in Postfix 2.2 and later.
List of users who are authorized to submit mail with the sendmail(1) command (and with the privileged postdrop(1) helper command).
By default, all users are allowed to submit mail. Otherwise, the real UID of the process is looked up in the system password file, and access is granted only if the corresponding login name is on the access list. The username "unknown" is used for processes whose real UID is not found in the password file. To deny mail submission access to all users specify an empty list.
Specify a list of user names, "/file/name" or "type:table" patterns, separated by commas and/or whitespace. The list is matched left to right, and the search stops on the first match. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a name matches a lookup key (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude a user name from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
Example:
authorized_submit_users = !www, static:all
This feature is available in Postfix 2.2 and later.
What SMTP clients are allowed to specify the XVERP command. This command requests that mail be delivered one recipient at a time with a per recipient return address.
By default, only trusted clients are allowed to specify XVERP.
This parameter was introduced with Postfix version 1.1. Postfix version 2.1 renamed this parameter to smtpd_authorized_verp_clients and changed the default to none.
Specify a list of network/netmask patterns, separated by commas and/or whitespace. The mask specifies the number of bits in the network part of a host address. You can also specify hostnames or .domain names (the initial dot causes the domain to match any name below it), "/file/name" or "type:table" patterns. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a table entry matches a lookup string (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude an address or network block from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
Note: IP version 6 address information must be specified inside [] in the authorized_verp_clients value, and in files specified with "/file/name". IP version 6 addresses contain the ":" character, and would otherwise be confused with a "type:table" pattern.
Produce additional bounce(8) logfile records that can be read by Postfix versions before 2.0. The current and more extensible "name = value" format is needed in order to implement more sophisticated functionality.
This feature is available in Postfix 2.1 and later.
The per-table I/O buffer size for programs that create Berkeley DB hash or btree tables. Specify a byte count.
This feature is available in Postfix 2.0 and later.
The per-table I/O buffer size for programs that read Berkeley DB hash or btree tables. Specify a byte count.
This feature is available in Postfix 2.0 and later.
Where the Postfix SMTP client should deliver mail when it detects a "mail loops back to myself" error condition. This happens when the local MTA is the best SMTP mail exchanger for a destination not listed in $mydestination, $inet_interfaces, $proxy_interfaces, $virtual_alias_domains, or $virtual_mailbox_domains. By default, the Postfix SMTP client returns such mail as undeliverable.
Specify, for example, "best_mx_transport = local" to pass the mail from the Postfix SMTP client to the local(8) delivery agent. You can specify any message delivery "transport" or "transport:nexthop" that is defined in the master.cf file. See the transport(5) manual page for the syntax and meaning of "transport" or "transport:nexthop".
However, this feature is expensive because it ties up a Postfix SMTP client process while the local(8) delivery agent is doing its work. It is more efficient (for Postfix) to list all hosted domains in a table or database.
Whether or not to use the local biff service. This service sends "new mail" notifications to users who have requested new mail notification with the UNIX command "biff y".
For compatibility reasons this feature is on by default. On systems with lots of interactive users, the biff service can be a performance drain. Specify "biff = no" in main.cf to disable.
Optional lookup tables for content inspection as specified in the body_checks(5) manual page.
Note: with Postfix versions before 2.0, these rules inspect all content after the primary message headers.
How much text in a message body segment (or attachment, if you prefer to use that term) is subjected to body_checks inspection. The amount of text is limited to avoid scanning huge attachments.
This feature is available in Postfix 2.0 and later.
The recipient of postmaster notifications with the message headers of mail that Postfix did not deliver and of SMTP conversation transcripts of mail that Postfix did not receive. This feature is enabled with the notify_classes parameter.
The maximal time a bounce message is queued before it is considered undeliverable. By default, this is the same as the queue life time for regular mail.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is d (days).
Specify 0 when mail delivery should be tried only once.
This feature is available in Postfix 2.1 and later.
The name of the bounce(8) service. This service maintains a record of failed delivery attempts and generates non-delivery notifications.
This feature is available in Postfix 2.0 and later.
The maximal amount of original message text that is sent in a non-delivery notification. Specify a byte count. A message is returned as either message/rfc822 (the complete original) or as text/rfc822-headers (the headers only). With Postfix version 2.4 and earlier, a message is always returned as message/rfc822 and is truncated when it exceeds the size limit.
Notes:
If you increase this limit, then you should increase the mime_nesting_limit value proportionally.
Be careful when making changes. Excessively large values will result in the loss of non-delivery notifications, when a bounce message size exceeds a local or remote MTA's message size limit.
Pathname of a configuration file with bounce message templates. These override the built-in templates of delivery status notification (DSN) messages for undeliverable mail, for delayed mail, successful delivery, or delivery verification. The bounce(5) manual page describes how to edit and test template files.
Template message body text may contain $name references to Postfix configuration parameters. The result of $name expansion can be previewed with "postconf -b file_name" before the file is placed into the Postfix configuration directory.
This feature is available in Postfix 2.3 and later.
Enable inter-operability with SMTP clients that implement an obsolete version of the AUTH command (RFC 4954). Examples of such clients are MicroSoft Outlook Express version 4 and MicroSoft Exchange version 5.0.
Specify "broken_sasl_auth_clients = yes" to have Postfix advertise AUTH support in a non-standard way.
What addresses are subject to canonical_maps address mapping. By default, canonical_maps address mapping is applied to envelope sender and recipient addresses, and to header sender and header recipient addresses.
Specify one or more of: envelope_sender, envelope_recipient, header_sender, header_recipient
This feature is available in Postfix 2.2 and later.
Optional address mapping lookup tables for message headers and envelopes. The mapping is applied to both sender and recipient addresses, in both envelopes and in headers, as controlled with the canonical_classes parameter. This is typically used to clean up dirty addresses from legacy mail systems, or to replace login names by Firstname.Lastname. The table format and lookups are documented in canonical(5). For an overview of Postfix address manipulations see the ADDRESS_REWRITING_README document.
If you use this feature, run "postmap /etc/postfix/canonical" to build the necessary DBM or DB file after every change. The changes will become visible after a minute or so. Use "postfix reload" to eliminate the delay.
Note: with Postfix version 2.2, message header address mapping happens only when message header address rewriting is enabled:
To get the behavior before Postfix version 2.2, specify "local_header_rewrite_clients = static:all".
Examples:
canonical_maps = dbm:/etc/postfix/canonical canonical_maps = hash:/etc/postfix/canonical
The name of the cleanup(8) service. This service rewrites addresses into the standard form, and performs canonical(5) address mapping and virtual(5) aliasing.
This feature is available in Postfix 2.0 and later.
The location of all postfix administrative commands.
The local(8) delivery agent working directory for delivery to external command. Failure to change directory causes the delivery to be deferred.
The following $name expansions are done on command_execution_directory before the directory is changed. Expansion happens in the context of the delivery request. The result of $name expansion is filtered with the character set that is specified with the execution_directory_expansion_filter parameter.
Instead of $name you can also specify ${name} or $(name).
This feature is available in Postfix 2.2 and later.
Restrict the characters that the local(8) delivery agent allows in $name expansions of $mailbox_command and $command_execution_directory. Characters outside the allowed set are replaced by underscores.
Time limit for delivery to external commands. This limit is used by the local(8) delivery agent, and is the default time limit for delivery by the pipe(8) delivery agent.
Note: if you set this time limit to a large value you must update the global ipc_timeout parameter as well.
The default location of the Postfix main.cf and master.cf configuration files. This can be overruled via the following mechanisms:
The MAIL_CONFIG environment variable (daemon processes and commands).
The "-c" command-line option (commands only).
With Postfix command that run with set-gid privileges, a config_directory override requires either root privileges, or it requires that the directory is listed with the alternate_config_directories parameter in the default main.cf file.
Time limit for connection cache connect, send or receive operations. The time limit is enforced in the client.
This feature is available in Postfix 2.3 and later.
The name of the scache(8) connection cache service. This service maintains a limited pool of cached sessions.
This feature is available in Postfix 2.2 and later.
How frequently the scache(8) server logs usage statistics with connection cache hit and miss rates for logical destinations and for physical endpoints.
The maximal time-to-live value that the scache(8) connection cache server allows. Requests that specify a larger TTL will be stored with the maximum allowed TTL. The purpose of this additional control is to protect the infrastructure against careless people. The cache TTL is already bounded by $max_idle.
After the message is queued, send the entire message to the specified transport:destination. The transport name specifies the first field of a mail delivery agent definition in master.cf; the syntax of the next-hop destination is described in the manual page of the corresponding delivery agent. More information about external content filters is in the Postfix FILTER_README file.
Notes:
This setting has lower precedence than a FILTER action that is specified in an access(5), header_checks(5) or body_checks(5) table.
The meaning of an empty next-hop filter destination is version dependent. Postfix 2.7 and later will use the recipient domain; earlier versions will use $myhostname. Specify "default_filter_nexthop = $myhostname" for compatibility with Postfix 2.6 or earlier, or specify a content_filter value with an explicit next-hop destination.
Search path for Cyrus SASL application configuration files, currently used only to locate the $smtpd_sasl_path.conf file. Specify zero or more directories separated by a colon character, or an empty value to use Cyrus SASL's built-in search path.
This feature is available in Postfix 2.5 and later when compiled with Cyrus SASL 2.1.22 or later.
The directory with Postfix support programs and daemon programs. These should not be invoked directly by humans. The directory must be owned by root.
How much time a Postfix daemon process may take to handle a request before it is terminated by a built-in watchdog timer.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The directory with Postfix-writable data files (for example: caches, pseudo-random numbers). This directory must be owned by the mail_owner account, and must not be shared with non-Postfix software.
This feature is available in Postfix 2.5 and later.
The increment in verbose logging level when a remote client or server matches a pattern in the debug_peer_list parameter.
Optional list of remote client or server hostname or network address patterns that cause the verbose logging level to increase by the amount specified in $debug_peer_level.
Specify domain names, network/netmask patterns, "/file/name" patterns or "type:table" lookup tables. The right-hand side result from "type:table" lookups is ignored.
Pattern matching of domain names is controlled by the parent_domain_matches_subdomains parameter.
Examples:
debug_peer_list = 127.0.0.1 debug_peer_list = example.com
The external command to execute when a Postfix daemon program is invoked with the -D option.
Use "command .. & sleep 5" so that the debugger can attach before the process marches on. If you use an X-based debugger, be sure to set up your XAUTHORITY environment variable before starting Postfix.
Example:
debugger_command =
PATH=/usr/bin:/usr/X11R6/bin
ddd $daemon_directory/$process_name $process_id & sleep 5
The default database type for use in newaliases(1), postalias(1) and postmap(1) commands. On many UNIX systems the default type is either dbm or hash. The default setting is frozen when the Postfix system is built.
Examples:
default_database_type = hash default_database_type = dbm
How often the Postfix queue manager's scheduler is allowed to preempt delivery of one message with another.
Each transport maintains a so-called "available delivery slot counter" for each message. One message can be preempted by another one when the other message can be delivered using no more delivery slots (i.e., invocations of delivery agents) than the current message counter has accumulated (or will eventually accumulate - see about slot loans below). This parameter controls how often is the counter incremented - it happens after each default_delivery_slot_cost recipients have been delivered.
The cost of 0 is used to disable the preempting scheduling completely. The minimum value the scheduling algorithm can use is 2 - use it if you want to maximize the message throughput rate. Although there is no maximum, it doesn't make much sense to use values above say 50.
The only reason why the value of 2 is not the default is the way this parameter affects the delivery of mailing-list mail. In the worst case, their delivery can take somewhere between (cost+1/cost) and (cost/cost-1) times more than if the preemptive scheduler was disabled. The default value of 5 turns out to provide reasonable message response times while making sure the mailing-list deliveries are not extended by more than 20-25 percent even in the worst case.
Use transport_delivery_slot_cost to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
Examples:
default_delivery_slot_cost = 0 default_delivery_slot_cost = 2
The default value for transport-specific _delivery_slot_discount settings.
This parameter speeds up the moment when a message preemption can happen. Instead of waiting until the full amount of delivery slots required is available, the preemption can happen when transport_delivery_slot_discount percent of the required amount plus transport_delivery_slot_loan still remains to be accumulated. Note that the full amount will still have to be accumulated before another preemption can take place later.
Use transport_delivery_slot_discount to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
The default value for transport-specific _delivery_slot_loan settings.
This parameter speeds up the moment when a message preemption can happen. Instead of waiting until the full amount of delivery slots required is available, the preemption can happen when transport_delivery_slot_discount percent of the required amount plus transport_delivery_slot_loan still remains to be accumulated. Note that the full amount will still have to be accumulated before another preemption can take place later.
Use transport_delivery_slot_loan to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
How many pseudo-cohorts must suffer connection or handshake failure before a specific destination is considered unavailable (and further delivery is suspended). Specify zero to disable this feature. A destination's pseudo-cohort failure count is reset each time a delivery completes without connection or handshake failure for that specific destination.
A pseudo-cohort is the number of deliveries equal to a destination's delivery concurrency.
Use transport_destination_concurrency_failed_cohort_limit to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.5. The default setting is compatible with earlier Postfix versions.
The default maximal number of parallel deliveries to the same destination. This is the default limit for delivery via the lmtp(8), pipe(8), smtp(8) and virtual(8) delivery agents. With per-destination recipient limit > 1, a destination is a domain, otherwise it is a recipient.
Use transport_destination_concurrency_limit to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
The per-destination amount of delivery concurrency negative feedback, after a delivery completes with a connection or handshake failure. Feedback values are in the range 0..1 inclusive. With negative feedback, concurrency is decremented at the beginning of a sequence of length 1/feedback. This is unlike positive feedback, where concurrency is incremented at the end of a sequence of length 1/feedback.
As of Postfix version 2.5, negative feedback cannot reduce delivery concurrency to zero. Instead, a destination is marked dead (further delivery suspended) after the failed pseudo-cohort count reaches $default_destination_concurrency_failed_cohort_limit (or $transport_destination_concurrency_failed_cohort_limit). To make the scheduler completely immune to connection or handshake failures, specify a zero feedback value and a zero failed pseudo-cohort limit.
Specify one of the following forms:
A pseudo-cohort is the number of deliveries equal to a destination's delivery concurrency.
Use transport_destination_concurrency_negative_feedback to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.5. The default setting is compatible with earlier Postfix versions.
The per-destination amount of delivery concurrency positive feedback, after a delivery completes without connection or handshake failure. Feedback values are in the range 0..1 inclusive. The concurrency increases until it reaches the per-destination maximal concurrency limit. With positive feedback, concurrency is incremented at the end of a sequence with length 1/feedback. This is unlike negative feedback, where concurrency is decremented at the start of a sequence of length 1/feedback.
Specify one of the following forms:
A pseudo-cohort is the number of deliveries equal to a destination's delivery concurrency.
Use transport_destination_concurrency_positive_feedback to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.5 and later.
The default amount of delay that is inserted between individual deliveries to the same destination; with per-destination recipient limit > 1, a destination is a domain, otherwise it is a recipient.
To enable the delay, specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit).
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
NOTE: the delay is enforced by the queue manager. The delay timer state does not survive "postfix reload" or "postfix stop".
Use transport_destination_rate_delay to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
NOTE: with a non-zero _destination_rate_delay, specify a transport_destination_concurrency_failed_cohort_limit of 10 or more to prevent Postfix from deferring all mail for the same destination after only one connection or handshake error.
This feature is available in Postfix 2.5 and later.
The default maximal number of recipients per message delivery. This is the default limit for delivery via the lmtp(8), pipe(8), smtp(8) and virtual(8) delivery agents.
Setting this parameter to a value of 1 changes the meaning of the corresponding per-destination concurrency limit from concurrency per domain into concurrency per recipient.
Use transport_destination_recipient_limit to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
The default value for the extra per-transport limit imposed on the number of in-memory recipients. This extra recipient space is reserved for the cases when the Postfix queue manager's scheduler preempts one message with another and suddenly needs some extra recipients slots for the chosen message in order to avoid performance degradation.
Use transport_extra_recipient_limit to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
When a content_filter or FILTER request specifies no explicit next-hop destination, use $default_filter_nexthop instead; when that value is empty, use the domain in the recipient address. Specify "default_filter_nexthop = $myhostname" for compatibility with Postfix version 2.6 and earlier, or specify an explicit next-hop destination with each content_filter value or FILTER action.
This feature is available in Postfix 2.7 and later.
How many recipients a message must have in order to invoke the Postfix queue manager's scheduling algorithm at all. Messages which would never accumulate at least this many delivery slots (subject to slot cost parameter as well) are never preempted.
Use transport_minimum_delivery_slots to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
The default rights used by the local(8) delivery agent for delivery to external file or command. These rights are used when delivery is requested from an aliases(5) file that is owned by root, or when delivery is done on behalf of root. DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
The default maximal number of Postfix child processes that provide a given service. This limit can be overruled for specific services in the master.cf file.
The default SMTP server response template for a request that is rejected by an RBL-based restriction. This template can be overruled by specific entries in the optional rbl_reply_maps lookup table.
This feature is available in Postfix 2.0 and later.
The template is subject to exactly one level of $name substitution:
Instead of $name you can also specify ${name} or $(name).
Note: when an enhanced status code is specified in an RBL reply template, it is subject to modification. The following transformations are needed when the same RBL reply template is used for client, helo, sender, or recipient access restrictions.
When rejecting a sender address, the Postfix SMTP server will transform a recipient DSN status (e.g., 4.1.1-4.1.6) into the corresponding sender DSN status, and vice versa.
When rejecting non-address information (such as the HELO command argument or the client hostname/address), the Postfix SMTP server will transform a sender or recipient DSN status into a generic non-address DSN status (e.g., 4.0.0).
The default per-transport upper limit on the number of in-memory recipients. These limits take priority over the global qmgr_message_recipient_limit after the message has been assigned to the respective transports. See also default_extra_recipient_limit and qmgr_message_recipient_minimum.
Use transport_recipient_limit to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
The default per-transport maximum delay between recipients refills. When not all message recipients fit into the memory at once, keep loading more of them at least once every this many seconds. This is used to make sure the recipients are refilled in timely manner even when $default_recipient_refill_limit is too high for too slow deliveries.
Use transport_recipient_refill_delay to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.4 and later.
The default per-transport limit on the number of recipients refilled at once. When not all message recipients fit into the memory at once, keep loading more of them in batches of at least this many at a time. See also $default_recipient_refill_delay, which may result in recipient batches lower than this when this limit is too high for too slow deliveries.
Use transport_recipient_refill_limit to specify a transport-specific override, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.4 and later.
The default mail delivery transport and next-hop destination for destinations that do not match $mydestination, $inet_interfaces, $proxy_interfaces, $virtual_alias_domains, $virtual_mailbox_domains, or $relay_domains. This information can be overruled with the sender_dependent_default_transport_maps parameter and with the transport(5) table.
In order of decreasing precedence, the nexthop destination is taken from $sender_dependent_default_transport_maps, $default_transport, $sender_dependent_relayhost_maps, $relayhost, or from the recipient domain.
Specify a string of the form transport:nexthop, where transport is the name of a mail delivery transport defined in master.cf. The :nexthop destination is optional; its syntax is documented in the manual page of the corresponding delivery agent.
Example:
default_transport = uucp:relayhostname
The two default VERP delimiter characters. These are used when no explicit delimiters are specified with the SMTP XVERP command or with the "sendmail -V" command-line option. Specify characters that are allowed by the verp_delimiter_filter setting.
This feature is available in Postfix 1.1 and later.
The numerical Postfix SMTP server response code when a remote SMTP client request is rejected by the "defer" restriction.
Do not change this unless you have a complete understanding of RFC 2821.
The name of the defer service. This service is implemented by the bounce(8) daemon and maintains a record of failed delivery attempts and generates non-delivery notifications.
This feature is available in Postfix 2.0 and later.
The names of message delivery transports that should not deliver mail unless someone issues "sendmail -q" or equivalent. Specify zero or more names of mail delivery transports names that appear in the first field of master.cf.
Example:
defer_transports = smtp
The maximal number of digits after the decimal point when logging sub-second delay values. Specify a number in the range 0..6.
Large delay values are rounded off to an integral number seconds; delay values below the delay_logging_resolution_limit are logged as "0", and small delay values are logged with at most two-digit precision.
The format of the "delays=a/b/c/d" logging is as follows:
This feature is available in Postfix 2.3 and later.
The recipient of postmaster notifications with the message headers of mail that cannot be delivered within $delay_warning_time time units.
This feature is enabled with the delay_warning_time parameter.
The time after which the sender receives the message headers of mail that is still queued.
To enable this feature, specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit).
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is h (hours).
The maximal number of attempts to acquire an exclusive lock on a mailbox file or bounce(8) logfile.
The time between attempts to acquire an exclusive lock on a mailbox file or bounce(8) logfile.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
Make the queue manager's feedback algorithm verbose for performance analysis purposes.
This feature is available in Postfix 2.5 and later.
Automatically detect 8BITMIME body content by looking at Content-Transfer-Encoding: message headers; historically, this behavior was hard-coded to be "always on".
This feature is available in Postfix 2.5 and later.
Disable DNS lookups in the Postfix SMTP and LMTP clients. When disabled, hosts are looked up with the getaddrinfo() system library routine which normally also looks in /etc/hosts.
DNS lookups are enabled by default.
Turn off MIME processing while receiving mail. This means that no special treatment is given to Content-Type: message headers, and that all text after the initial message headers is considered to be part of the message body.
This feature is available in Postfix 2.0 and later.
Mime input processing is enabled by default, and is needed in order to recognize MIME headers in message content.
Disable the conversion of 8BITMIME format to 7BIT format. Mime output conversion is needed when the destination does not advertise 8BITMIME support.
This feature is available in Postfix 2.0 and later.
Disable sending one bounce report per recipient.
The default, one per recipient, is what ezmlm needs.
This feature is available in Postfix 1.1 and later.
Disable the SMTP VRFY command. This stops some techniques used to harvest email addresses.
Example:
disable_vrfy_command = no
A debugging aid to artifically delay DNS responses.
This feature is available in Postfix 2.8.
The name of the dnsblog(8) service entry in master.cf. This service performs DNS white/blacklist lookups.
This feature is available in Postfix 2.8 and later.
Don't remove queue files and save them to the "saved" mail queue. This is a debugging aid. To inspect the envelope information and content of a Postfix queue file, use the postcat(1) command.
The sender address of postmaster notifications that are generated by the mail system. All mail to this address is silently discarded, in order to terminate mail bounce loops.
The maximal number of addresses remembered by the address duplicate filter for aliases(5) or virtual(5) alias expansion, or for showq(8) queue displays.
The sender_dependent_default_transport_maps search string that will be used instead of the null sender address.
This feature is available in Postfix 2.7 and later.
The recipient of mail addressed to the null address. Postfix does not accept such addresses in SMTP commands, but they may still be created locally as the result of configuration or software error.
The sender_dependent_relayhost_maps search string that will be used instead of the null sender address.
This feature is available in Postfix 2.5 and later. With earlier versions, sender_dependent_relayhost_maps lookups were skipped for the null sender address.
Report mail delivery errors to the address specified with the non-standard Errors-To: message header, instead of the envelope sender address (this feature is removed with Postfix version 2.2, is turned off by default with Postfix version 2.1, and is always turned on with older Postfix versions).
Enable long, non-repeating, queue IDs (queue file names). The benefit of non-repeating names is simpler logfile analysis and easier queue migration (there is no need to run "postsuper" to change queue file names that don't match their message file inode number).
Note: see below for how to prepare long queue file names for migration to Postfix ≤ 2.8.
Changing the parameter value to "yes" has the following effects:
Existing queue file names are not affected.
New queue files are created with names such as 3Pt2mN2VXxznjll. These are encoded in a 52-character alphabet that contains digits (0-9), upper-case letters (B-Z) and lower-case letters (b-z). For safety reasons the vowels (AEIOUaeiou) are excluded from the alphabet. The name format is: 6 or more characters for the time in seconds, 4 characters for the time in microseconds, the 'z'; the remainder is the file inode number encoded in the first 51 characters of the 52-character alphabet.
New messages have a Message-ID header with queueID@myhostname.
The mailq (postqueue -p) output has a wider Queue ID column. The number of whitespace-separated fields is not changed.
Changing the parameter value to "no" has the following effects:
Existing long queue file names are renamed to the short form (while running "postfix reload" or "postsuper").
New messages have a Message-ID header with YYYYMMDDHHMMSS.queueid@myhostname, where YYYYMMDDHHMMSS are the year, month, day, hour, minute and second.
The mailq (postqueue -p) output has the same format as with Postfix ≤ 2.8.
Before migration to Postfix ≤ 2.8, the following commands are required to convert long queue file names into short names:
# postfix stop # postconf enable_long_queue_ids=no # postsuper
Repeat the postsuper command until it reports no more queue file name changes.
This feature is available in Postfix 2.9 and later.
Enable support for the X-Original-To message header. This header is needed for multi-recipient mailboxes.
When this parameter is set to yes, the cleanup(8) daemon performs duplicate elimination on distinct pairs of (original recipient, rewritten recipient), and generates non-empty original recipient queue file records.
When this parameter is set to no, the cleanup(8) daemon performs duplicate elimination on the rewritten recipient address only, and generates empty original recipient queue file records.
This feature is available in Postfix 2.1 and later. With Postfix version 2.0, support for the X-Original-To message header is always turned on. Postfix versions before 2.0 have no support for the X-Original-To message header.
The recipient of postmaster notifications about mail delivery problems that are caused by policy, resource, software or protocol errors. These notifications are enabled with the notify_classes parameter.
The name of the error(8) pseudo delivery agent. This service always returns mail as undeliverable.
This feature is available in Postfix 2.0 and later.
Restrict the characters that the local(8) delivery agent allows in $name expansions of $command_execution_directory. Characters outside the allowed set are replaced by underscores.
This feature is available in Postfix 2.2 and later.
When delivering to an alias "aliasname" that has an "owner-aliasname" companion alias, set the envelope sender address to the expansion of the "owner-aliasname" alias. Normally, Postfix sets the envelope sender address to the name of the "owner-aliasname" alias.
The list of environment variables that a Postfix process will export to non-Postfix processes. The TZ variable is needed for sane time keeping on System-V-ish systems.
Specify a list of names and/or name=value pairs, separated by whitespace or comma. The name=value form is supported with Postfix version 2.1 and later.
Example:
export_environment = TZ PATH=/bin:/usr/bin
The maximal number of recipient addresses that Postfix will extract from message headers when mail is submitted with "sendmail -t".
This feature was removed in Postfix version 2.1.
Optional list of relay hosts for SMTP destinations that can't be found or that are unreachable. With Postfix 2.3 this parameter is renamed to smtp_fallback_relay.
By default, mail is returned to the sender when a destination is not found, and delivery is deferred when a destination is unreachable.
The fallback relays must be SMTP destinations. Specify a domain, host, host:port, [host]:port, [address] or [address]:port; the form [host] turns off MX lookups. If you specify multiple SMTP destinations, Postfix will try them in the specified order.
Note: before Postfix 2.2, do not use the fallback_relay feature when relaying mail for a backup or primary MX domain. Mail would loop between the Postfix MX host and the fallback_relay host when the final destination is unavailable.
Postfix version 2.2 and later will not use the fallback_relay feature for destinations that it is MX host for.
Optional message delivery transport that the local(8) delivery agent should use for names that are not found in the aliases(5) or UNIX password database.
The precedence of local(8) delivery features from high to low is: aliases, .forward files, mailbox_transport_maps, mailbox_transport, mailbox_command_maps, mailbox_command, home_mailbox, mail_spool_directory, fallback_transport_maps, fallback_transport and luser_relay.
Optional lookup tables with per-recipient message delivery transports for recipients that the local(8) delivery agent could not find in the aliases(5) or UNIX password database.
The precedence of local(8) delivery features from high to low is: aliases, .forward files, mailbox_transport_maps, mailbox_transport, mailbox_command_maps, mailbox_command, home_mailbox, mail_spool_directory, fallback_transport_maps, fallback_transport and luser_relay.
For safety reasons, this feature does not allow $number substitutions in regular expression maps.
This feature is available in Postfix 2.3 and later.
Optional list of destinations that are eligible for per-destination logfiles with mail that is queued to those destinations.
By default, Postfix maintains "fast flush" logfiles only for destinations that the Postfix SMTP server is willing to relay to (i.e. the default is: "fast_flush_domains = $relay_domains"; see the relay_domains parameter in the postconf(5) manual).
Specify a list of hosts or domains, "/file/name" patterns or "type:table" lookup tables, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when the domain or its parent domain appears as lookup key.
Specify "fast_flush_domains =" (i.e., empty) to disable the feature altogether.
The time after which an empty per-destination "fast flush" logfile is deleted.
You can specify the time as a number, or as a number followed by a letter that indicates the time unit: s=seconds, m=minutes, h=hours, d=days, w=weeks. The default time unit is days.
The time after which a non-empty but unread per-destination "fast flush" logfile needs to be refreshed. The contents of a logfile are refreshed by requesting delivery of all messages listed in the logfile.
You can specify the time as a number, or as a number followed by a letter that indicates the time unit: s=seconds, m=minutes, h=hours, d=days, w=weeks. The default time unit is hours.
Force specific internal tests to fail, to test the handling of errors that are difficult to reproduce otherwise.
The name of the flush(8) service. This service maintains per-destination logfiles with the queue file names of mail that is queued for those destinations.
This feature is available in Postfix 2.0 and later.
The maximal number of attempts to fork() a child process.
The delay between attempts to fork() a child process.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
Restrict the characters that the local(8) delivery agent allows in $name expansions of $forward_path. Characters outside the allowed set are replaced by underscores.
The local(8) delivery agent search list for finding a .forward file with user-specified delivery methods. The first file that is found is used.
The following $name expansions are done on forward_path before the search actually happens. The result of $name expansion is filtered with the character set that is specified with the forward_expansion_filter parameter.
Instead of $name you can also specify ${name} or $(name).
Examples:
forward_path = /var/forward/$user
forward_path =
/var/forward/$user/.forward$recipient_delimiter$extension,
/var/forward/$user/.forward
Update the local(8) delivery agent's idea of the Delivered-To: address (see prepend_delivered_header) only once, at the start of a delivery attempt; do not update the Delivered-To: address while expanding aliases or .forward files.
This feature is available in Postfix 2.3 and later. With older Postfix releases, the behavior is as if this parameter is set to "no". The old setting can be expensive with deeply nested aliases or .forward files. When an alias or .forward file changes the Delivered-To: address, it ties up one queue file and one cleanup process instance while mail is being forwarded.
The number of subdirectory levels for queue directories listed with the hash_queue_names parameter.
After changing the hash_queue_names or hash_queue_depth parameter, execute the command "postfix reload".
The names of queue directories that are split across multiple subdirectory levels.
Before Postfix version 2.2, the default list of hashed queues was significantly larger. Claims about improvements in file system technology suggest that hashing of the incoming and active queues is no longer needed. Fewer hashed directories speed up the time needed to restart Postfix.
After changing the hash_queue_names or hash_queue_depth parameter, execute the command "postfix reload".
The maximal number of address tokens are allowed in an address message header. Information that exceeds the limit is discarded. The limit is enforced by the cleanup(8) server.
Optional lookup tables for content inspection of primary non-MIME message headers, as specified in the header_checks(5) manual page.
The maximal amount of memory in bytes for storing a message header. If a header is larger, the excess is discarded. The limit is enforced by the cleanup(8) server.
Log warnings about problematic configuration settings, and provide helpful suggestions.
This feature is available in Postfix 2.0 and later.
Optional pathname of a mailbox file relative to a local(8) user's home directory.
Specify a pathname ending in "/" for qmail-style delivery.
The precedence of local(8) delivery features from high to low is: aliases, .forward files, mailbox_transport_maps, mailbox_transport, mailbox_command_maps, mailbox_command, home_mailbox, mail_spool_directory, fallback_transport_maps, fallback_transport and luser_relay.
Examples:
home_mailbox = Mailbox home_mailbox = Maildir/
The maximal number of Received: message headers that is allowed in the primary message headers. A message that exceeds the limit is bounced, in order to stop a mailer loop.
The location of Postfix HTML files that describe how to build, configure or operate a specific Postfix subsystem or feature.
Ignore DNS MX lookups that produce no response. By default, the Postfix SMTP client defers delivery and tries again after some delay. This behavior is required by the SMTP standard.
Specify "ignore_mx_lookup_error = yes" to force a DNS A record lookup instead. This violates the SMTP standard and can result in mis-delivery of mail.
The list of environment parameters that a Postfix process will import from a non-Postfix parent process. Examples of relevant parameters:
Specify a list of names and/or name=value pairs, separated by whitespace or comma. The name=value form is supported with Postfix version 2.1 and later.
Time to pause before accepting a new message, when the message arrival rate exceeds the message delivery rate. This feature is turned on by default (it's disabled on SCO UNIX due to an SCO bug).
With the default 100 SMTP server process limit, "in_flow_delay = 1s" limits the mail inflow to 100 messages per second above the number of messages delivered per second.
Specify 0 to disable the feature. Valid delays are 0..10.
The network interface addresses that this mail system receives mail on. Specify "all" to receive mail on all network interfaces (default), and "loopback-only" to receive mail on loopback network interfaces only (Postfix version 2.2 and later). The parameter also controls delivery of mail to user@[ip.address].
Note 1: you need to stop and start Postfix when this parameter changes.
Note 2: address information may be enclosed inside [], but this form is not required here.
When inet_interfaces specifies just one IPv4 and/or IPv6 address that is not a loopback address, the Postfix SMTP client will use this address as the IP source address for outbound mail. Support for IPv6 is available in Postfix version 2.2 and later.
On a multi-homed firewall with separate Postfix instances listening on the "inside" and "outside" interfaces, this can prevent each instance from being able to reach servers on the "other side" of the firewall. Setting smtp_bind_address to 0.0.0.0 avoids the potential problem for IPv4, and setting smtp_bind_address6 to :: solves the problem for IPv6.
A better solution for multi-homed firewalls is to leave inet_interfaces at the default value and instead use explicit IP addresses in the master.cf SMTP server definitions. This preserves the Postfix SMTP client's loop detection, by ensuring that each side of the firewall knows that the other IP address is still the same host. Setting $inet_interfaces to a single IPv4 and/or IPV6 address is primarily useful with virtual hosting of domains on secondary IP addresses, when each IP address serves a different domain (and has a different $myhostname setting).
See also the proxy_interfaces parameter, for network addresses that are forwarded to Postfix by way of a proxy or address translator.
Examples:
inet_interfaces = all (DEFAULT) inet_interfaces = loopback-only (Postfix version 2.2 and later) inet_interfaces = 127.0.0.1 inet_interfaces = 127.0.0.1, [::1] (Postfix version 2.2 and later) inet_interfaces = 192.168.1.2, 127.0.0.1
The Internet protocols Postfix will attempt to use when making or accepting connections. Specify one or more of "ipv4" or "ipv6", separated by whitespace or commas. The form "all" is equivalent to "ipv4, ipv6" or "ipv4", depending on whether the operating system implements IPv6.
This feature is available in Postfix 2.2 and later.
Note: you MUST stop and start Postfix after changing this parameter.
On systems that pre-date IPV6_V6ONLY support (RFC 3493), an IPv6 server will also accept IPv4 connections, even when IPv4 is turned off with the inet_protocols parameter. On systems with IPV6_V6ONLY support, Postfix will use separate server sockets for IPv6 and IPv4, and each will accept only connections for the corresponding protocol.
When IPv4 support is enabled via the inet_protocols parameter, Postfix will to DNS type A record lookups, and will convert IPv4-in-IPv6 client IP addresses (::ffff:1.2.3.4) to their original IPv4 form (1.2.3.4). The latter is needed on hosts that pre-date IPV6_V6ONLY support (RFC 3493).
When IPv6 support is enabled via the inet_protocols parameter, Postfix will do DNS type AAAA record lookups.
When both IPv4 and IPv6 support are enabled, the Postfix SMTP client will attempt to connect via IPv6 before attempting to use IPv4.
Examples:
inet_protocols = ipv4 (DEFAULT) inet_protocols = all inet_protocols = ipv6 inet_protocols = ipv4, ipv6
The initial per-destination concurrency level for parallel delivery to the same destination. With per-destination recipient limit > 1, a destination is a domain, otherwise it is a recipient.
Use transport_initial_destination_concurrency to specify a transport-specific override, where transport is the master.cf name of the message delivery transport (Postfix 2.5 and later).
Warning: with concurrency of 1, one bad message can be enough to block all mail to a site.
What categories of Postfix-generated mail are subject to before-queue content inspection by non_smtpd_milters, header_checks and body_checks. Specify zero or more of the following, separated by whitespace or comma.
NOTE: It's generally not safe to enable content inspection of Postfix-generated email messages. The user is warned.
This feature is available in Postfix 2.3 and later.
The numerical Postfix SMTP server response code when the client HELO or EHLO command parameter is rejected by the reject_invalid_helo_hostname restriction.
Do not change this unless you have a complete understanding of RFC 2821.
The time after which a client closes an idle internal communication channel. The purpose is to allow servers to terminate voluntarily after they become idle. This is used, for example, by the address resolving and rewriting clients.
With Postfix 2.4 the default value was reduced from 100s to 5s.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The time limit for sending or receiving information over an internal communication channel. The purpose is to break out of deadlock situations. If the time limit is exceeded the software aborts with a fatal error.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The time after which a client closes an active internal communication channel. The purpose is to allow servers to terminate voluntarily after reaching their client limit. This is used, for example, by the address resolving and rewriting clients.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
This feature is available in Postfix 2.1 and later.
Upon input, long lines are chopped up into pieces of at most this length; upon delivery, long lines are reconstructed.
The LMTP-specific version of the smtp_address_preference configuration parameter. See there for details.
This feature is available in Postfix 2.8 and later.
When an LMTP server announces no DSN support, assume that the server performs final delivery, and send "delivered" delivery status notifications instead of "relayed". The default setting is backwards compatible to avoid the infinetisimal possibility of breaking existing LMTP-based content filters.
The LMTP-specific version of the smtp_bind_address configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_bind_address6 configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_body_checks configuration parameter. See there for details.
This feature is available in Postfix 2.5 and later.
Keep Postfix LMTP client connections open for up to $max_idle seconds. When the LMTP client receives a request for the same connection the connection is reused.
This parameter is available in Postfix version 2.2 and earlier. With Postfix version 2.3 and later, see lmtp_connection_cache_on_demand, lmtp_connection_cache_destinations, or lmtp_connection_reuse_time_limit.
The effectiveness of cached connections will be determined by the number of LMTP servers in use, and the concurrency limit specified for the LMTP client. Cached connections are closed under any of the following conditions:
Most of these limitations will be removed after Postfix implements a connection cache that is shared among multiple LMTP client programs.
The LMTP-specific version of the smtp_cname_overrides_servername configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP client time limit for completing a TCP connection, or zero (use the operating system built-in time limit). When no connection can be made within the deadline, the LMTP client tries the next address on the mail exchanger list.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
Example:
lmtp_connect_timeout = 30s
The LMTP-specific version of the smtp_connection_cache_destinations configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_connection_cache_on_demand configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_connection_cache_time_limit configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_connection_reuse_time_limit configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP client time limit for sending the LMTP ".", and for receiving the server response. When no response is received within the deadline, a warning is logged that the mail may be delivered multiple times.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The LMTP client time limit for sending the LMTP DATA command, and for receiving the server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The LMTP client time limit for sending the LMTP message content. When the connection stalls for more than $lmtp_data_xfer_timeout the LMTP client terminates the transfer.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The LMTP-specific version of the smtp_defer_if_no_mx_address_found configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The maximal number of parallel deliveries to the same destination via the lmtp message delivery transport. This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
The maximal number of recipients per message for the lmtp message delivery transport. This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
Setting this parameter to a value of 1 changes the meaning of lmtp_destination_concurrency_limit from concurrency per domain into concurrency per recipient.
Lookup tables, indexed by the remote LMTP server address, with case insensitive lists of LHLO keywords (pipelining, starttls, auth, etc.) that the LMTP client will ignore in the LHLO response from a remote LMTP server. See lmtp_discard_lhlo_keywords for details. The table is not indexed by hostname for consistency with smtpd_discard_ehlo_keyword_address_maps.
This feature is available in Postfix 2.3 and later.
A case insensitive list of LHLO keywords (pipelining, starttls, auth, etc.) that the LMTP client will ignore in the LHLO response from a remote LMTP server.
This feature is available in Postfix 2.3 and later.
Notes:
Specify the silent-discard pseudo keyword to prevent this action from being logged.
Use the lmtp_discard_lhlo_keyword_address_maps feature to discard LHLO keywords selectively.
The LMTP-specific version of the smtp_dns_resolver_options configuration parameter. See there for details.
This feature is available in Postfix 2.8 and later.
The LMTP-specific version of the smtp_enforce_tls configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_generic_maps configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_header_checks configuration parameter. See there for details.
This feature is available in Postfix 2.5 and later.
The LMTP-specific version of the smtp_host_lookup configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The hostname to send in the LMTP LHLO command.
The default value is the machine hostname. Specify a hostname or [ip.add.re.ss].
This information can be specified in the main.cf file for all LMTP clients, or it can be specified in the master.cf file for a specific client, for example:
/etc/postfix/master.cf:
mylmtp ... lmtp -o lmtp_lhlo_name=foo.bar.com
This feature is available in Postfix 2.3 and later.
The LMTP client time limit for sending the LHLO command, and for receiving the initial server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The LMTP-specific version of the smtp_line_length_limit configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP client time limit for sending the MAIL FROM command, and for receiving the server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The LMTP-specific version of the smtp_mime_header_checks configuration parameter. See there for details.
This feature is available in Postfix 2.5 and later.
The LMTP-specific version of the smtp_mx_address_limit configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_mx_session_limit configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_nested_header_checks configuration parameter. See there for details.
This feature is available in Postfix 2.5 and later.
The LMTP-specific version of the smtp_per_record_deadline configuration parameter. See there for details.
This feature is available in Postfix 2.9 and later.
The LMTP-specific version of the smtp_pix_workaround_delay_time configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_pix_workaround_maps configuration parameter. See there for details.
This feature is available in Postfix 2.4 and later.
The LMTP-specific version of the smtp_pix_workaround_threshold_time configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_pix_workaround configuration parameter. See there for details.
This feature is available in Postfix 2.4 and later.
The LMTP client time limit for sending the QUIT command, and for receiving the server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The LMTP-specific version of the smtp_quote_rfc821_envelope configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_randomize_addresses configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP client time limit for sending the RCPT TO command, and for receiving the server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The LMTP-specific version of the smtp_reply_filter configuration parameter. See there for details.
This feature is available in Postfix 2.7 and later.
The LMTP client time limit for sending the RSET command, and for receiving the server response. The LMTP client sends RSET in order to finish a recipient address probe, or to verify that a cached connection is still alive.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The LMTP-specific version of the smtp_sasl_auth_cache_name configuration parameter. See there for details.
This feature is available in Postfix 2.5 and later.
The LMTP-specific version of the smtp_sasl_auth_cache_time configuration parameter. See there for details.
This feature is available in Postfix 2.5 and later.
Enable SASL authentication in the Postfix LMTP client.
The LMTP-specific version of the smtp_sasl_auth_soft_bounce configuration parameter. See there for details.
This feature is available in Postfix 2.5 and later.
The LMTP-specific version of the smtp_sasl_mechanism_filter configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
Optional LMTP client lookup tables with one username:password entry per host or domain. If a remote host or domain has no username:password entry, then the Postfix LMTP client will not attempt to authenticate to the remote host.
Implementation-specific information that is passed through to the SASL plug-in implementation that is selected with lmtp_sasl_type. Typically this specifies the name of a configuration file or rendezvous point.
This feature is available in Postfix 2.3 and later.
SASL security options; as of Postfix 2.3 the list of available features depends on the SASL client implementation that is selected with lmtp_sasl_type.
The following security features are defined for the cyrus client SASL implementation:
Example:
lmtp_sasl_security_options = noplaintext
The LMTP-specific version of the smtp_sasl_tls_security_options configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_sasl_tls_verified_security_options configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The SASL plug-in type that the Postfix LMTP client should use for authentication. The available types are listed with the "postconf -A" command.
This feature is available in Postfix 2.3 and later.
Send an XFORWARD command to the LMTP server when the LMTP LHLO server response announces XFORWARD support. This allows an lmtp(8) delivery agent, used for content filter message injection, to forward the name, address, protocol and HELO name of the original client to the content filter and downstream queuing LMTP server. Before you change the value to yes, it is best to make sure that your content filter supports this command.
This feature is available in Postfix 2.1 and later.
The LMTP-specific version of the smtp_sender_dependent_authentication configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_skip_5xx_greeting configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
Wait for the response to the LMTP QUIT command.
The LMTP-specific version of the smtp_starttls_timeout configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The default TCP port that the Postfix LMTP client connects to.
The LMTP-specific version of the smtp_tls_CAfile configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_CApath configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_block_early_mail_reply configuration parameter. See there for details.
This feature is available in Postfix 2.7 and later.
The LMTP-specific version of the smtp_tls_cert_file configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_ciphers configuration parameter. See there for details.
This feature is available in Postfix 2.6 and later.
The LMTP-specific version of the smtp_tls_dcert_file configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_dkey_file configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_eccert_file configuration parameter. See there for details.
This feature is available in Postfix 2.6 and later, when Postfix is compiled and linked with OpenSSL 1.0.0 or later.
The LMTP-specific version of the smtp_tls_eckey_file configuration parameter. See there for details.
This feature is available in Postfix 2.6 and later, when Postfix is compiled and linked with OpenSSL 1.0.0 or later.
The LMTP-specific version of the smtp_tls_enforce_peername configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_exclude_ciphers configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_fingerprint_cert_match configuration parameter. See there for details.
This feature is available in Postfix 2.5 and later.
The LMTP-specific version of the smtp_tls_fingerprint_digest configuration parameter. See there for details.
This feature is available in Postfix 2.5 and later.
The LMTP-specific version of the smtp_tls_key_file configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_loglevel configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_mandatory_ciphers configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_mandatory_exclude_ciphers configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_mandatory_protocols configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_note_starttls_offer configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_per_site configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_policy_maps configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_protocols configuration parameter. See there for details.
This feature is available in Postfix 2.6 and later.
The LMTP-specific version of the smtp_tls_scert_verifydepth configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_secure_cert_match configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_security_level configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_session_cache_database configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_session_cache_timeout configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_tls_verify_cert_match configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP-specific version of the smtp_use_tls configuration parameter. See there for details.
This feature is available in Postfix 2.3 and later.
The LMTP client time limit for sending the XFORWARD command, and for receiving the server response.
In case of problems the client does NOT try the next address on the mail exchanger list.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
This feature is available in Postfix 2.1 and later.
Optional shell program for local(8) delivery to non-Postfix command. By default, non-Postfix commands are executed directly; commands are given to given to the default shell (typically, /bin/sh) only when they contain shell meta characters or shell built-in commands.
"sendmail's restricted shell" (smrsh) is what most people will use in order to restrict what programs can be run from e.g. .forward files (smrsh is part of the Sendmail distribution).
Note: when a shell program is specified, it is invoked even when the command contains no shell built-in commands or meta characters.
Example:
local_command_shell = /some/where/smrsh -c local_command_shell = /bin/bash -c
The maximal number of parallel deliveries via the local mail delivery transport to the same recipient (when "local_destination_recipient_limit = 1") or the maximal number of parallel deliveries to the same local domain (when "local_destination_recipient_limit > 1"). This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
A low limit of 2 is recommended, just in case someone has an expensive shell command in a .forward file or in an alias (e.g., a mailing list manager). You don't want to run lots of those at the same time.
The maximal number of recipients per message delivery via the local mail delivery transport. This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
Setting this parameter to a value > 1 changes the meaning of local_destination_concurrency_limit from concurrency per recipient into concurrency per domain.
Rewrite message header addresses in mail from these clients and update incomplete addresses with the domain name in $myorigin or $mydomain; either don't rewrite message headers from other clients at all, or rewrite message headers and update incomplete addresses with the domain specified in the remote_header_rewrite_domain parameter.
See the append_at_myorigin and append_dot_mydomain parameters for details of how domain names are appended to incomplete addresses.
Specify a list of zero or more of the following:
Examples:
The Postfix < 2.2 backwards compatible setting: always rewrite message headers, and always append my own domain to incomplete header addresses.
local_header_rewrite_clients = static:all
The purist (and default) setting: rewrite headers only in mail from Postfix sendmail and in SMTP mail from this machine.
local_header_rewrite_clients = permit_inet_interfaces
The intermediate setting: rewrite header addresses and append $myorigin or $mydomain information only with mail from Postfix sendmail, from local clients, or from authorized SMTP clients.
Note: this setting will not prevent remote mail header address rewriting when mail from a remote client is forwarded by a neighboring system.
local_header_rewrite_clients = permit_mynetworks,
permit_sasl_authenticated permit_tls_clientcerts
check_address_map hash:/etc/postfix/pop-before-smtp
Lookup tables with all names or addresses of local recipients: a recipient address is local when its domain matches $mydestination, $inet_interfaces or $proxy_interfaces. Specify @domain as a wild-card for domains that do not have a valid recipient list. Technically, tables listed with $local_recipient_maps are used as lists: Postfix needs to know only if a lookup string is found or not, but it does not use the result from table lookup.
If this parameter is non-empty (the default), then the Postfix SMTP server will reject mail for unknown local users.
To turn off local recipient checking in the Postfix SMTP server, specify "local_recipient_maps =" (i.e. empty).
The default setting assumes that you use the default Postfix local delivery agent for local delivery. You need to update the local_recipient_maps setting if:
Details are described in the LOCAL_RECIPIENT_README file.
Beware: if the Postfix SMTP server runs chrooted, you need to access the passwd file via the proxymap(8) service, in order to overcome chroot access restrictions. The alternative, maintaining a copy of the system password file in the chroot jail is not practical.
Examples:
local_recipient_maps =
The default mail delivery transport and next-hop destination for final delivery to domains listed with mydestination, and for [ipaddress] destinations that match $inet_interfaces or $proxy_interfaces. This information can be overruled with the transport(5) table.
By default, local mail is delivered to the transport called "local", which is just the name of a service that is defined the master.cf file.
Specify a string of the form transport:nexthop, where transport is the name of a mail delivery transport defined in master.cf. The :nexthop destination is optional; its syntax is documented in the manual page of the corresponding delivery agent.
Beware: if you override the default local delivery agent then you need to review the LOCAL_RECIPIENT_README document, otherwise the SMTP server may reject mail for local recipients.
Optional catch-all destination for unknown local(8) recipients. By default, mail for unknown recipients in domains that match $mydestination, $inet_interfaces or $proxy_interfaces is returned as undeliverable.
The following $name expansions are done on luser_relay:
Instead of $name you can also specify ${name} or $(name).
Note: luser_relay works only for the Postfix local(8) delivery agent.
Note: if you use this feature for accounts not in the UNIX password file, then you must specify "local_recipient_maps =" (i.e. empty) in the main.cf file, otherwise the Postfix SMTP server will reject mail for non-UNIX accounts with "User unknown in local recipient table".
Examples:
luser_relay = [email protected] luser_relay = [email protected] luser_relay = admin+$local
The mail system name that is displayed in Received: headers, in the SMTP greeting banner, and in bounced mail.
The UNIX system account that owns the Postfix queue and most Postfix daemon processes. Specify the name of a user account that does not share a group with other accounts and that owns no other files or processes on the system. In particular, don't specify nobody or daemon. PLEASE USE A DEDICATED USER ID AND GROUP ID.
When this parameter value is changed you need to re-run "postfix set-permissions" (with Postfix version 2.0 and earlier: "/etc/postfix/post-install set-permissions".
The Postfix release date, in "YYYYMMDD" format.
The directory where local(8) UNIX-style mailboxes are kept. The default setting depends on the system type. Specify a name ending in / for maildir-style delivery.
Note: maildir delivery is done with the privileges of the recipient. If you use the mail_spool_directory setting for maildir style delivery, then you must create the top-level maildir directory in advance. Postfix will not create it.
Examples:
mail_spool_directory = /var/mail mail_spool_directory = /var/spool/mail
The version of the mail system. Stable releases are named major.minor.patchlevel. Experimental releases also include the release date. The version string can be used in, for example, the SMTP greeting banner.
Optional external command that the local(8) delivery agent should use for mailbox delivery. The command is run with the user ID and the primary group ID privileges of the recipient. Exception: command delivery for root executes with $default_privs privileges. This is not a problem, because 1) mail for root should always be aliased to a real user and 2) don't log in as root, use "su" instead.
The following environment variables are exported to the command:
Unlike other Postfix configuration parameters, the mailbox_command parameter is not subjected to $name substitutions. This is to make it easier to specify shell syntax (see example below).
If you can, avoid shell meta characters because they will force Postfix to run an expensive shell process. If you're delivering via Procmail then running a shell won't make a noticeable difference in the total cost.
Note: if you use the mailbox_command feature to deliver mail system-wide, you must set up an alias that forwards mail for root to a real user.
The precedence of local(8) delivery features from high to low is: aliases, .forward files, mailbox_transport_maps, mailbox_transport, mailbox_command_maps, mailbox_command, home_mailbox, mail_spool_directory, fallback_transport_maps, fallback_transport and luser_relay.
Examples:
mailbox_command = /some/where/procmail
mailbox_command = /some/where/procmail -a "$EXTENSION"
mailbox_command = /some/where/maildrop -d "$USER"
-f "$SENDER" "$EXTENSION"
Optional lookup tables with per-recipient external commands to use for local(8) mailbox delivery. Behavior is as with mailbox_command.
The precedence of local(8) delivery features from high to low is: aliases, .forward files, mailbox_transport_maps, mailbox_transport, mailbox_command_maps, mailbox_command, home_mailbox, mail_spool_directory, fallback_transport_maps, fallback_transport and luser_relay.
How to lock a UNIX-style local(8) mailbox before attempting delivery. For a list of available file locking methods, use the "postconf -l" command.
This setting is ignored with maildir style delivery, because such deliveries are safe without explicit locks.
Note: The dotlock method requires that the recipient UID or GID has write access to the parent directory of the mailbox file.
Note: the default setting of this parameter is system dependent.
The maximal size of any local(8) individual mailbox or maildir file, or zero (no limit). In fact, this limits the size of any file that is written to upon local delivery, including files written by external commands that are executed by the local(8) delivery agent.
This limit must not be smaller than the message size limit.
Optional message delivery transport that the local(8) delivery agent should use for mailbox delivery to all local recipients, whether or not they are found in the UNIX passwd database.
The precedence of local(8) delivery features from high to low is: aliases, .forward files, mailbox_transport_maps, mailbox_transport, mailbox_command_maps, mailbox_command, home_mailbox, mail_spool_directory, fallback_transport_maps, fallback_transport and luser_relay.
Optional lookup tables with per-recipient message delivery transports to use for local(8) mailbox delivery, whether or not the recipients are found in the UNIX passwd database.
The precedence of local(8) delivery features from high to low is: aliases, .forward files, mailbox_transport_maps, mailbox_transport, mailbox_command_maps, mailbox_command, home_mailbox, mail_spool_directory, fallback_transport_maps, fallback_transport and luser_relay.
For safety reasons, this feature does not allow $number substitutions in regular expression maps.
This feature is available in Postfix 2.3 and later.
Sendmail compatibility feature that specifies where the Postfix mailq(1) command is installed. This command can be used to list the Postfix mail queue.
Where the Postfix manual pages are installed.
Obsolete feature: use the reject_rbl_client feature instead.
The numerical Postfix SMTP server response code when a remote SMTP client request is blocked by the reject_rbl_client, reject_rhsbl_client, reject_rhsbl_reverse_client, reject_rhsbl_sender or reject_rhsbl_recipient restriction.
Do not change this unless you have a complete understanding of RFC 2821.
What addresses are subject to address masquerading.
By default, address masquerading is limited to envelope sender addresses, and to header sender and header recipient addresses. This allows you to use address masquerading on a mail gateway while still being able to forward mail to users on individual machines.
Specify zero or more of: envelope_sender, envelope_recipient, header_sender, header_recipient
Optional list of domains whose subdomain structure will be stripped off in email addresses.
The list is processed left to right, and processing stops at the first match. Thus,
masquerade_domains = foo.example.com example.com
strips "[email protected]" to "[email protected]", but strips "[email protected]" to "[email protected]".
A domain name prefixed with ! means do not masquerade this domain or its subdomains. Thus,
masquerade_domains = !foo.example.com example.com
does not change "[email protected]" or "[email protected]", but strips "[email protected]" to "[email protected]".
Note: with Postfix version 2.2, message header address masquerading happens only when message header address rewriting is enabled:
To get the behavior before Postfix version 2.2, specify "local_header_rewrite_clients = static:all".
Example:
masquerade_domains = $mydomain
Optional list of user names that are not subjected to address masquerading, even when their address matches $masquerade_domains.
By default, address masquerading makes no exceptions.
Specify a list of user names, "/file/name" or "type:table" patterns, separated by commas and/or whitespace. The list is matched left to right, and the search stops on the first match. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a name matches a lookup key (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude a name from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
Examples:
masquerade_exceptions = root, mailer-daemon masquerade_exceptions = root
Selectively disable master(8) listener ports by service type or by service name and type. Specify a list of service types ("inet", "unix", "fifo", or "pass") or "name.type" tuples, where "name" is the first field of a master.cf entry and "type" is a service type. As with other Postfix matchlists, a search stops at the first match. Specify "!pattern" to exclude a service from the list. By default, all master(8) listener ports are enabled.
Note: this feature does not support "/file/name" or "type:table" patterns, nor does it support wildcards such as "*" or "all". This is intentional.
Examples:
# Turn on all master(8) listener ports (the default). master_service_disable = # Turn off only the main SMTP listener port. master_service_disable = smtp.inet # Turn off all TCP/IP listener ports. master_service_disable = inet # Turn off all TCP/IP listener ports except "foo". master_service_disable = !foo.inet, inet
This feature is available in Postfix 2.6 and later.
The maximum amount of time that an idle Postfix daemon process waits for an incoming connection before terminating voluntarily. This parameter is ignored by the Postfix queue manager and by other long-lived Postfix daemon processes.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The maximal number of incoming connections that a Postfix daemon process will service before terminating voluntarily. This parameter is ignored by the Postfix queue manager and by other long-lived Postfix daemon processes.
The maximal time between attempts to deliver a deferred message.
This parameter should be set to a value greater than or equal to $minimal_backoff_time. See also $queue_run_delay.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The maximal time a message is queued before it is sent back as undeliverable.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is d (days).
Specify 0 when mail delivery should be tried only once.
The set of characters that Postfix will reject in message content. The usual C-like escape sequences are recognized: \a \b \f \n \r \t \v \ddd (up to three octal digits) and \\.
Example:
message_reject_characters = \0
This feature is available in Postfix 2.3 and later.
The maximal size in bytes of a message, including envelope information.
Note: be careful when making changes. Excessively small values will result in the loss of non-delivery notifications, when a bounce message size exceeds the local or remote MTA's message size limit.
The set of characters that Postfix will remove from message content. The usual C-like escape sequences are recognized: \a \b \f \n \r \t \v \ddd (up to three octal digits) and \\.
Example:
message_strip_characters = \0
This feature is available in Postfix 2.3 and later.
The time limit for sending an SMTP command to a Milter (mail filter) application, and for receiving the response.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit).
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
This feature is available in Postfix 2.3 and later.
The macros that are sent to Milter (mail filter) applications after completion of an SMTP connection. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.3 and later.
The time limit for connecting to a Milter (mail filter) application, and for negotiating protocol options.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit).
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
This feature is available in Postfix 2.3 and later.
The time limit for sending message content to a Milter (mail filter) application, and for receiving the response.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit).
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
This feature is available in Postfix 2.3 and later.
The macros that are sent to version 4 or higher Milter (mail filter) applications after the SMTP DATA command. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.3 and later.
The default action when a Milter (mail filter) application is unavailable or mis-configured. Specify one of the following:
This feature is available in Postfix 2.3 and later.
The macros that are sent to Milter (mail filter) applications after the message end-of-data. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.3 and later.
The macros that are sent to Milter (mail filter) applications after the end of the message header. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.5 and later.
Optional lookup tables for content inspection of message headers that are produced by Milter applications. See the header_checks(5) manual page available actions. Currently, PREPEND is not implemented.
The following example sends all mail that is marked as SPAM to a spam handling machine. Note that matches are case-insensitive by default.
/etc/postfix/main.cf:
milter_header_checks = pcre:/etc/postfix/milter_header_checks
/etc/postfix/milter_header_checks:
/^X-SPAM-FLAG:\s+YES/ FILTER mysmtp:sanitizer.example.com:25
The milter_header_checks mechanism could also be used for whitelisting. For example it could be used to skip heavy content inspection for DKIM-signed mail from known friendly domains.
This feature is available in Postfix 2.7, and as an optional patch for Postfix 2.6.
The macros that are sent to Milter (mail filter) applications after the SMTP HELO or EHLO command. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.3 and later.
The {daemon_name} macro value for Milter (mail filter) applications. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.3 and later.
The {v} macro value for Milter (mail filter) applications. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.3 and later.
The macros that are sent to Milter (mail filter) applications after the SMTP MAIL FROM command. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.3 and later.
The mail filter protocol version and optional protocol extensions for communication with a Milter application; prior to Postfix 2.6 the default protocol is 2. Postfix sends this version number during the initial protocol handshake. It should match the version number that is expected by the mail filter application (or by its Milter library).
Protocol versions:
Protocol extensions:
This feature is available in Postfix 2.3 and later.
The macros that are sent to Milter (mail filter) applications after the SMTP RCPT TO command. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.3 and later.
The macros that are sent to version 3 or higher Milter (mail filter) applications after an unknown SMTP command. See MILTER_README for a list of available macro names and their meanings.
This feature is available in Postfix 2.3 and later.
The maximal length of MIME multipart boundary strings. The MIME processor is unable to distinguish between boundary strings that do not differ in the first $mime_boundary_length_limit characters.
This feature is available in Postfix 2.0 and later.
Optional lookup tables for content inspection of MIME related message headers, as described in the header_checks(5) manual page.
This feature is available in Postfix 2.0 and later.
The maximal recursion level that the MIME processor will handle. Postfix refuses mail that is nested deeper than the specified limit.
This feature is available in Postfix 2.0 and later.
The minimal time between attempts to deliver a deferred message; prior to Postfix 2.4 the default value was 1000s.
This parameter also limits the time an unreachable destination is kept in the short-term, in-memory, destination status cache.
This parameter should be set greater than or equal to $queue_run_delay. See also $maximal_backoff_time.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
An optional list of non-default Postfix configuration directories; these directories belong to additional Postfix instances that share the Postfix executable files and documentation with the default Postfix instance, and that are started, stopped, etc., together with the default Postfix instance. Specify a list of pathnames separated by comma or whitespace.
When $multi_instance_directories is empty, the postfix(1) command runs in single-instance mode and operates on a single Postfix instance only. Otherwise, the postfix(1) command runs in multi-instance mode and invokes the multi-instance manager specified with the multi_instance_wrapper parameter. The multi-instance manager in turn executes postfix(1) commands for the default instance and for all Postfix instances in $multi_instance_directories.
Currently, this parameter setting is ignored except for the default main.cf file.
This feature is available in Postfix 2.6 and later.
Allow this Postfix instance to be started, stopped, etc., by a multi-instance manager. By default, new instances are created in a safe state that prevents them from being started inadvertently. This parameter is reserved for the multi-instance manager.
This feature is available in Postfix 2.6 and later.
The optional instance group name of this Postfix instance. A group identifies closely-related Postfix instances that the multi-instance manager can start, stop, etc., as a unit. This parameter is reserved for the multi-instance manager.
This feature is available in Postfix 2.6 and later.
The optional instance name of this Postfix instance. This name becomes also the default value for the syslog_name parameter.
This feature is available in Postfix 2.6 and later.
The pathname of a multi-instance manager command that the postfix(1) command invokes when the multi_instance_directories parameter value is non-empty. The pathname may be followed by initial command arguments separated by whitespace; shell metacharacters such as quotes are not supported in this context.
The postfix(1) command invokes the manager command with the postfix(1) non-option command arguments on the manager command line, and with all installation configuration parameters exported into the manager command process environment. The manager command in turn invokes the postfix(1) command for individual Postfix instances as "postfix -c config_directory command".
This feature is available in Postfix 2.6 and later.
The numerical Postfix SMTP server response code when a remote SMTP client request is blocked by the reject_multi_recipient_bounce restriction.
Do not change this unless you have a complete understanding of RFC 2821.
This feature is available in Postfix 2.1 and later.
The list of domains that are delivered via the $local_transport mail delivery transport. By default this is the Postfix local(8) delivery agent which looks up all recipients in /etc/passwd and /etc/aliases. The SMTP server validates recipient addresses with $local_recipient_maps and rejects non-existent recipients. See also the local domain class in the ADDRESS_CLASS_README file.
The default mydestination value specifies names for the local machine only. On a mail domain gateway, you should also include $mydomain.
The $local_transport delivery method is also selected for mail addressed to user@[the.net.work.address] of the mail system (the IP addresses specified with the inet_interfaces and proxy_interfaces parameters).
Warnings:
Do not specify the names of virtual domains - those domains are specified elsewhere. See VIRTUAL_README for more information.
Do not specify the names of domains that this machine is backup MX host for. See STANDARD_CONFIGURATION_README for how to set up backup MX hosts.
By default, the Postfix SMTP server rejects mail for recipients not listed with the local_recipient_maps parameter. See the postconf(5) manual for a description of the local_recipient_maps and unknown_local_recipient_reject_code parameters.
Specify a list of host or domain names, "/file/name" or "type:table" patterns, separated by commas and/or whitespace. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a name matches a lookup key (the lookup result is ignored). Continue long lines by starting the next line with whitespace.
Examples:
mydestination = $myhostname, localhost.$mydomain $mydomain mydestination = $myhostname, localhost.$mydomain www.$mydomain, ftp.$mydomain
The internet domain name of this mail system. The default is to use $myhostname minus the first component, or "localdomain" (Postfix 2.3 and later). $mydomain is used as a default value for many other configuration parameters.
Example:
mydomain = domain.tld
The internet hostname of this mail system. The default is to use the fully-qualified domain name (FQDN) from gethostname(), or to use the non-FQDN result from gethostname() and append ".$mydomain". $myhostname is used as a default value for many other configuration parameters.
Example:
myhostname = host.example.com
The list of "trusted" SMTP clients that have more privileges than "strangers".
In particular, "trusted" SMTP clients are allowed to relay mail through Postfix. See the smtpd_recipient_restrictions parameter description in the postconf(5) manual.
You can specify the list of "trusted" network addresses by hand or you can let Postfix do it for you (which is the default). See the description of the mynetworks_style parameter for more information.
If you specify the mynetworks list by hand, Postfix ignores the mynetworks_style setting.
Specify a list of network addresses or network/netmask patterns, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace.
The netmask specifies the number of bits in the network part of a host address. You can also specify "/file/name" or "type:table" patterns. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a table entry matches a lookup string (the lookup result is ignored).
The list is matched left to right, and the search stops on the first match. Specify "!pattern" to exclude an address or network block from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
Note: IP version 6 address information must be specified inside [] in the mynetworks value, and in files specified with "/file/name". IP version 6 addresses contain the ":" character, and would otherwise be confused with a "type:table" pattern.
Examples:
mynetworks = 127.0.0.0/8 168.100.189.0/28 mynetworks = !192.168.0.1, 192.168.0.0/28 mynetworks = 127.0.0.0/8 168.100.189.0/28 [::1]/128 [2001:240:587::]/64 mynetworks = $config_directory/mynetworks mynetworks = hash:/etc/postfix/network_table
The method to generate the default value for the mynetworks parameter. This is the list of trusted networks for relay access control etc.
Specify "mynetworks_style = host" when Postfix should "trust" only the local machine.
Specify "mynetworks_style = subnet" when Postfix should "trust" SMTP clients in the same IP subnetworks as the local machine. On Linux, this works correctly only with interfaces specified with the "ifconfig" command.
Specify "mynetworks_style = class" when Postfix should "trust" SMTP clients in the same IP class A/B/C networks as the local machine. Don't do this with a dialup site - it would cause Postfix to "trust" your entire provider's network. Instead, specify an explicit mynetworks list by hand, as described with the mynetworks configuration parameter.
The domain name that locally-posted mail appears to come from, and that locally posted mail is delivered to. The default, $myhostname, is adequate for small sites. If you run a domain with multiple machines, you should (1) change this to $mydomain and (2) set up a domain-wide alias database that aliases each user to [email protected].
Example:
myorigin = $mydomain
Optional lookup tables for content inspection of non-MIME message headers in attached messages, as described in the header_checks(5) manual page.
This feature is available in Postfix 2.0 and later.
Sendmail compatibility feature that specifies the location of the newaliases(1) command. This command can be used to rebuild the local(8) aliases(5) database.
The numerical Postfix SMTP server reply code when a client request is rejected by the reject_non_fqdn_helo_hostname, reject_non_fqdn_sender or reject_non_fqdn_recipient restriction.
A list of Milter (mail filter) applications for new mail that does not arrive via the Postfix smtpd(8) server. This includes local submission via the sendmail(1) command line, new mail that arrives via the Postfix qmqpd(8) server, and old mail that is re-injected into the queue with "postsuper -r". Specify space or comma as separator. See the MILTER_README document for details.
This feature is available in Postfix 2.3 and later.
The list of error classes that are reported to the postmaster. The default is to report only the most serious problems. The paranoid may wish to turn on the policy (UCE and mail relaying) and protocol error (broken mail software) reports.
NOTE: postmaster notifications may contain confidential information such as SASL passwords or message content. It is the system administrator's responsibility to treat such information with care.
The error classes are:
Examples:
notify_classes = bounce, delay, policy, protocol, resource, software notify_classes = 2bounce, resource, software
Give special treatment to owner-listname and listname-request address localparts: don't split such addresses when the recipient_delimiter is set to "-". This feature is useful for mailing lists.
What Postfix features match subdomains of "domain.tld" automatically, instead of requiring an explicit ".domain.tld" pattern. This is planned backwards compatibility: eventually, all Postfix features are expected to require explicit ".domain.tld" style patterns when you really want to match subdomains.
Restrict the use of the permit_mx_backup SMTP access feature to only domains whose primary MX hosts match the listed networks. The parameter value syntax is the same as with the mynetworks parameter; note, however, that the default value is empty.
The name of the pickup(8) service. This service picks up local mail submissions from the Postfix maildrop queue.
This feature is available in Postfix 2.0 and later.
The numerical Postfix SMTP server response code when a request is rejected by the reject_plaintext_session restriction.
This feature is available in Postfix 2.3 and later.
The postfix(1) commands that the postmulti(1) instance manager treats as "control" commands, that operate on running instances. For these commands, disabled instances are skipped.
This feature is available in Postfix 2.6 and later.
The postfix(1) commands that the postmulti(1) instance manager treats as "start" commands. For these commands, disabled instances are "checked" rather than "started", and failure to "start" a member instance of an instance group will abort the start-up of later instances.
This feature is available in Postfix 2.6 and later.
The postfix(1) commands that the postmulti(1) instance manager treats as "stop" commands. For these commands, disabled instances are skipped, and enabled instances are processed in reverse order.
This feature is available in Postfix 2.6 and later.
Permanent white/blacklist for remote SMTP client IP addresses. postscreen(8) searches this list immediately after a remote SMTP client connects. Specify a comma- or whitespace-separated list of commands (in upper or lower case) or lookup tables. The search stops upon the first command that fires for the client IP address.
Example:
/etc/postfix/main.cf:
postscreen_access_list = permit_mynetworks,
cidr:/etc/postfix/postscreen_access.cidr
/etc/postfix/postscreen_access.cidr:
# Rules are evaluated in the order as specified.
# Blacklist 192.168.* except 192.168.0.1.
192.168.0.1 dunno
192.168.0.0/16 reject
This feature is available in Postfix 2.8.
The action that postscreen(8) takes when an SMTP client sends a bare newline character, that is, a newline not preceded by carriage return. Specify one of the following:
This feature is available in Postfix 2.8.
Enable "bare newline" SMTP protocol tests in the postscreen(8) server. These tests are expensive: a client must disconnect after it passes the test, before it can talk to a real Postfix SMTP server.
This feature is available in Postfix 2.8.
The amount of time that postscreen(8) will use the result from a successful "bare newline" SMTP protocol test. During this time, the client IP address is excluded from this test. The default is long because a client must disconnect after it passes the test, before it can talk to a real Postfix SMTP server.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit). Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
The action that postscreen(8) takes when an SMTP client is permanently blacklisted with the postscreen_access_list parameter. Specify one of the following:
This feature is available in Postfix 2.8.
The amount of time between postscreen(8) cache cleanup runs. Cache cleanup increases the load on the cache database and should therefore not be run frequently. This feature requires that the cache database supports the "delete" and "sequence" operators. Specify a zero interval to disable cache cleanup.
After each cache cleanup run, the postscreen(8) daemon logs the number of entries that were retained and dropped. A cleanup run is logged as "partial" when the daemon terminates early after "postfix reload", "postfix stop", or no requests for $max_idle seconds.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
Persistent storage for the postscreen(8) server decisions.
This feature is available in Postfix 2.8.
The amount of time that postscreen(8) will cache an expired temporary whitelist entry before it is removed. This prevents clients from being logged as "NEW" just because their cache entry expired an hour ago. It also prevents the cache from filling up with clients that passed some deep protocol test once and never came back.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
How many simultaneous connections any client is allowed to have with the postscreen(8) daemon. By default, this limit is the same as with the Postfix SMTP server. Note that the triage process can take several seconds, with the time spent in postscreen_greet_wait delay, and with the time spent talking to the postscreen(8) built-in dummy SMTP protocol engine.
This feature is available in Postfix 2.8.
The limit on the total number of commands per SMTP session for postscreen(8)'s built-in SMTP protocol engine. This SMTP engine defers or rejects all attempts to deliver mail, therefore there is no need to enforce separate limits on the number of junk commands and error commands.
This feature is available in Postfix 2.8.
A mechanism to transform commands from remote SMTP clients. See smtpd_command_filter for further details.
This feature is available in Postfix 2.8 and later.
The time limit to read an entire command line with postscreen(8)'s built-in SMTP protocol engine.
This feature is available in Postfix 2.8.
Disable the SMTP VRFY command in the postscreen(8) daemon. See disable_vrfy_command for details.
This feature is available in Postfix 2.8.
Lookup tables, indexed by the remote SMTP client address, with case insensitive lists of EHLO keywords (pipelining, starttls, auth, etc.) that the postscreen(8) server will not send in the EHLO response to a remote SMTP client. See smtpd_discard_ehlo_keywords for details. The table is not searched by hostname for robustness reasons.
This feature is available in Postfix 2.8 and later.
A case insensitive list of EHLO keywords (pipelining, starttls, auth, etc.) that the postscreen(8) server will not send in the EHLO response to a remote SMTP client. See smtpd_discard_ehlo_keywords for details.
This feature is available in Postfix 2.8 and later.
The action that postscreen(8) takes when an SMTP client's combined DNSBL score is equal to or greater than a threshold (as defined with the postscreen_dnsbl_sites and postscreen_dnsbl_threshold parameters). Specify one of the following:
This feature is available in Postfix 2.8.
A mapping from actual DNSBL domain name which includes a secret password, to the DNSBL domain name that postscreen will reply with when it rejects mail. When no mapping is found, the actual DNSBL domain will be used.
For maximal stability it is best to use a file that is read into memory such as pcre:, regexp: or texthash: (texthash: is similar to hash:, except a) there is no need to run postmap(1) before the file can be used, and b) texthash: does not detect changes after the file is read).
Example:
/etc/postfix/main.cf:
postscreen_dnsbl_reply_map = texthash:/etc/postfix/dnsbl_reply
/etc/postfix/dnsbl_reply: secret.zen.spamhaus.org zen.spamhaus.org
This feature is available in Postfix 2.8.
Optional list of DNS white/blacklist domains, filters and weight factors. When the list is non-empty, the dnsblog(8) daemon will query these domains with the IP addresses of remote SMTP clients, and postscreen(8) will update an SMTP client's DNSBL score with each non-error reply.
Caution: when postscreen rejects mail, it replies with the DNSBL domain name. Use the postscreen_dnsbl_reply_map feature to hide "password" information in DNSBL domain names.
When a client's score is equal to or greater than the threshold specified with postscreen_dnsbl_threshold, postscreen(8) can drop the connection with the SMTP client.
Specify a list of domain=filter*weight entries, separated by comma or whitespace.
When no "=filter" is specified, postscreen(8) will use any non-error DNSBL reply. Otherwise, postscreen(8) uses only DNSBL replies that match the filter. The filter has the form d.d.d.d, where each d is a number, or a pattern inside [] that contains one or more ";"-separated numbers or number..number ranges.
When no "*weight" is specified, postscreen(8) increments the SMTP client's DNSBL score by 1. Otherwise, the weight must be an integral number, and postscreen(8) adds the specified weight to the SMTP client's DNSBL score. Specify a negative number for whitelisting.
When one postscreen_dnsbl_sites entry produces multiple DNSBL responses, postscreen(8) applies the weight at most once.
Examples:
To use example.com as a high-confidence blocklist, and to block mail with example.net and example.org only when both agree:
postscreen_dnsbl_threshold = 2 postscreen_dnsbl_sites = example.com*2, example.net, example.org
To filter only DNSBL replies containing 127.0.0.4:
postscreen_dnsbl_sites = example.com=127.0.0.4
This feature is available in Postfix 2.8.
The inclusive lower bound for blocking an SMTP client, based on its combined DNSBL score as defined with the postscreen_dnsbl_sites parameter.
This feature is available in Postfix 2.8.
The amount of time that postscreen(8) will use the result from a successful DNS blocklist test. During this time, the client IP address is excluded from this test. The default is relatively short, because a good client can immediately talk to a real Postfix SMTP server.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit). Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
Mandatory TLS: announce STARTTLS support to SMTP clients, and require that clients use TLS encryption. See smtpd_postscreen_enforce_tls for details.
This feature is available in Postfix 2.8 and later. Preferably, use postscreen_tls_security_level instead.
List of characters that are permitted in postscreen_reject_footer attribute expansions. See smtpd_expansion_filter for further details.
This feature is available in Postfix 2.8 and later.
List of commands that the postscreen(8) server considers in violation of the SMTP protocol. See smtpd_forbidden_commands for syntax, and postscreen_non_smtp_command_action for possible actions.
This feature is available in Postfix 2.8.
The action that postscreen(8) takes when an SMTP client speaks before its turn within the time specified with the postscreen_greet_wait parameter. Specify one of the following:
In either case, postscreen(8) will not whitelist the SMTP client IP address.
This feature is available in Postfix 2.8.
The text in the optional "220-text..." server response that postscreen(8) sends ahead of the real Postfix SMTP server's "220 text..." response, in an attempt to confuse bad SMTP clients so that they speak before their turn (pre-greet). Specify an empty value to disable this feature.
This feature is available in Postfix 2.8.
The amount of time that postscreen(8) will use the result from a successful PREGREET test. During this time, the client IP address is excluded from this test. The default is relatively short, because a good client can immediately talk to a real Postfix SMTP server.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit). Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
The amount of time that postscreen(8) will wait for an SMTP client to send a command before its turn, and for DNS blocklist lookup results to arrive (default: up to 2 seconds under stress, up to 6 seconds otherwise).
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit).
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
Require that a remote SMTP client sends HELO or EHLO before commencing a MAIL transaction.
This feature is available in Postfix 2.8.
The action that postscreen(8) takes when an SMTP client sends non-SMTP commands as specified with the postscreen_forbidden_commands parameter. Specify one of the following:
This feature is available in Postfix 2.8.
Enable "non-SMTP command" tests in the postscreen(8) server. These tests are expensive: a client must disconnect after it passes the test, before it can talk to a real Postfix SMTP server.
This feature is available in Postfix 2.8.
The amount of time that postscreen(8) will use the result from a successful "non_smtp_command" SMTP protocol test. During this time, the client IP address is excluded from this test. The default is long because a client must disconnect after it passes the test, before it can talk to a real Postfix SMTP server.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit). Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
The action that postscreen(8) takes when an SMTP client sends multiple commands instead of sending one command and waiting for the server to respond. Specify one of the following:
This feature is available in Postfix 2.8.
Enable "pipelining" SMTP protocol tests in the postscreen(8) server. These tests are expensive: a good client must disconnect after it passes the test, before it can talk to a real Postfix SMTP server.
This feature is available in Postfix 2.8.
The amount of time that postscreen(8) will use the result from a successful "pipelining" SMTP protocol test. During this time, the client IP address is excluded from this test. The default is long because a good client must disconnect after it passes the test, before it can talk to a real Postfix SMTP server.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit). Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
The number of clients that can be waiting for service from a real SMTP server process. When this queue is full, all clients will receive a 421 reponse.
This feature is available in Postfix 2.8.
The number of non-whitelisted clients that can be waiting for a decision whether they will receive service from a real SMTP server process. When this queue is full, all non-whitelisted clients will receive a 421 reponse.
This feature is available in Postfix 2.8.
Optional information that is appended after a 4XX or 5XX server response. See smtpd_reject_footer for further details.
This feature is available in Postfix 2.8 and later.
The SMTP TLS security level for the postscreen(8) server; when a non-empty value is specified, this overrides the obsolete parameters postscreen_use_tls and postscreen_enforce_tls. See smtpd_tls_security_level for details.
This feature is available in Postfix 2.8 and later.
Opportunistic TLS: announce STARTTLS support to SMTP clients, but do not require that clients use TLS encryption.
This feature is available in Postfix 2.8 and later. Preferably, use postscreen_tls_security_level instead.
How much time a postscreen(8) process may take to respond to an SMTP client command or to perform a cache operation before it is terminated by a built-in watchdog timer. This is a safety mechanism that prevents postscreen(8) from becoming non-responsive due to a bug in Postfix itself or in system software. To avoid false alarms and unnecessary cache corruption this limit cannot be set under 10s.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit). Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
A list of local postscreen(8) server IP addresses where a non-whitelisted SMTP client can obtain postscreen(8)'s temporary whitelist status to talk to a Postfix SMTP server process. By default, a client can pass postscreen(8)'s whitelist tests on any local postscreen(8) server IP address.
When postscreen(8) listens on both primary and backup MX addresses, the postscreen_whitelist_interfaces parameter can be used to disable whitelisting on backup MX addresses. With this configuration, postscreen(8) denies whitelisting status to clients that connect only to backup MX addresses, and prevents them from talking to a Postfix SMTP server process.
Example:
/etc/postfix/main.cf:
# Don't whitelist connections to the backup IP address.
postscreen_whitelist_interfaces = !168.100.189.8, static:all
This feature is available in Postfix 2.9 and later.
The message delivery contexts where the Postfix local(8) delivery agent prepends a Delivered-To: message header with the address that the mail was delivered to. This information is used for mail delivery loop detection.
By default, the Postfix local delivery agent prepends a Delivered-To: header when forwarding mail and when delivering to file (mailbox) and command. Turning off the Delivered-To: header when forwarding mail is not recommended.
Specify zero or more of forward, file, or command.
Example:
prepend_delivered_header = forward
The process ID of a Postfix command or daemon process.
The location of Postfix PID files relative to $queue_directory. This is a read-only parameter.
The process name of a Postfix command or daemon process.
What address lookup tables copy an address extension from the lookup key to the lookup result.
For example, with a virtual(5) mapping of "[email protected] => [email protected]", the address "[email protected]" would rewrite to "[email protected]".
Specify zero or more of canonical, virtual, alias, forward, include or generic. These cause address extension propagation with canonical(5), virtual(5), and aliases(5) maps, with local(8) .forward and :include: file lookups, and with smtp(8) generic maps, respectively.
Note: enabling this feature for types other than canonical and virtual is likely to cause problems when mail is forwarded to other sites, especially with mail that is sent to a mailing list exploder address.
Examples:
propagate_unmatched_extensions = canonical, virtual, alias,
forward, include
propagate_unmatched_extensions = canonical, virtual
The network interface addresses that this mail system receives mail on by way of a proxy or network address translation unit.
This feature is available in Postfix 2.0 and later.
You must specify your "outside" proxy/NAT addresses when your system is a backup MX host for other domains, otherwise mail delivery loops will happen when the primary MX host is down.
Example:
proxy_interfaces = 1.2.3.4
The lookup tables that the proxymap(8) server is allowed to access for the read-only service. Table references that don't begin with proxy: are ignored.
This feature is available in Postfix 2.0 and later.
The lookup tables that the proxymap(8) server is allowed to access for the read-write service. Postfix-owned local database files should be stored under the Postfix-owned data_directory. Table references that don't begin with proxy: are ignored.
This feature is available in Postfix 2.5 and later.
The name of the proxymap read-only table lookup service. This service is normally implemented by the proxymap(8) daemon.
This feature is available in Postfix 2.6 and later.
The name of the proxywrite read-write table lookup service. This service is normally implemented by the proxymap(8) daemon.
This feature is available in Postfix 2.6 and later.
The minimal delay between warnings that a specific destination is clogging up the Postfix active queue. Specify 0 to disable.
This feature is enabled with the helpful_warnings parameter.
This feature is available in Postfix 2.0 and later.
How much time a Postfix queue manager process may take to handle a request before it is terminated by a built-in watchdog timer.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
Obsolete feature: the percentage of delivery resources that a busy mail system will use up for delivery of a large mailing list message.
This feature exists only in the oqmgr(8) old queue manager. The current queue manager solves the problem in a better way.
The time limit for the queue manager to send or receive information over an internal communication channel. The purpose is to break out of deadlock situations. If the time limit is exceeded the software either retries or aborts the operation.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The maximal number of messages in the active queue.
The maximal number of recipients held in memory by the Postfix queue manager, and the maximal size of the size of the short-term, in-memory "dead" destination status cache.
The minimal number of in-memory recipients for any message. This takes priority over any other in-memory recipient limits (i.e., the global qmgr_message_recipient_limit and the per transport _recipient_limit) if necessary. The minimum value allowed for this parameter is 1.
What clients are allowed to connect to the QMQP server port.
By default, no client is allowed to use the service. This is because the QMQP server will relay mail to any destination.
Specify a list of client patterns. A list pattern specifies a host name, a domain name, an internet address, or a network/mask pattern, where the mask specifies the number of bits in the network part. When a pattern specifies a file name, its contents are substituted for the file name; when a pattern is a "type:table" table specification, table lookup is used instead.
Patterns are separated by whitespace and/or commas. In order to reverse the result, precede a pattern with an exclamation point (!). The form "!/file/name" is supported only in Postfix version 2.4 and later.
Example:
qmqpd_authorized_clients = !192.168.0.1, 192.168.0.0/24
Enable logging of the remote QMQP client port in addition to the hostname and IP address. The logging format is "host[address]:port".
This feature is available in Postfix 2.5 and later.
How long the QMQP server will pause before sending a negative reply to the client. The purpose is to slow down confused or malicious clients.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The time limit for sending or receiving information over the network. If a read or write operation blocks for more than $qmqpd_timeout seconds the QMQP server gives up and disconnects.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The location of the Postfix top-level queue directory. This is the root directory of Postfix daemon processes that run chrooted.
The maximal number of (name=value) attributes that may be stored in a Postfix queue file. The limit is enforced by the cleanup(8) server.
This feature is available in Postfix 2.0 and later.
The minimal amount of free space in bytes in the queue file system that is needed to receive mail. This is currently used by the SMTP server to decide if it will accept any mail at all.
By default, the Postfix SMTP server rejects MAIL FROM commands when the amount of free space is less than 1.5*$message_size_limit (Postfix version 2.1 and later). To specify a higher minimum free space limit, specify a queue_minfree value that is at least 1.5*$message_size_limit.
With Postfix versions 2.0 and earlier, a queue_minfree value of zero means there is no minimum required amount of free space.
The time between deferred queue scans by the queue manager; prior to Postfix 2.4 the default value was 1000s.
This parameter should be set less than or equal to $minimal_backoff_time. See also $maximal_backoff_time.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The name of the qmgr(8) service. This service manages the Postfix queue and schedules delivery requests.
This feature is available in Postfix 2.0 and later.
Optional lookup tables with RBL response templates. The tables are indexed by the RBL domain name. By default, Postfix uses the default template as specified with the default_rbl_reply configuration parameter. See there for a discussion of the syntax of RBL reply templates.
This feature is available in Postfix 2.0 and later.
The location of Postfix README files that describe how to build, configure or operate a specific Postfix subsystem or feature.
Enable or disable recipient validation, built-in content filtering, or address mapping. Typically, these are specified in master.cf as command-line arguments for the smtpd(8), qmqpd(8) or pickup(8) daemons.
Specify zero or more of the following options. The options override main.cf settings and are either implemented by smtpd(8), qmqpd(8), or pickup(8) themselves, or they are forwarded to the cleanup server.
Note: when the "BEFORE content filter" receive_override_options setting is specified in the main.cf file, specify the "AFTER content filter" receive_override_options setting in master.cf (and vice versa).
Examples:
receive_override_options =
no_unknown_recipient_checks, no_header_body_checks
receive_override_options = no_address_mappings
This feature is available in Postfix 2.1 and later.
Optional BCC (blind carbon-copy) address lookup tables, indexed by recipient address. The BCC address (multiple results are not supported) is added when mail enters from outside of Postfix.
This feature is available in Postfix 2.1 and later.
The table search order is as follows:
Specify the types and names of databases to use. After change, run "postmap /etc/postfix/recipient_bcc".
Note: if mail to the BCC address bounces it will be returned to the sender.
Note: automatic BCC recipients are produced only for new mail. To avoid mailer loops, automatic BCC recipients are not generated after Postfix forwards mail internally, or after Postfix generates mail itself.
Example:
recipient_bcc_maps = hash:/etc/postfix/recipient_bcc
What addresses are subject to recipient_canonical_maps address mapping. By default, recipient_canonical_maps address mapping is applied to envelope recipient addresses, and to header recipient addresses.
Specify one or more of: envelope_recipient, header_recipient
This feature is available in Postfix 2.2 and later.
Optional address mapping lookup tables for envelope and header recipient addresses. The table format and lookups are documented in canonical(5).
Note: $recipient_canonical_maps is processed before $canonical_maps.
Example:
recipient_canonical_maps = hash:/etc/postfix/recipient_canonical
The separator between user names and address extensions (user+foo). See canonical(5), local(8), relocated(5) and virtual(5) for the effects this has on aliases, canonical, virtual, relocated and on .forward file lookups. Basically, the software tries user+foo and .forward+foo before trying user and .forward.
Example:
recipient_delimiter = +
The numerical Postfix SMTP server response code when a remote SMTP client request is rejected by the "reject" restriction.
Do not change this unless you have a complete understanding of RFC 2821.
The Postfix SMTP server's action when a reject-type restriction fails due to a temporary error condition. Specify "defer" to defer the remote SMTP client request immediately. With the default "defer_if_permit" action, the Postfix SMTP server continues to look for opportunities to reject mail, and defers the client request only if it would otherwise be accepted.
For finer control, see: unverified_recipient_tempfail_action, unverified_sender_tempfail_action, unknown_address_tempfail_action, and unknown_helo_hostname_tempfail_action.
This feature is available in Postfix 2.6 and later.
List of tables with remote SMTP client-certificate fingerprints for which the Postfix SMTP server will allow access with the permit_tls_clientcerts feature. The fingerprint digest algorithm is configurable via the smtpd_tls_fingerprint_digest parameter (hard-coded as md5 prior to Postfix version 2.5).
Postfix lookup tables are in the form of (key, value) pairs. Since we only need the key, the value can be chosen freely, e.g. the name of the user or host: D7:04:2F:A7:0B:8C:A5:21:FA:31:77:E1:41:8A:EE:80 lutzpc.at.home
Example:
relay_clientcerts = hash:/etc/postfix/relay_clientcerts
For more fine-grained control, use check_ccert_access to select an appropriate access(5) policy for each client. See RESTRICTION_CLASS_README.
This feature is available with Postfix version 2.2.
The maximal number of parallel deliveries to the same destination via the relay message delivery transport. This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
This feature is available in Postfix 2.0 and later.
The maximal number of recipients per message for the relay message delivery transport. This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
Setting this parameter to a value of 1 changes the meaning of relay_destination_concurrency_limit from concurrency per domain into concurrency per recipient.
This feature is available in Postfix 2.0 and later.
What destination domains (and subdomains thereof) this system will relay mail to. Subdomain matching is controlled with the parent_domain_matches_subdomains parameter. For details about how the relay_domains value is used, see the description of the permit_auth_destination and reject_unauth_destination SMTP recipient restrictions.
Domains that match $relay_domains are delivered with the $relay_transport mail delivery transport. The SMTP server validates recipient addresses with $relay_recipient_maps and rejects non-existent recipients. See also the relay domains address class in the ADDRESS_CLASS_README file.
Note: Postfix will not automatically forward mail for domains that list this system as their primary or backup MX host. See the permit_mx_backup restriction in the postconf(5) manual page.
Specify a list of host or domain names, "/file/name" patterns or "type:table" lookup tables, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a (parent) domain appears as lookup key. Specify "!pattern" to exclude a domain from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
The numerical Postfix SMTP server response code when a client request is rejected by the reject_unauth_destination recipient restriction.
Do not change this unless you have a complete understanding of RFC 2821.
Optional lookup tables with all valid addresses in the domains that match $relay_domains. Specify @domain as a wild-card for domains that have no valid recipient list, and become a source of backscatter mail: Postfix accepts spam for non-existent recipients and then floods innocent people with undeliverable mail. Technically, tables listed with $relay_recipient_maps are used as lists: Postfix needs to know only if a lookup string is found or not, but it does not use the result from table lookup.
If this parameter is non-empty, then the Postfix SMTP server will reject mail to unknown relay users. This feature is off by default.
See also the relay domains address class in the ADDRESS_CLASS_README file.
Example:
relay_recipient_maps = hash:/etc/postfix/relay_recipients
This feature is available in Postfix 2.0 and later.
The default mail delivery transport and next-hop destination for remote delivery to domains listed with $relay_domains. In order of decreasing precedence, the nexthop destination is taken from $relay_transport, $sender_dependent_relayhost_maps, $relayhost, or from the recipient domain. This information can be overruled with the transport(5) table.
Specify a string of the form transport:nexthop, where transport is the name of a mail delivery transport defined in master.cf. The :nexthop destination is optional; its syntax is documented in the manual page of the corresponding delivery agent.
See also the relay domains address class in the ADDRESS_CLASS_README file.
This feature is available in Postfix 2.0 and later.
The next-hop destination of non-local mail; overrides non-local domains in recipient addresses. This information is overruled with relay_transport, sender_dependent_default_transport_maps, default_transport, sender_dependent_relayhost_maps and with the transport(5) table.
On an intranet, specify the organizational domain name. If your internal DNS uses no MX records, specify the name of the intranet gateway host instead.
In the case of SMTP, specify a domain name, hostname, hostname:port, [hostname]:port, [hostaddress] or [hostaddress]:port. The form [hostname] turns off MX lookups.
If you're connected via UUCP, see the UUCP_README file for useful information.
Examples:
relayhost = $mydomain relayhost = [gateway.example.com] relayhost = uucphost relayhost = [an.ip.add.ress]
Optional lookup tables with new contact information for users or domains that no longer exist. The table format and lookups are documented in relocated(5).
If you use this feature, run "postmap /etc/postfix/relocated" to build the necessary DBM or DB file after change, then "postfix reload" to make the changes visible.
Examples:
relocated_maps = dbm:/etc/postfix/relocated relocated_maps = hash:/etc/postfix/relocated
Don't rewrite message headers from remote clients at all when this parameter is empty; otherwise, rewrite message headers and append the specified domain name to incomplete addresses. The local_header_rewrite_clients parameter controls what clients Postfix considers local.
Examples:
The safe setting: append "domain.invalid" to incomplete header addresses from remote SMTP clients, so that those addresses cannot be confused with local addresses.
remote_header_rewrite_domain = domain.invalid
The default, purist, setting: don't rewrite headers from remote clients at all.
remote_header_rewrite_domain =
Require that a local(8) recipient's home directory exists before mail delivery is attempted. By default this test is disabled. It can be useful for environments that import home directories to the mail server (IMPORTING HOME DIRECTORIES IS NOT RECOMMENDED).
Reset the local(8) delivery agent's idea of the owner-alias attribute, when delivering mail to a child alias that does not have its own owner alias.
This feature is available in Postfix 2.8 and later. With older Postfix releases, the behavior is as if this parameter is set to "yes".
As documented in aliases(5), when an alias name has a companion alias named owner-name, delivery errors will be reported to the owner alias instead of the sender. This configuration is recommended for mailing lists.
A less known property of the owner alias is that it also forces the local(8) delivery agent to write local and remote addresses from alias expansion to a new queue file, instead of attempting to deliver mail to local addresses as soon as they come out of alias expansion.
Writing local addresses from alias expansion to a new queue file allows for robust handling of temporary delivery errors: errors with one local member have no effect on deliveries to other members of the list. On the other hand, delivery to local addresses as soon as they come out of alias expansion is fragile: a temporary error with one local address from alias expansion will cause the entire alias to be expanded repeatedly until the error goes away, or until the message expires in the queue. In that case, a problem with one list member results in multiple message deliveries to other list members.
The default behavior of Postfix 2.8 and later is to keep the owner-alias attribute of the parent alias, when delivering mail to a child alias that does not have its own owner alias. Then, local addresses from that child alias will be written to a new queue file, and a temporary error with one local address will not affect delivery to other mailing list members.
Unfortunately, older Postfix releases reset the owner-alias attribute when delivering mail to a child alias that does not have its own owner alias. The local(8) delivery agent then attempts to deliver local addresses as soon as they come out of child alias expansion. If delivery to any address from child alias expansion fails with a temporary error condition, the entire mailing list may be expanded repeatedly until the mail expires in the queue, resulting in multiple deliveries of the same message to mailing list members.
Resolve a recipient address safely instead of correctly, by looking inside quotes.
By default, the Postfix address resolver does not quote the address localpart as per RFC 822, so that additional @ or % or ! operators remain visible. This behavior is safe but it is also technically incorrect.
If you specify "resolve_dequoted_address = no", then the Postfix resolver will not know about additional @ etc. operators in the address localpart. This opens opportunities for obscure mail relay attacks with user@domain@domain addresses when Postfix provides backup MX service for Sendmail systems.
Resolve an address that ends in the "@" null domain as if the local hostname were specified, instead of rejecting the address as invalid.
This feature is available in Postfix 2.1 and later. Earlier versions always resolve the null domain as the local hostname.
The Postfix SMTP server uses this feature to reject mail from or to addresses that end in the "@" null domain, and from addresses that rewrite into a form that ends in the "@" null domain.
Resolve "user@ipaddress" as "user@[ipaddress]", instead of rejecting the address as invalid.
This feature is available in Postfix 2.3 and later.
The name of the address rewriting service. This service rewrites addresses to standard form and resolves them to a (delivery method, next-hop host, recipient) triple.
This feature is available in Postfix 2.0 and later.
The name of the directory with example Postfix configuration files. Starting with Postfix 2.1, these files have been replaced with the postconf(5) manual page.
When authenticating to a remote SMTP or LMTP server with the default setting "no", send no SASL authoriZation ID (authzid); send only the SASL authentiCation ID (authcid) plus the authcid's password.
The non-default setting "yes" enables the behavior of older Postfix versions. These always send a SASL authzid that is equal to the SASL authcid, but this causes inter-operability problems with some SMTP servers.
This feature is available in Postfix 2.4.4 and later.
This parameter should not be used. It was replaced by sender_dependent_relayhost_maps in Postfix version 2.3.
Optional BCC (blind carbon-copy) address lookup tables, indexed by sender address. The BCC address (multiple results are not supported) is added when mail enters from outside of Postfix.
This feature is available in Postfix 2.1 and later.
The table search order is as follows:
Specify the types and names of databases to use. After change, run "postmap /etc/postfix/sender_bcc".
Note: if mail to the BCC address bounces it will be returned to the sender.
Note: automatic BCC recipients are produced only for new mail. To avoid mailer loops, automatic BCC recipients are not generated after Postfix forwards mail internally, or after Postfix generates mail itself.
Example:
sender_bcc_maps = hash:/etc/postfix/sender_bcc
What addresses are subject to sender_canonical_maps address mapping. By default, sender_canonical_maps address mapping is applied to envelope sender addresses, and to header sender addresses.
Specify one or more of: envelope_sender, header_sender
This feature is available in Postfix 2.2 and later.
Optional address mapping lookup tables for envelope and header sender addresses. The table format and lookups are documented in canonical(5).
Example: you want to rewrite the SENDER address "[email protected]" to "[email protected]", while still being able to send mail to the RECIPIENT address "[email protected]".
Note: $sender_canonical_maps is processed before $canonical_maps.
Example:
sender_canonical_maps = hash:/etc/postfix/sender_canonical
A sender-dependent override for the global default_transport parameter setting. The tables are searched by the envelope sender address and @domain. A lookup result of DUNNO terminates the search without overriding the global default_transport parameter setting. This information is overruled with the transport(5) table.
Note: this overrides default_transport, not transport_maps, and therefore the expected syntax is that of default_transport, not the syntax of transport_maps. Specifically, this does not support the transport_maps syntax for null transport, null nexthop, or null email addresses.
For safety reasons, this feature does not allow $number substitutions in regular expression maps.
This feature is available in Postfix 2.7 and later.
A sender-dependent override for the global relayhost parameter setting. The tables are searched by the envelope sender address and @domain. A lookup result of DUNNO terminates the search without overriding the global relayhost parameter setting (Postfix 2.6 and later). This information is overruled with relay_transport, sender_dependent_default_transport_maps, default_transport and with the transport(5) table.
For safety reasons, this feature does not allow $number substitutions in regular expression maps.
This feature is available in Postfix 2.3 and later.
A Sendmail compatibility feature that specifies the location of the Postfix sendmail(1) command. This command can be used to submit mail into the Postfix queue.
How long the Postfix master(8) waits before forking a server that appears to be malfunctioning.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The group ownership of set-gid Postfix commands and of group-writable Postfix directories. When this parameter value is changed you need to re-run "postfix set-permissions" (with Postfix version 2.0 and earlier: "/etc/postfix/post-install set-permissions".
Display the name of the recipient table in the "User unknown" responses. The extra detail makes trouble shooting easier but also reveals information that is nobody elses business.
This feature is available in Postfix 2.0 and later.
The name of the showq(8) service. This service produces mail queue status reports.
This feature is available in Postfix 2.0 and later.
The address type ("ipv6", "ipv4" or "any") that the Postfix SMTP client will try first, when a destination has IPv6 and IPv4 addresses with equal MX preference. This feature has no effect unless the inet_protocols setting enables both IPv4 and IPv6.
This feature is available in Postfix 2.8 and later.
Always send EHLO at the start of an SMTP session.
With "smtp_always_send_ehlo = no", Postfix sends EHLO only when the word "ESMTP" appears in the server greeting banner (example: 220 spike.porcupine.org ESMTP Postfix).
An optional numerical network address that the Postfix SMTP client should bind to when making an IPv4 connection.
This can be specified in the main.cf file for all SMTP clients, or it can be specified in the master.cf file for a specific client, for example:
/etc/postfix/master.cf:
smtp ... smtp -o smtp_bind_address=11.22.33.44
Note 1: when inet_interfaces specifies no more than one IPv4 address, and that address is a non-loopback address, it is automatically used as the smtp_bind_address. This supports virtual IP hosting, but can be a problem on multi-homed firewalls. See the inet_interfaces documentation for more detail.
Note 2: address information may be enclosed inside [], but this form is not required here.
An optional numerical network address that the Postfix SMTP client should bind to when making an IPv6 connection.
This feature is available in Postfix 2.2 and later.
This can be specified in the main.cf file for all SMTP clients, or it can be specified in the master.cf file for a specific client, for example:
/etc/postfix/master.cf:
smtp ... smtp -o smtp_bind_address6=1:2:3:4:5:6:7:8
Note 1: when inet_interfaces specifies no more than one IPv6 address, and that address is a non-loopback address, it is automatically used as the smtp_bind_address6. This supports virtual IP hosting, but can be a problem on multi-homed firewalls. See the inet_interfaces documentation for more detail.
Note 2: address information may be enclosed inside [], but this form is not recommended here.
Restricted body_checks(5) tables for the Postfix SMTP client. These tables are searched while mail is being delivered. Actions that change the delivery time or destination are not available.
This feature is available in Postfix 2.5 and later.
Allow DNS CNAME records to override the servername that the Postfix SMTP client uses for logging, SASL password lookup, TLS policy decisions, or TLS certificate verification. The value "no" hardens Postfix smtp_tls_per_site hostname-based policies against false hostname information in DNS CNAME records, and makes SASL password file lookups more predictable. This is the default setting as of Postfix 2.3.
This feature is available in Postfix 2.2.9 and later.
The SMTP client time limit for completing a TCP connection, or zero (use the operating system built-in time limit).
When no connection can be made within the deadline, the Postfix SMTP client tries the next address on the mail exchanger list. Specify 0 to disable the time limit (i.e. use whatever timeout is implemented by the operating system).
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
Permanently enable SMTP connection caching for the specified destinations. With SMTP connection caching, a connection is not closed immediately after completion of a mail transaction. Instead, the connection is kept open for up to $smtp_connection_cache_time_limit seconds. This allows connections to be reused for other deliveries, and can improve mail delivery performance.
Specify a comma or white space separated list of destinations or pseudo-destinations:
This feature is available in Postfix 2.2 and later.
Temporarily enable SMTP connection caching while a destination has a high volume of mail in the active queue. With SMTP connection caching, a connection is not closed immediately after completion of a mail transaction. Instead, the connection is kept open for up to $smtp_connection_cache_time_limit seconds. This allows connections to be reused for other deliveries, and can improve mail delivery performance.
This feature is available in Postfix 2.2 and later.
When SMTP connection caching is enabled, the number of times that an SMTP session may be reused before it is closed.
This feature is available in Postfix 2.2. In Postfix 2.3 it is replaced by $smtp_connection_reuse_time_limit.
When SMTP connection caching is enabled, the amount of time that an unused SMTP client socket is kept open before it is closed. Do not specify larger values without permission from the remote sites.
This feature is available in Postfix 2.2 and later.
The amount of time during which Postfix will use an SMTP connection repeatedly. The timer starts when the connection is initiated (i.e. it includes the connect, greeting and helo latency, in addition to the latencies of subsequent mail delivery transactions).
This feature addresses a performance stability problem with remote SMTP servers. This problem is not specific to Postfix: it can happen when any MTA sends large amounts of SMTP email to a site that has multiple MX hosts.
The problem starts when one of a set of MX hosts becomes slower than the rest. Even though SMTP clients connect to fast and slow MX hosts with equal probability, the slow MX host ends up with more simultaneous inbound connections than the faster MX hosts, because the slow MX host needs more time to serve each client request.
The slow MX host becomes a connection attractor. If one MX host becomes N times slower than the rest, it dominates mail delivery latency unless there are more than N fast MX hosts to counter the effect. And if the number of MX hosts is smaller than N, the mail delivery latency becomes effectively that of the slowest MX host divided by the total number of MX hosts.
The solution uses connection caching in a way that differs from Postfix version 2.2. By limiting the amount of time during which a connection can be used repeatedly (instead of limiting the number of deliveries over that connection), Postfix not only restores fairness in the distribution of simultaneous connections across a set of MX hosts, it also favors deliveries over connections that perform well, which is exactly what we want.
The default reuse time limit, 300s, is comparable to the various smtp transaction timeouts which are fair estimates of maximum excess latency for a slow delivery. Note that hosts may accept thousands of messages over a single connection within the default connection reuse time limit. This number is much larger than the default Postfix version 2.2 limit of 10 messages per cached connection. It may prove necessary to lower the limit to avoid interoperability issues with MTAs that exhibit bugs when many messages are delivered via a single connection. A lower reuse time limit risks losing the benefit of connection reuse when the average connection and mail delivery latency exceeds the reuse time limit.
This feature is available in Postfix 2.3 and later.
The SMTP client time limit for sending the SMTP ".", and for receiving the server response.
When no response is received within the deadline, a warning is logged that the mail may be delivered multiple times.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The SMTP client time limit for sending the SMTP DATA command, and for receiving the server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
The SMTP client time limit for sending the SMTP message content. When the connection makes no progress for more than $smtp_data_xfer_timeout seconds the Postfix SMTP client terminates the transfer.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
Defer mail delivery when no MX record resolves to an IP address.
The default (no) is to return the mail as undeliverable. With older Postfix versions the default was to keep trying to deliver the mail until someone fixed the MX record or until the mail was too old.
Note: Postfix always ignores MX records with equal or worse preference than the local MTA itself.
This feature is available in Postfix 2.1 and later.
The maximal number of parallel deliveries to the same destination via the smtp message delivery transport. This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
The maximal number of recipients per message for the smtp message delivery transport. This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
Setting this parameter to a value of 1 changes the meaning of smtp_destination_concurrency_limit from concurrency per domain into concurrency per recipient.
Lookup tables, indexed by the remote SMTP server address, with case insensitive lists of EHLO keywords (pipelining, starttls, auth, etc.) that the Postfix SMTP client will ignore in the EHLO response from a remote SMTP server. See smtp_discard_ehlo_keywords for details. The table is not indexed by hostname for consistency with smtpd_discard_ehlo_keyword_address_maps.
This feature is available in Postfix 2.2 and later.
A case insensitive list of EHLO keywords (pipelining, starttls, auth, etc.) that the Postfix SMTP client will ignore in the EHLO response from a remote SMTP server.
This feature is available in Postfix 2.2 and later.
Notes:
Specify the silent-discard pseudo keyword to prevent this action from being logged.
Use the smtp_discard_ehlo_keyword_address_maps feature to discard EHLO keywords selectively.
DNS Resolver options for the Postfix SMTP client. Specify zero or more of the following options, separated by comma or whitespace. Option names are case-sensitive. Some options refer to domain names that are specified in the file /etc/resolv.conf or equivalent.
This feature is available in Postfix 2.8 and later.
Enforcement mode: require that remote SMTP servers use TLS encryption, and never send mail in the clear. This also requires that the remote SMTP server hostname matches the information in the remote server certificate, and that the remote SMTP server certificate was issued by a CA that is trusted by the Postfix SMTP client. If the certificate doesn't verify or the hostname doesn't match, delivery is deferred and mail stays in the queue.
The server hostname is matched against all names provided as dNSNames in the SubjectAlternativeName. If no dNSNames are specified, the CommonName is checked. The behavior may be changed with the smtp_tls_enforce_peername option.
This option is useful only if you are definitely sure that you will only connect to servers that support RFC 2487 _and_ that provide valid server certificates. Typical use is for clients that send all their email to a dedicated mailhub.
This feature is available in Postfix 2.2 and later. With Postfix 2.3 and later use smtp_tls_security_level instead.
Optional list of relay hosts for SMTP destinations that can't be found or that are unreachable. With Postfix 2.2 and earlier this parameter is called fallback_relay.
By default, mail is returned to the sender when a destination is not found, and delivery is deferred when a destination is unreachable.
The fallback relays must be SMTP destinations. Specify a domain, host, host:port, [host]:port, [address] or [address]:port; the form [host] turns off MX lookups. If you specify multiple SMTP destinations, Postfix will try them in the specified order.
To prevent mailer loops between MX hosts and fall-back hosts, Postfix version 2.2 and later will not use the fallback relays for destinations that it is MX host for (assuming DNS lookup is turned on).
Optional lookup tables that perform address rewriting in the SMTP client, typically to transform a locally valid address into a globally valid address when sending mail across the Internet. This is needed when the local machine does not have its own Internet domain name, but uses something like localdomain.local instead.
The table format and lookups are documented in generic(5); examples are shown in the ADDRESS_REWRITING_README and STANDARD_CONFIGURATION_README documents.
This feature is available in Postfix 2.2 and later.
Restricted header_checks(5) tables for the Postfix SMTP client. These tables are searched while mail is being delivered. Actions that change the delivery time or destination are not available.
This feature is available in Postfix 2.5 and later.
The hostname to send in the SMTP EHLO or HELO command.
The default value is the machine hostname. Specify a hostname or [ip.add.re.ss].
This information can be specified in the main.cf file for all SMTP clients, or it can be specified in the master.cf file for a specific client, for example:
/etc/postfix/master.cf:
mysmtp ... smtp -o smtp_helo_name=foo.bar.com
This feature is available in Postfix 2.0 and later.
The SMTP client time limit for sending the HELO or EHLO command, and for receiving the initial server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
What mechanisms the Postfix SMTP client uses to look up a host's IP address. This parameter is ignored when DNS lookups are disabled (see: disable_dns_lookups).
Specify one of the following:
This feature is available in Postfix 2.1 and later.
The maximal length of message header and body lines that Postfix will send via SMTP. Longer lines are broken by inserting "<CR><LF><SPACE>". This minimizes the damage to MIME formatted mail.
By default, the line length is limited to 990 characters, because some server implementations cannot receive mail with long lines.
The SMTP client time limit for sending the MAIL FROM command, and for receiving the server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
Restricted mime_header_checks(5) tables for the Postfix SMTP client. These tables are searched while mail is being delivered. Actions that change the delivery time or destination are not available.
This feature is available in Postfix 2.5 and later.
The maximal number of MX (mail exchanger) IP addresses that can result from mail exchanger lookups, or zero (no limit). Prior to Postfix version 2.3, this limit was disabled by default.
This feature is available in Postfix 2.1 and later.
The maximal number of SMTP sessions per delivery request before giving up or delivering to a fall-back relay host, or zero (no limit). This restriction ignores sessions that fail to complete the SMTP initial handshake (Postfix version 2.2 and earlier) or that fail to complete the EHLO and TLS handshake (Postfix version 2.3 and later).
This feature is available in Postfix 2.1 and later.
Restricted nested_header_checks(5) tables for the Postfix SMTP client. These tables are searched while mail is being delivered. Actions that change the delivery time or destination are not available.
This feature is available in Postfix 2.5 and later.
Never send EHLO at the start of an SMTP session. See also the smtp_always_send_ehlo parameter.
Change the behavior of the smtp_*_timeout time limits, from a time limit per read or write system call, to a time limit to send or receive a complete record (an SMTP command line, SMTP response line, SMTP message content line, or TLS protocol message). This limits the impact from hostile peers that trickle data one byte at a time.
Note: when per-record deadlines are enabled, a short timeout may cause problems with TLS over very slow network connections. The reasons are that a TLS protocol message can be up to 16 kbytes long (with TLSv1), and that an entire TLS protocol message must be sent or received within the per-record deadline.
This feature is available in Postfix 2.9 and later. With older Postfix releases, the behavior is as if this parameter is set to "no".
How long the Postfix SMTP client pauses before sending ".<CR><LF>" in order to work around the PIX firewall "<CR><LF>.<CR><LF>" bug.
Choosing a too short time makes this workaround ineffective when sending large messages over slow network connections.
Lookup tables, indexed by the remote SMTP server address, with per-destination workarounds for CISCO PIX firewall bugs. The table is not indexed by hostname for consistency with smtp_discard_ehlo_keyword_address_maps.
This feature is available in Postfix 2.4 and later.
How long a message must be queued before the Postfix SMTP client turns on the PIX firewall "<CR><LF>.<CR><LF>" bug workaround for delivery through firewalls with "smtp fixup" mode turned on.
By default, the workaround is turned off for mail that is queued for less than 500 seconds. In other words, the workaround is normally turned off for the first delivery attempt.
Specify 0 to enable the PIX firewall "<CR><LF>.<CR><LF>" bug workaround upon the first delivery attempt.
A list that specifies zero or more workarounds for CISCO PIX firewall bugs. These workarounds are implemented by the Postfix SMTP client. Workaround names are separated by comma or space, and are case insensitive. This parameter setting can be overruled with per-destination smtp_pix_workaround_maps settings.
This feature is available in Postfix 2.4 and later. The default settings are backwards compatible with earlier Postfix versions.
The SMTP client time limit for sending the QUIT command, and for receiving the server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
Quote addresses in SMTP MAIL FROM and RCPT TO commands as required by RFC 2821. This includes putting quotes around an address localpart that ends in ".".
The default is to comply with RFC 2821. If you have to send mail to a broken SMTP server, configure a special SMTP client in master.cf:
/etc/postfix/master.cf:
broken-smtp . . . smtp -o smtp_quote_rfc821_envelope=no
and route mail for the destination in question to the "broken-smtp" message delivery with a transport(5) table.
This feature is available in Postfix 2.1 and later.
Randomize the order of equal-preference MX host addresses. This is a performance feature of the Postfix SMTP client.
The SMTP client time limit for sending the SMTP RCPT TO command, and for receiving the server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
A mechanism to transform replies from remote SMTP servers one line at a time. This is a last-resort tool to work around server replies that break inter-operability with the Postfix SMTP client. Other uses involve fault injection to test Postfix's handling of invalid responses.
Notes:
In the case of a multi-line reply, the Postfix SMTP client uses the final reply line's numerical SMTP reply code and enhanced status code.
The numerical SMTP reply code (XYZ) takes precedence over the enhanced status code (X.Y.Z). When the enhanced status code initial digit differs from the SMTP reply code initial digit, or when no enhanced status code is present, the Postfix SMTP client uses a generic enhanced status code (X.0.0) instead.
Specify the name of a "type:table" lookup table. The search string is a single SMTP reply line as received from the remote SMTP server, except that the trailing <CR><LF> are removed.
Examples:
/etc/postfix/main.cf:
smtp_reply_filter = pcre:/etc/postfix/reply_filter
/etc/postfix/reply_filter:
# Transform garbage into "250-filler..." so that it looks like
# one line from a multi-line reply. It does not matter what we
# substitute here as long it has the right syntax. The Postfix
# SMTP client will use the final line's numerical SMTP reply
# code and enhanced status code.
!/^([2-5][0-9][0-9]($|[- ]))/ 250-filler for garbage
This feature is available in Postfix 2.7.
The SMTP client time limit for sending the RSET command, and for receiving the server response. The SMTP client sends RSET in order to finish a recipient address probe, or to verify that a cached session is still usable.
This feature is available in Postfix 2.1 and later.
An optional table to prevent repeated SASL authentication failures with the same remote SMTP server hostname, username and password. Each table (key, value) pair contains a server name, a username and password, and the full server response. This information is stored when a remote SMTP server rejects an authentication attempt with a 535 reply code. As long as the smtp_sasl_password_maps information does no change, and as long as the smtp_sasl_auth_cache_name information does not expire (see smtp_sasl_auth_cache_time) the Postfix SMTP client avoids SASL authentication attempts with the same server, username and password, and instead bounces or defers mail as controlled with the smtp_sasl_auth_soft_bounce configuration parameter.
Use a per-destination delivery concurrency of 1 (for example, "smtp_destination_concurrency_limit = 1", "relay_destination_concurrency_limit = 1", etc.), otherwise multiple delivery agents may experience a login failure at the same time.
The table must be accessed via the proxywrite service, i.e. the map name must start with "proxy:". The table should be stored under the directory specified with the data_directory parameter.
This feature uses cryptographic hashing to protect plain-text passwords, and requires that Postfix is compiled with TLS support.
Example:
smtp_sasl_auth_cache_name = proxy:btree:/var/lib/postfix/sasl_auth_cache
This feature is available in Postfix 2.5 and later.
The maximal age of an smtp_sasl_auth_cache_name entry before it is removed.
This feature is available in Postfix 2.5 and later.
Enable SASL authentication in the Postfix SMTP client. By default, the Postfix SMTP client uses no authentication.
Example:
smtp_sasl_auth_enable = yes
When a remote SMTP server rejects a SASL authentication request with a 535 reply code, defer mail delivery instead of returning mail as undeliverable. The latter behavior was hard-coded prior to Postfix version 2.5.
Note: the setting "yes" overrides the global soft_bounce parameter, but the setting "no" does not.
Example:
# Default as of Postfix 2.5 smtp_sasl_auth_soft_bounce = yes # The old hard-coded default smtp_sasl_auth_soft_bounce = no
This feature is available in Postfix 2.5 and later.
If non-empty, a Postfix SMTP client filter for the remote SMTP server's list of offered SASL mechanisms. Different client and server implementations may support different mechanism lists. By default, the Postfix SMTP client will use the intersection of the two. smtp_sasl_mechanism_filter further restricts what server mechanisms the client will take into consideration.
Specify mechanism names, "/file/name" patterns or "type:table" lookup tables. The right-hand side result from "type:table" lookups is ignored. Specify "!pattern" to exclude a mechanism name from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
This feature is available in Postfix 2.2 and later.
Examples:
smtp_sasl_mechanism_filter = plain, login smtp_sasl_mechanism_filter = /etc/postfix/smtp_mechs smtp_sasl_mechanism_filter = !gssapi, !login, static:rest
Optional SMTP client lookup tables with one username:password entry per remote hostname or domain, or sender address when sender-dependent authentication is enabled. If no username:password entry is found, then the Postfix SMTP client will not attempt to authenticate to the remote host.
The Postfix SMTP client opens the lookup table before going to chroot jail, so you can leave the password file in /etc/postfix.
Implementation-specific information that the Postfix SMTP client passes through to the SASL plug-in implementation that is selected with smtp_sasl_type. Typically this specifies the name of a configuration file or rendezvous point.
This feature is available in Postfix 2.3 and later.
Postfix SMTP client SASL security options; as of Postfix 2.3 the list of available features depends on the SASL client implementation that is selected with smtp_sasl_type.
The following security features are defined for the cyrus client SASL implementation:
Specify zero or more of the following:
Example:
smtp_sasl_security_options = noplaintext
The SASL authentication security options that the Postfix SMTP client uses for TLS encrypted SMTP sessions.
This feature is available in Postfix 2.2 and later.
The SASL authentication security options that the Postfix SMTP client uses for TLS encrypted SMTP sessions with a verified server certificate.
When mail is sent to the public MX host for the recipient's domain, server certificates are by default optional, and delivery proceeds even if certificate verification fails. For delivery via a submission service that requires SASL authentication, it may be appropriate to send plaintext passwords only when the connection to the server is strongly encrypted and the server identity is verified.
The smtp_sasl_tls_verified_security_options parameter makes it possible to only enable plaintext mechanisms when a secure connection to the server is available. Submission servers subject to this policy must either have verifiable certificates or offer suitable non-plaintext SASL mechanisms.
This feature is available in Postfix 2.6 and later.
The SASL plug-in type that the Postfix SMTP client should use for authentication. The available types are listed with the "postconf -A" command.
This feature is available in Postfix 2.3 and later.
Send the non-standard XFORWARD command when the Postfix SMTP server EHLO response announces XFORWARD support.
This allows an "smtp" delivery agent, used for injecting mail into a content filter, to forward the name, address, protocol and HELO name of the original client to the content filter and downstream queuing SMTP server. This can produce more useful logging than localhost[127.0.0.1] etc.
This feature is available in Postfix 2.1 and later.
Enable sender-dependent authentication in the Postfix SMTP client; this is available only with SASL authentication, and disables SMTP connection caching to ensure that mail from different senders will use the appropriate credentials.
This feature is available in Postfix 2.3 and later.
Skip SMTP servers that greet with a 4XX status code (go away, try again later).
By default, Postfix moves on the next mail exchanger. Specify "smtp_skip_4xx_greeting = no" if Postfix should defer delivery immediately.
This feature is available in Postfix 2.0 and earlier. Later Postfix versions always skip SMTP servers that greet with a 4XX status code.
Skip SMTP servers that greet with a 5XX status code (go away, do not try again later).
By default, the Postfix SMTP client moves on the next mail exchanger. Specify "smtp_skip_5xx_greeting = no" if Postfix should bounce the mail immediately. The default setting is incorrect, but it is what a lot of people expect to happen.
Do not wait for the response to the SMTP QUIT command.
Time limit for Postfix SMTP client write and read operations during TLS startup and shutdown handshake procedures.
This feature is available in Postfix 2.2 and later.
A file containing CA certificates of root CAs trusted to sign either remote SMTP server certificates or intermediate CA certificates. These are loaded into memory before the smtp(8) client enters the chroot jail. If the number of trusted roots is large, consider using smtp_tls_CApath instead, but note that the latter directory must be present in the chroot jail if the smtp(8) client is chrooted. This file may also be used to augment the client certificate trust chain, but it is best to include all the required certificates directly in $smtp_tls_cert_file.
Specify "tls_append_default_CA = no" to prevent Postfix from appending the system-supplied default CAs and trusting third-party certificates.
Example:
smtp_tls_CAfile = /etc/postfix/CAcert.pem
This feature is available in Postfix 2.2 and later.
Directory with PEM format certificate authority certificates that the Postfix SMTP client uses to verify a remote SMTP server certificate. Don't forget to create the necessary "hash" links with, for example, "$OPENSSL_HOME/bin/c_rehash /etc/postfix/certs".
To use this option in chroot mode, this directory (or a copy) must be inside the chroot jail.
Specify "tls_append_default_CA = no" to prevent Postfix from appending the system-supplied default CAs and trusting third-party certificates.
Example:
smtp_tls_CApath = /etc/postfix/certs
This feature is available in Postfix 2.2 and later.
Try to detect a mail hijacking attack based on a TLS protocol vulnerability (CVE-2009-3555), where an attacker prepends malicious HELO, MAIL, RCPT, DATA commands to a Postfix SMTP client TLS session. The attack would succeed with non-Postfix SMTP servers that reply to the malicious HELO, MAIL, RCPT, DATA commands after negotiating the Postfix SMTP client TLS session.
This feature is available in Postfix 2.7.
File with the Postfix SMTP client RSA certificate in PEM format. This file may also contain the Postfix SMTP client private RSA key, and these may be the same as the Postfix SMTP server RSA certificate and key file.
Do not configure client certificates unless you must present client TLS certificates to one or more servers. Client certificates are not usually needed, and can cause problems in configurations that work well without them. The recommended setting is to let the defaults stand:
smtp_tls_cert_file = smtp_tls_key_file = smtp_tls_dcert_file = smtp_tls_dkey_file = smtp_tls_eccert_file = smtp_tls_eckey_file =
The best way to use the default settings is to comment out the above parameters in main.cf if present.
To enable remote SMTP servers to verify the Postfix SMTP client certificate, the issuing CA certificates must be made available to the server. You should include the required certificates in the client certificate file, the client certificate first, then the issuing CA(s) (bottom-up order).
Example: the certificate for "client.example.com" was issued by "intermediate CA" which itself has a certificate issued by "root CA". Create the client.pem file with "cat client_cert.pem intermediate_CA.pem root_CA.pem > client.pem".
If you also want to verify remote SMTP server certificates issued by these CAs, you can add the CA certificates to the smtp_tls_CAfile, in which case it is not necessary to have them in the smtp_tls_cert_file, smtp_tls_dcert_file or smtp_tls_eccert_file.
A certificate supplied here must be usable as an SSL client certificate and hence pass the "openssl verify -purpose sslclient ..." test.
Example:
smtp_tls_cert_file = /etc/postfix/client.pem
This feature is available in Postfix 2.2 and later.
Obsolete Postfix < 2.3 control for the Postfix SMTP client TLS cipher list. As this feature applies to all TLS security levels, it is easy to create inter-operability problems by choosing a non-default cipher list. Do not use a non-default TLS cipher list on hosts that deliver email to the public Internet: you will be unable to send email to servers that only support the ciphers you exclude. Using a restricted cipher list may be more appropriate for an internal MTA, where one can exert some control over the TLS software and settings of the peer servers.
Note: do not use "" quotes around the parameter value.
This feature is available in Postfix version 2.2. It is not used with Postfix 2.3 and later; use smtp_tls_mandatory_ciphers instead.
The minimum TLS cipher grade that the Postfix SMTP client will use with opportunistic TLS encryption. Cipher types listed in smtp_tls_exclude_ciphers are excluded from the base definition of the selected cipher grade. The default value "export" ensures maximum inter-operability. Because encryption is optional, stronger controls are not appropriate, and this setting SHOULD NOT be changed unless the change is essential.
When TLS is mandatory the cipher grade is chosen via the smtp_tls_mandatory_ciphers configuration parameter, see there for syntax details. See smtp_tls_policy_maps for information on how to configure ciphers on a per-destination basis.
Example:
smtp_tls_ciphers = export
This feature is available in Postfix 2.6 and later. With earlier Postfix releases only the smtp_tls_mandatory_ciphers parameter is implemented, and opportunistic TLS always uses "export" or better (i.e. all) ciphers.
File with the Postfix SMTP client DSA certificate in PEM format. This file may also contain the Postfix SMTP client private DSA key.
See the discussion under smtp_tls_cert_file for more details.
Example:
smtp_tls_dcert_file = /etc/postfix/client-dsa.pem
This feature is available in Postfix 2.2 and later.
File with the Postfix SMTP client DSA private key in PEM format. This file may be combined with the Postfix SMTP client DSA certificate file specified with $smtp_tls_dcert_file.
The private key must be accessible without a pass-phrase, i.e. it must not be encrypted. File permissions should grant read-only access to the system superuser account ("root"), and no access to anyone else.
This feature is available in Postfix 2.2 and later.
File with the Postfix SMTP client ECDSA certificate in PEM format. This file may also contain the Postfix SMTP client ECDSA private key.
See the discussion under smtp_tls_cert_file for more details.
Example:
smtp_tls_eccert_file = /etc/postfix/ecdsa-ccert.pem
This feature is available in Postfix 2.6 and later, when Postfix is compiled and linked with OpenSSL 1.0.0 or later.
File with the Postfix SMTP client ECDSA private key in PEM format. This file may be combined with the Postfix SMTP client ECDSA certificate file specified with $smtp_tls_eccert_file.
The private key must be accessible without a pass-phrase, i.e. it must not be encrypted. File permissions should grant read-only access to the system superuser account ("root"), and no access to anyone else.
This feature is available in Postfix 2.6 and later, when Postfix is compiled and linked with OpenSSL 1.0.0 or later.
With mandatory TLS encryption, require that the remote SMTP server hostname matches the information in the remote SMTP server certificate. As of RFC 2487 the requirements for hostname checking for MTA clients are not specified.
This option can be set to "no" to disable strict peer name checking. This setting has no effect on sessions that are controlled via the smtp_tls_per_site table.
Disabling the hostname verification can make sense in closed environment where special CAs are created. If not used carefully, this option opens the danger of a "man-in-the-middle" attack (the CommonName of this attacker will be logged).
This feature is available in Postfix 2.2 and later. With Postfix 2.3 and later use smtp_tls_security_level instead.
List of ciphers or cipher types to exclude from the Postfix SMTP client cipher list at all TLS security levels. This is not an OpenSSL cipherlist, it is a simple list separated by whitespace and/or commas. The elements are a single cipher, or one or more "+" separated cipher properties, in which case only ciphers matching all the properties are excluded.
Examples (some of these will cause problems):
smtp_tls_exclude_ciphers = aNULL smtp_tls_exclude_ciphers = MD5, DES smtp_tls_exclude_ciphers = DES+MD5 smtp_tls_exclude_ciphers = AES256-SHA, DES-CBC3-MD5 smtp_tls_exclude_ciphers = kEDH+aRSA
The first setting, disables anonymous ciphers. The next setting disables ciphers that use the MD5 digest algorithm or the (single) DES encryption algorithm. The next setting disables ciphers that use MD5 and DES together. The next setting disables the two ciphers "AES256-SHA" and "DES-CBC3-MD5". The last setting disables ciphers that use "EDH" key exchange with RSA authentication.
This feature is available in Postfix 2.3 and later.
List of acceptable remote SMTP server certificate fingerprints for the "fingerprint" TLS security level (smtp_tls_security_level = fingerprint). At this security level, certificate authorities are not used, and certificate expiration times are ignored. Instead, server certificates are verified directly via their "fingerprint". The fingerprint is a message digest of the server certificate. The digest algorithm is selected via the smtp_tls_fingerprint_digest parameter.
When an smtp_tls_policy_maps table entry specifies the "fingerprint" security level, any "match" attributes in that entry specify the list of valid fingerprints for the corresponding destination. Multiple fingerprints can be combined with a "|" delimiter in a single match attribute, or multiple match attributes can be employed.
Example: Certificate fingerprint verification with internal mailhub. Two matching fingerprints are listed. The relayhost may be multiple physical hosts behind a load-balancer, each with its own private/public key and self-signed certificate. Alternatively, a single relayhost may be in the process of switching from one set of private/public keys to another, and both keys are trusted just prior to the transition.
relayhost = [mailhub.example.com]
smtp_tls_security_level = fingerprint
smtp_tls_fingerprint_digest = md5
smtp_tls_fingerprint_cert_match =
3D:95:34:51:24:66:33:B9:D2:40:99:C0:C1:17:0B:D1
EC:3B:2D:B0:5B:B1:FB:6D:20:A3:9D:72:F6:8D:12:35
Example: Certificate fingerprint verification with selected destinations. As in the example above, we show two matching fingerprints:
/etc/postfix/main.cf:
smtp_tls_policy_maps = hash:/etc/postfix/tls_policy
smtp_tls_fingerprint_digest = md5
/etc/postfix/tls_policy:
example.com fingerprint
match=3D:95:34:51:24:66:33:B9:D2:40:99:C0:C1:17:0B:D1
match=EC:3B:2D:B0:5B:B1:FB:6D:20:A3:9D:72:F6:8D:12:35
This feature is available in Postfix 2.5 and later.
The message digest algorithm used to construct remote SMTP server certificate fingerprints. At the "fingerprint" TLS security level (smtp_tls_security_level = fingerprint), the server certificate is verified by directly matching its fingerprint. The fingerprint is the message digest of the server certificate using the selected algorithm. With a digest algorithm resistant to "second pre-image" attacks, it is not feasible to create a new public key and a matching certificate that has the same fingerprint.
The default algorithm is md5; this is consistent with the backwards compatible setting of the digest used to verify client certificates in the SMTP server.
The best practice algorithm is now sha1. Recent advances in hash function cryptanalysis have led to md5 being deprecated in favor of sha1. However, as long as there are no known "second pre-image" attacks against md5, its use in this context can still be considered safe.
While additional digest algorithms are often available with OpenSSL's libcrypto, only those used by libssl in SSL cipher suites are available to Postfix. For now this means just md5 or sha1.
To find the fingerprint of a specific certificate file, with a specific digest algorithm, run:
$ openssl x509 -noout -fingerprint -digest -in certfile.pem
The text to the right of "=" sign is the desired fingerprint. For example:
$ openssl x509 -noout -fingerprint -sha1 -in cert.pem SHA1 Fingerprint=D4:6A:AB:19:24:79:F8:32:BB:A6:CB:66:82:C0:8E:9B:EE:29:A8:1A
This feature is available in Postfix 2.5 and later.
File with the Postfix SMTP client RSA private key in PEM format. This file may be combined with the Postfix SMTP client RSA certificate file specified with $smtp_tls_cert_file.
The private key must be accessible without a pass-phrase, i.e. it must not be encrypted. File permissions should grant read-only access to the system superuser account ("root"), and no access to anyone else.
Example:
smtp_tls_key_file = $smtp_tls_cert_file
This feature is available in Postfix 2.2 and later.
Enable additional Postfix SMTP client logging of TLS activity. Each logging level also includes the information that is logged at a lower logging level.
Use "smtp_tls_loglevel = 3" only in case of problems. Use of loglevel 4 is strongly discouraged.
This feature is available in Postfix 2.2 and later.
The minimum TLS cipher grade that the Postfix SMTP client will use with mandatory TLS encryption. The default value "medium" is suitable for most destinations with which you may want to enforce TLS, and is beyond the reach of today's cryptanalytic methods. See smtp_tls_policy_maps for information on how to configure ciphers on a per-destination basis.
The following cipher grades are supported:
The underlying cipherlists for grades other than "null" include anonymous ciphers, but these are automatically filtered out if the Postfix SMTP client is configured to verify server certificates. You are very unlikely to need to take any steps to exclude anonymous ciphers, they are excluded automatically as necessary. If you must exclude anonymous ciphers at the "may" or "encrypt" security levels, when the Postfix SMTP client does not need or use peer certificates, set "smtp_tls_exclude_ciphers = aNULL". To exclude anonymous ciphers only when TLS is enforced, set "smtp_tls_mandatory_exclude_ciphers = aNULL".
This feature is available in Postfix 2.3 and later.
Additional list of ciphers or cipher types to exclude from the SMTP client cipher list at mandatory TLS security levels. This list works in addition to the exclusions listed with smtp_tls_exclude_ciphers (see there for syntax details).
Starting with Postfix 2.6, the mandatory cipher exclusions can be specified on a per-destination basis via the TLS policy "exclude" attribute. See smtp_tls_policy_maps for notes and examples.
This feature is available in Postfix 2.3 and later.
List of SSL/TLS protocols that the Postfix SMTP client will use with mandatory TLS encryption. In main.cf the values are separated by whitespace, commas or colons. In the policy table "protocols" attribute (see smtp_tls_policy_maps) the only valid separator is colon. An empty value means allow all protocols. The valid protocol names, (see SSL_get_version(3)), are "SSLv2", "SSLv3" and "TLSv1".
With Postfix ≥ 2.5 the parameter syntax is expanded to support protocol exclusions. One can now explicitly exclude SSLv2 by setting "smtp_tls_mandatory_protocols = !SSLv2". To exclude both SSLv2 and SSLv3 set "smtp_tls_mandatory_protocols = !SSLv2, !SSLv3". Listing the protocols to include, rather than protocols to exclude, is still supported; use the form you find more intuitive.
Since SSL version 2 has known protocol weaknesses and is now deprecated, the default setting excludes "SSLv2". This means that by default, SSL version 2 will not be used at the "encrypt" security level and higher.
See the documentation of the smtp_tls_policy_maps parameter and TLS_README for more information about security levels.
Example:
smtp_tls_mandatory_protocols = TLSv1 # Alternative form with Postfix ≥ 2.5: smtp_tls_mandatory_protocols = !SSLv2, !SSLv3
This feature is available in Postfix 2.3 and later.
Log the hostname of a remote SMTP server that offers STARTTLS, when TLS is not already enabled for that server.
The logfile record looks like:
postfix/smtp[pid]: Host offered STARTTLS: [name.of.host]
This feature is available in Postfix 2.2 and later.
Optional lookup tables with the Postfix SMTP client TLS usage policy by next-hop destination and by remote SMTP server hostname. When both lookups succeed, the more specific per-site policy (NONE, MUST, etc) overrides the less specific one (MAY), and the more secure per-site policy (MUST, etc) overrides the less secure one (NONE). With Postfix 2.3 and later smtp_tls_per_site is strongly discouraged: use smtp_tls_policy_maps instead.
Use of the bare hostname as the per-site table lookup key is discouraged. Always use the full destination nexthop (enclosed in [] with a possible ":port" suffix). A recipient domain or MX-enabled transport next-hop with no port suffix may look like a bare hostname, but is still a suitable destination.
Specify a next-hop destination or server hostname on the left-hand side; no wildcards are allowed. The next-hop destination is either the recipient domain, or the destination specified with a transport(5) table, the relayhost parameter, or the relay_transport parameter. On the right hand side specify one of the following keywords:
The above keywords correspond to the "none", "may", "encrypt" and "verify" security levels for the new smtp_tls_security_level parameter introduced in Postfix 2.3. Starting with Postfix 2.3, and independently of how the policy is specified, the smtp_tls_mandatory_ciphers and smtp_tls_mandatory_protocols parameters apply when TLS encryption is mandatory. Connections for which encryption is optional typically enable all "export" grade and better ciphers (see smtp_tls_ciphers and smtp_tls_protocols).
As long as no secure DNS lookup mechanism is available, false hostnames in MX or CNAME responses can change the server hostname that Postfix uses for TLS policy lookup and server certificate verification. Even with a perfect match between the server hostname and the server certificate, there is no guarantee that Postfix is connected to the right server. See TLS_README (Closing a DNS loophole with obsolete per-site TLS policies) for a possible work-around.
This feature is available in Postfix 2.2 and later. With Postfix 2.3 and later use smtp_tls_policy_maps instead.
Optional lookup tables with the Postfix SMTP client TLS security policy by next-hop destination; when a non-empty value is specified, this overrides the obsolete smtp_tls_per_site parameter. See TLS_README for a more detailed discussion of TLS security levels.
The TLS policy table is indexed by the full next-hop destination, which is either the recipient domain, or the verbatim next-hop specified in the transport table, $local_transport, $virtual_transport, $relay_transport or $default_transport. This includes any enclosing square brackets and any non-default destination server port suffix. The LMTP socket type prefix (inet: or unix:) is not included in the lookup key.
Only the next-hop domain, or $myhostname with LMTP over UNIX-domain sockets, is used as the nexthop name for certificate verification. The port and any enclosing square brackets are used in the table lookup key, but are not used for server name verification.
When the lookup key is a domain name without enclosing square brackets or any :port suffix (typically the recipient domain), and the full domain is not found in the table, just as with the transport(5) table, the parent domain starting with a leading "." is matched recursively. This allows one to specify a security policy for a recipient domain and all its sub-domains.
The lookup result is a security level, followed by an optional list of whitespace and/or comma separated name=value attributes that override related main.cf settings. The TLS security levels in order of increasing security are:
Example:
/etc/postfix/main.cf:
smtp_tls_policy_maps = hash:/etc/postfix/tls_policy
# Postfix 2.5 and later
smtp_tls_fingerprint_digest = md5
/etc/postfix/tls_policy:
example.edu none
example.mil may
example.gov encrypt protocols=TLSv1
example.com verify ciphers=high
example.net secure
.example.net secure match=.example.net:example.net
[mail.example.org]:587 secure match=nexthop
# Postfix 2.5 and later
[thumb.example.org] fingerprint
match=EC:3B:2D:B0:5B:B1:FB:6D:20:A3:9D:72:F6:8D:12:35
match=3D:95:34:51:24:66:33:B9:D2:40:99:C0:C1:17:0B:D1
Note: The hostname strategy if listed in a non-default setting of smtp_tls_secure_cert_match or in the match attribute in the policy table can render the secure level vulnerable to DNS forgery. Do not use the hostname strategy for secure-channel configurations in environments where DNS security is not assured.
This feature is available in Postfix 2.3 and later.
List of TLS protocols that the Postfix SMTP client will exclude or include with opportunistic TLS encryption. Starting with Postfix 2.6, the Postfix SMTP client will by default not use the obsolete SSLv2 protocol.
In main.cf the values are separated by whitespace, commas or colons. In the policy table (see smtp_tls_policy_maps) the only valid separator is colon. An empty value means allow all protocols. The valid protocol names, (see SSL_get_version(3)), are "SSLv2", "SSLv3" and "TLSv1".
To include a protocol list its name, to exclude it, prefix the name with a "!" character. To exclude SSLv2 even for opportunistic TLS set "smtp_tls_protocols = !SSLv2". To exclude both "SSLv2" and "SSLv3" set "smtp_tls_protocols = !SSLv2, !SSLv3". Explicitly listing the protocols to include, is supported, but not recommended. OpenSSL provides no mechanisms for excluding protocols not known at compile-time. If Postfix is linked against an OpenSSL library that supports additional protocol versions, they cannot be excluded using either syntax.
Example:
# TLSv1 only! smtp_tls_protocols = !SSLv2, !SSLv3
This feature is available in Postfix 2.6 and later.
The verification depth for remote SMTP server certificates. A depth of 1 is sufficient if the issuing CA is listed in a local CA file.
The default verification depth is 9 (the OpenSSL default) for compatibility with earlier Postfix behavior. Prior to Postfix 2.5, the default value was 5, but the limit was not actually enforced. If you have set this to a lower non-default value, certificates with longer trust chains may now fail to verify. Certificate chains with 1 or 2 CAs are common, deeper chains are more rare and any number between 5 and 9 should suffice in practice. You can choose a lower number if, for example, you trust certificates directly signed by an issuing CA but not any CAs it delegates to.
This feature is available in Postfix 2.2 and later.
The server certificate peername verification method for the "secure" TLS security level. In a "secure" TLS policy table ($smtp_tls_policy_maps) entry the optional "match" attribute overrides this main.cf setting.
This parameter specifies one or more patterns or strategies separated by commas, whitespace or colons. In the policy table the only valid separator is the colon character.
For a description of the pattern and strategy syntax see the smtp_tls_verify_cert_match parameter. The "hostname" strategy should be avoided in this context, as in the absence of a secure global DNS, using the results of MX lookups in certificate verification is not immune to active (man-in-the-middle) attacks on DNS.
Sample main.cf setting:
smtp_tls_secure_cert_match = nexthop
Sample policy table override:
example.net secure match=example.com:.example.com .example.net secure match=example.com:.example.com
This feature is available in Postfix 2.3 and later.
The default SMTP TLS security level for the Postfix SMTP client; when a non-empty value is specified, this overrides the obsolete parameters smtp_use_tls, smtp_enforce_tls, and smtp_tls_enforce_peername.
Specify one of the following security levels:
Examples:
# No TLS. Formerly: smtp_use_tls=no and smtp_enforce_tls=no. smtp_tls_security_level = none
# Opportunistic TLS. smtp_tls_security_level = may # Postfix ≥ 2.6: # Do not tweak opportunistic ciphers or protocol unless it is essential # to do so (if a security vulnerability is found in the SSL library that # can be mitigated by disabling a particular protocol or raising the # cipher grade from "export" to "low" or "medium"). smtp_tls_ciphers = export smtp_tls_protocols = !SSLv2
# Mandatory (high-grade) TLS encryption. smtp_tls_security_level = encrypt smtp_tls_mandatory_ciphers = high
# Mandatory TLS verification of hostname or nexthop domain. smtp_tls_security_level = verify smtp_tls_mandatory_ciphers = high smtp_tls_verify_cert_match = hostname, nexthop, dot-nexthop
# Secure channel TLS with exact nexthop name match. smtp_tls_security_level = secure smtp_tls_mandatory_protocols = TLSv1 smtp_tls_mandatory_ciphers = high smtp_tls_secure_cert_match = nexthop
# Certificate fingerprint verification (Postfix ≥ 2.5).
# The CA-less "fingerprint" security level only scales to a limited
# number of destinations. As a global default rather than a per-site
# setting, this is practical when mail for all recipients is sent
# to a central mail hub.
relayhost = [mailhub.example.com]
smtp_tls_security_level = fingerprint
smtp_tls_mandatory_protocols = !SSLv2, !SSLv3
smtp_tls_mandatory_ciphers = high
smtp_tls_fingerprint_cert_match =
3D:95:34:51:24:66:33:B9:D2:40:99:C0:C1:17:0B:D1
EC:3B:2D:B0:5B:B1:FB:6D:20:A3:9D:72:F6:8D:12:35
This feature is available in Postfix 2.3 and later.
Name of the file containing the optional Postfix SMTP client TLS session cache. Specify a database type that supports enumeration, such as btree or sdbm; there is no need to support concurrent access. The file is created if it does not exist. The smtp(8) daemon does not use this parameter directly, rather the cache is implemented indirectly in the tlsmgr(8) daemon. This means that per-smtp-instance master.cf overrides of this parameter are not effective. Note, that each of the cache databases supported by tlsmgr(8) daemon: $smtpd_tls_session_cache_database, $smtp_tls_session_cache_database (and with Postfix 2.3 and later $lmtp_tls_session_cache_database), needs to be stored separately. It is not at this time possible to store multiple caches in a single database.
Note: dbm databases are not suitable. TLS session objects are too large.
As of version 2.5, Postfix no longer uses root privileges when opening this file. The file should now be stored under the Postfix-owned data_directory. As a migration aid, an attempt to open the file under a non-Postfix directory is redirected to the Postfix-owned data_directory, and a warning is logged.
Example:
smtp_tls_session_cache_database = btree:/var/lib/postfix/smtp_scache
This feature is available in Postfix 2.2 and later.
The expiration time of Postfix SMTP client TLS session cache information. A cache cleanup is performed periodically every $smtp_tls_session_cache_timeout seconds. As with $smtp_tls_session_cache_database, this parameter is implemented in the tlsmgr(8) daemon and therefore per-smtp-instance master.cf overrides are not possible.
This feature is available in Postfix 2.2 and later.
The server certificate peername verification method for the "verify" TLS security level. In a "verify" TLS policy table ($smtp_tls_policy_maps) entry the optional "match" attribute overrides this main.cf setting.
This parameter specifies one or more patterns or strategies separated by commas, whitespace or colons. In the policy table the only valid separator is the colon character.
Patterns specify domain names, or domain name suffixes:
Strategies specify a transformation from the next-hop domain to the expected name in the server certificate:
Sample main.cf setting:
smtp_tls_verify_cert_match = hostname, nexthop, dot-nexthop
Sample policy table override:
example.com verify match=hostname:nexthop .example.com verify match=example.com:.example.com:hostname
This feature is available in Postfix 2.3 and later.
Opportunistic mode: use TLS when a remote SMTP server announces STARTTLS support, otherwise send the mail in the clear. Beware: some SMTP servers offer STARTTLS even if it is not configured. With Postfix < 2.3, if the TLS handshake fails, and no other server is available, delivery is deferred and mail stays in the queue. If this is a concern for you, use the smtp_tls_per_site feature instead.
This feature is available in Postfix 2.2 and later. With Postfix 2.3 and later use smtp_tls_security_level instead.
The SMTP client time limit for sending the XFORWARD command, and for receiving the server response.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
This feature is available in Postfix 2.1 and later.
What SMTP clients are allowed to specify the XVERP command. This command requests that mail be delivered one recipient at a time with a per recipient return address.
By default, no clients are allowed to specify XVERP.
This parameter was renamed with Postfix version 2.1. The default value is backwards compatible with Postfix version 2.0.
Specify a list of network/netmask patterns, separated by commas and/or whitespace. The mask specifies the number of bits in the network part of a host address. You can also specify hostnames or .domain names (the initial dot causes the domain to match any name below it), "/file/name" or "type:table" patterns. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a table entry matches a lookup string (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude an address or network block from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
Note: IP version 6 address information must be specified inside [] in the smtpd_authorized_verp_clients value, and in files specified with "/file/name". IP version 6 addresses contain the ":" character, and would otherwise be confused with a "type:table" pattern.
What SMTP clients are allowed to use the XCLIENT feature. This command overrides SMTP client information that is used for access control. Typical use is for SMTP-based content filters, fetchmail-like programs, or SMTP server access rule testing. See the XCLIENT_README document for details.
This feature is available in Postfix 2.1 and later.
By default, no clients are allowed to specify XCLIENT.
Specify a list of network/netmask patterns, separated by commas and/or whitespace. The mask specifies the number of bits in the network part of a host address. You can also specify hostnames or .domain names (the initial dot causes the domain to match any name below it), "/file/name" or "type:table" patterns. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a table entry matches a lookup string (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude an address or network block from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
Note: IP version 6 address information must be specified inside [] in the smtpd_authorized_xclient_hosts value, and in files specified with "/file/name". IP version 6 addresses contain the ":" character, and would otherwise be confused with a "type:table" pattern.
What SMTP clients are allowed to use the XFORWARD feature. This command forwards information that is used to improve logging after SMTP-based content filters. See the XFORWARD_README document for details.
This feature is available in Postfix 2.1 and later.
By default, no clients are allowed to specify XFORWARD.
Specify a list of network/netmask patterns, separated by commas and/or whitespace. The mask specifies the number of bits in the network part of a host address. You can also specify hostnames or .domain names (the initial dot causes the domain to match any name below it), "/file/name" or "type:table" patterns. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a table entry matches a lookup string (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude an address or network block from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
Note: IP version 6 address information must be specified inside [] in the smtpd_authorized_xforward_hosts value, and in files specified with "/file/name". IP version 6 addresses contain the ":" character, and would otherwise be confused with a "type:table" pattern.
The text that follows the 220 status code in the SMTP greeting banner. Some people like to see the mail version advertised. By default, Postfix shows no version.
You MUST specify $myhostname at the start of the text. This is required by the SMTP protocol.
Example:
smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
How many simultaneous connections any client is allowed to make to this service. By default, the limit is set to half the default process limit value.
To disable this feature, specify a limit of 0.
WARNING: The purpose of this feature is to limit abuse. It must not be used to regulate legitimate mail traffic.
This feature is available in Postfix 2.2 and later.
The maximal number of connection attempts any client is allowed to make to this service per time unit. The time unit is specified with the anvil_rate_time_unit configuration parameter.
By default, a client can make as many connections per time unit as Postfix can accept.
To disable this feature, specify a limit of 0.
WARNING: The purpose of this feature is to limit abuse. It must not be used to regulate legitimate mail traffic.
This feature is available in Postfix 2.2 and later.
Example:
smtpd_client_connection_rate_limit = 1000
Clients that are excluded from smtpd_client_*_count/rate_limit restrictions. See the mynetworks parameter description for the parameter value syntax.
By default, clients in trusted networks are excluded. Specify a list of network blocks, hostnames or .domain names (the initial dot causes the domain to match any name below it).
Note: IP version 6 address information must be specified inside [] in the smtpd_client_event_limit_exceptions value, and in files specified with "/file/name". IP version 6 addresses contain the ":" character, and would otherwise be confused with a "type:table" pattern.
This feature is available in Postfix 2.2 and later.
The maximal number of message delivery requests that any client is allowed to make to this service per time unit, regardless of whether or not Postfix actually accepts those messages. The time unit is specified with the anvil_rate_time_unit configuration parameter.
By default, a client can send as many message delivery requests per time unit as Postfix can accept.
To disable this feature, specify a limit of 0.
WARNING: The purpose of this feature is to limit abuse. It must not be used to regulate legitimate mail traffic.
This feature is available in Postfix 2.2 and later.
Example:
smtpd_client_message_rate_limit = 1000
The maximal number of new (i.e., uncached) TLS sessions that a remote SMTP client is allowed to negotiate with this service per time unit. The time unit is specified with the anvil_rate_time_unit configuration parameter.
By default, a remote SMTP client can negotiate as many new TLS sessions per time unit as Postfix can accept.
To disable this feature, specify a limit of 0. Otherwise, specify a limit that is at least the per-client concurrent session limit, or else legitimate client sessions may be rejected.
WARNING: The purpose of this feature is to limit abuse. It must not be used to regulate legitimate mail traffic.
This feature is available in Postfix 2.3 and later.
Example:
smtpd_client_new_tls_session_rate_limit = 100
Enable logging of the remote SMTP client port in addition to the hostname and IP address. The logging format is "host[address]:port".
This feature is available in Postfix 2.5 and later.
The maximal number of recipient addresses that any client is allowed to send to this service per time unit, regardless of whether or not Postfix actually accepts those recipients. The time unit is specified with the anvil_rate_time_unit configuration parameter.
By default, a client can send as many recipient addresses per time unit as Postfix can accept.
To disable this feature, specify a limit of 0.
WARNING: The purpose of this feature is to limit abuse. It must not be used to regulate legitimate mail traffic.
This feature is available in Postfix 2.2 and later.
Example:
smtpd_client_recipient_rate_limit = 1000
Optional SMTP server access restrictions in the context of a client SMTP connection request. See SMTPD_ACCESS_README, section "Delayed evaluation of SMTP access restriction lists" for a discussion of evaluation context and time.
The default is to allow all connection requests.
Specify a list of restrictions, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace. Restrictions are applied in the order as specified; the first restriction that matches wins.
The following restrictions are specific to client hostname or client network address information.
In addition, you can use any of the following generic restrictions. These restrictions are applicable in any SMTP command context.
/etc/postfix/main.cf:
smtpd_client_restrictions =
sleep 1, reject_unauth_pipelining
smtpd_delay_reject = no
This feature is available in Postfix 2.3. Other restrictions that are valid in this context:
Example:
smtpd_client_restrictions = permit_mynetworks, reject_unknown_client_hostname
A mechanism to transform commands from remote SMTP clients. This is a last-resort tool to work around client commands that break inter-operability with the Postfix SMTP server. Other uses involve fault injection to test Postfix's handling of invalid commands.
Specify the name of a "type:table" lookup table. The search string is the SMTP command as received from the remote SMTP client, except that initial whitespace and the trailing <CR><LF> are removed. The result value is executed by the Postfix SMTP server.
There is no need to use smtpd_command_filter for the following cases:
Use "resolve_numeric_domain = yes" to accept "user@ipaddress".
Postfix already accepts the correct form "user@[ipaddress]". Use virtual_alias_maps or canonical_maps to translate these into domain names if necessary.
Use "strict_rfc821_envelopes = no" to accept "RCPT TO:<User Name <[email protected]>>". Postfix will ignore the "User Name" part and deliver to the <[email protected]> address.
Examples of problems that can be solved with the smtpd_command_filter feature:
/etc/postfix/main.cf:
smtpd_command_filter = pcre:/etc/postfix/command_filter
/etc/postfix/command_filter:
# Work around clients that send malformed HELO commands.
/^HELO\s*$/ HELO domain.invalid
# Work around clients that send empty lines.
/^\s*$/ NOOP
# Work around clients that send RCPT TO:<'user@domain'>.
# WARNING: do not lose the parameters that follow the address.
/^RCPT\s+TO:\s*<'([^[:space:]]+)'>(.*)/ RCPT TO:<$1>$2
# Bounce-never mail sink. Use notify_classes=bounce,resource,software
# to send bounced mail to the postmaster (with message body removed).
/^(RCPT\s+TO:.*?)\bNOTIFY=\S+\b(.*)/ $1 NOTIFY=NEVER $2
/^(RCPT\s+TO:.*)/ $1 NOTIFY=NEVER
This feature is available in Postfix 2.7.
Optional access restrictions that the Postfix SMTP server applies in the context of the SMTP DATA command. See SMTPD_ACCESS_README, section "Delayed evaluation of SMTP access restriction lists" for a discussion of evaluation context and time.
This feature is available in Postfix 2.0 and later.
Specify a list of restrictions, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace. Restrictions are applied in the order as specified; the first restriction that matches wins.
The following restrictions are valid in this context:
Examples:
smtpd_data_restrictions = reject_unauth_pipelining smtpd_data_restrictions = reject_multi_recipient_bounce
Postpone the start of an SMTP mail transaction until a valid RCPT TO command is received. Specify "no" to create a mail transaction as soon as the SMTP server receives a valid MAIL FROM command.
With sites that reject lots of mail, the default setting reduces the use of disk, CPU and memory resources. The downside is that rejected recipients are logged with NOQUEUE instead of a mail transaction ID. This complicates the logfile analysis of multi-recipient mail.
This feature is available in Postfix 2.3 and later.
Wait until the RCPT TO command before evaluating $smtpd_client_restrictions, $smtpd_helo_restrictions and $smtpd_sender_restrictions, or wait until the ETRN command before evaluating $smtpd_client_restrictions and $smtpd_helo_restrictions.
This feature is turned on by default because some clients apparently mis-behave when the Postfix SMTP server rejects commands before RCPT TO.
The default setting has one major benefit: it allows Postfix to log recipient address information when rejecting a client name/address or sender address, so that it is possible to find out whose mail is being rejected.
Lookup tables, indexed by the remote SMTP client address, with case insensitive lists of EHLO keywords (pipelining, starttls, auth, etc.) that the SMTP server will not send in the EHLO response to a remote SMTP client. See smtpd_discard_ehlo_keywords for details. The table is not searched by hostname for robustness reasons.
This feature is available in Postfix 2.2 and later.
A case insensitive list of EHLO keywords (pipelining, starttls, auth, etc.) that the SMTP server will not send in the EHLO response to a remote SMTP client.
This feature is available in Postfix 2.2 and later.
Notes:
Specify the silent-discard pseudo keyword to prevent this action from being logged.
Use the smtpd_discard_ehlo_keyword_address_maps feature to discard EHLO keywords selectively.
Optional access restrictions that the Postfix SMTP server applies in the context of the SMTP END-OF-DATA command. See SMTPD_ACCESS_README, section "Delayed evaluation of SMTP access restriction lists" for a discussion of evaluation context and time.
This feature is available in Postfix 2.2 and later.
See smtpd_data_restrictions for details and limitations.
Mandatory TLS: announce STARTTLS support to SMTP clients, and require that clients use TLS encryption. According to RFC 2487 this MUST NOT be applied in case of a publicly-referenced SMTP server. This option is off by default and should be used only on dedicated servers.
Note 1: "smtpd_enforce_tls = yes" implies "smtpd_tls_auth_only = yes".
Note 2: when invoked via "sendmail -bs", Postfix will never offer STARTTLS due to insufficient privileges to access the server private key. This is intended behavior.
This feature is available in Postfix 2.2 and later. With Postfix 2.3 and later use smtpd_tls_security_level instead.
With Postfix version 2.1 and later: the SMTP server response delay after a client has made more than $smtpd_soft_error_limit errors, and fewer than $smtpd_hard_error_limit errors, without delivering mail.
With Postfix version 2.0 and earlier: the SMTP server delay before sending a reject (4xx or 5xx) response, when the client has made fewer than $smtpd_soft_error_limit errors without delivering mail.
Optional SMTP server access restrictions in the context of a client ETRN request. See SMTPD_ACCESS_README, section "Delayed evaluation of SMTP access restriction lists" for a discussion of evaluation context and time.
The Postfix ETRN implementation accepts only destinations that are eligible for the Postfix "fast flush" service. See the ETRN_README file for details.
Specify a list of restrictions, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace. Restrictions are applied in the order as specified; the first restriction that matches wins.
The following restrictions are specific to the domain name information received with the ETRN command.
Other restrictions that are valid in this context:
Example:
smtpd_etrn_restrictions = permit_mynetworks, reject
What characters are allowed in $name expansions of RBL reply templates. Characters not in the allowed set are replaced by "_". Use C like escapes to specify special characters such as whitespace.
This parameter is not subjected to $parameter expansion.
This feature is available in Postfix 2.0 and later.
List of commands that cause the Postfix SMTP server to immediately terminate the session with a 221 code. This can be used to disconnect clients that obviously attempt to abuse the system. In addition to the commands listed in this parameter, commands that follow the "Label:" format of message headers will also cause a disconnect.
This feature is available in Postfix 2.2 and later.
The maximal number of errors a remote SMTP client is allowed to make without delivering mail. The Postfix SMTP server disconnects when the limit is exceeded. Normally the default limit is 20, but it changes under overload to just 1. With Postfix 2.5 and earlier, the SMTP server always allows up to 20 errors by default.
Require that a remote SMTP client introduces itself with the HELO or EHLO command before sending the MAIL command or other commands that require EHLO negotiation.
Example:
smtpd_helo_required = yes
Optional restrictions that the Postfix SMTP server applies in the context of the SMTP HELO command. See SMTPD_ACCESS_README, section "Delayed evaluation of SMTP access restriction lists" for a discussion of evaluation context and time.
The default is to permit everything.
Note: specify "smtpd_helo_required = yes" to fully enforce this restriction (without "smtpd_helo_required = yes", a client can simply skip smtpd_helo_restrictions by not sending HELO or EHLO).
Specify a list of restrictions, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace. Restrictions are applied in the order as specified; the first restriction that matches wins.
The following restrictions are specific to the hostname information received with the HELO or EHLO command.
Other restrictions that are valid in this context:
Examples:
smtpd_helo_restrictions = permit_mynetworks, reject_invalid_helo_hostname smtpd_helo_restrictions = permit_mynetworks, reject_unknown_helo_hostname
The maximal number of lines in the Postfix SMTP server command history before it is flushed upon receipt of EHLO, RSET, or end of DATA.
The number of junk commands (NOOP, VRFY, ETRN or RSET) that a remote SMTP client can send before the Postfix SMTP server starts to increment the error counter with each junk command. The junk command count is reset after mail is delivered. See also the smtpd_error_sleep_time and smtpd_soft_error_limit configuration parameters. Normally the default limit is 100, but it changes under overload to just 1. With Postfix 2.5 and earlier, the SMTP server always allows up to 100 junk commands by default.
A list of Milter (mail filter) applications for new mail that arrives via the Postfix smtpd(8) server. Specify space or comma as separator. See the MILTER_README document for details.
This feature is available in Postfix 2.3 and later.
List of commands that the Postfix SMTP server replies to with "250 Ok", without doing any syntax checks and without changing state. This list overrides any commands built into the Postfix SMTP server.
The lookup key to be used in SMTP access(5) tables instead of the null sender address.
Attempt to look up the remote SMTP client hostname, and verify that the name matches the client IP address. A client name is set to "unknown" when it cannot be looked up or verified, or when name lookup is disabled. Turning off name lookup reduces delays due to DNS lookup and increases the maximal inbound delivery rate.
This feature is available in Postfix 2.3 and later.
Change the behavior of the smtpd_timeout time limit, from a time limit per read or write system call, to a time limit to send or receive a complete record (an SMTP command line, SMTP response line, SMTP message content line, or TLS protocol message). This limits the impact from hostile peers that trickle data one byte at a time.
Note: when per-record deadlines are enabled, a short timeout may cause problems with TLS over very slow network connections. The reasons are that a TLS protocol message can be up to 16 kbytes long (with TLSv1), and that an entire TLS protocol message must be sent or received within the per-record deadline.
This feature is available in Postfix 2.9 and later. With older Postfix releases, the behavior is as if this parameter is set to "no".
The time after which an idle SMTPD policy service connection is closed.
This feature is available in Postfix 2.1 and later.
The time after which an active SMTPD policy service connection is closed.
This feature is available in Postfix 2.1 and later.
The time limit for connecting to, writing to or receiving from a delegated SMTPD policy server.
This feature is available in Postfix 2.1 and later.
How the Postfix SMTP server announces itself to the proxy filter. By default, the Postfix hostname is used.
This feature is available in Postfix 2.1 and later.
The hostname and TCP port of the mail filtering proxy server. The proxy receives all mail from the Postfix SMTP server, and is supposed to give the result to another Postfix SMTP server process.
Specify "host:port" or "inet:host:port" for a TCP endpoint, or "unix:pathname" for a UNIX-domain endpoint. The host can be specified as an IP address or as a symbolic name; no MX lookups are done. When no "host" or "host:" are specified, the local machine is assumed. Pathname interpretation is relative to the Postfix queue directory.
This feature is available in Postfix 2.1 and later.
The "inet:" and "unix:" prefixes are available in Postfix 2.3 and later.
List of options that control how the Postfix SMTP server communicates with a before-queue content filter. Specify zero or more of the following, separated by comma or whitespace.
Do not connect to a before-queue content filter until an entire message has been received. This reduces the number of simultaneous before-queue content filter processes.
NOTE 1: A filter must not selectively reject recipients of a multi-recipient message. Rejecting all recipients is OK, as is accepting all recipients.
NOTE 2: This feature increases the minimum amount of free queue space by $message_size_limit. The extra space is needed to save the message to a temporary file.
This feature is available in Postfix 2.7 and later.
The time limit for connecting to a proxy filter and for sending or receiving information. When a connection fails the client gets a generic error message while more detailed information is logged to the maillog file.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
This feature is available in Postfix 2.1 and later.
The maximal number of recipients that the Postfix SMTP server accepts per message delivery request.
The number of recipients that a remote SMTP client can send in excess of the limit specified with $smtpd_recipient_limit, before the Postfix SMTP server increments the per-session error count for each excess recipient.
The access restrictions that the Postfix SMTP server applies in the context of the RCPT TO command. See SMTPD_ACCESS_README, section "Delayed evaluation of SMTP access restriction lists" for a discussion of evaluation context and time.
By default, the Postfix SMTP server accepts:
IMPORTANT: If you change this parameter setting, you must specify at least one of the following restrictions. Otherwise Postfix will refuse to receive mail:
reject, defer, defer_if_permit, reject_unauth_destination
Specify a list of restrictions, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace. Restrictions are applied in the order as specified; the first restriction that matches wins.
The following restrictions are specific to the recipient address that is received with the RCPT TO command.
Other restrictions that are valid in this context:
Example:
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
Optional information that is appended after each SMTP server 4XX or 5XX response.
Example:
/etc/postfix/main.cf:
smtpd_reject_footer = For assistance, call 800-555-0101.
Please provide the following information in your problem report:
time ($localtime), client ($client_address) and server
($server_name).
Server response:
550-5.5.1 <user@example> Recipient address rejected: User unknown
550 5.5.1 For assistance, call 800-555-0101. Please provide the
following information in your problem report: time (Jan 4 15:42:00),
client (192.168.1.248) and server (mail1.example.com).
Note: the above text is meant to make it easier to find the Postfix logfile records for a failed SMTP session. The text itself is not logged to the Postfix SMTP server's maillog file.
Be sure to keep the text as short as possible. Long text may be truncated before it is logged to the remote SMTP client's maillog file, or before it is returned to the sender in a delivery status notification.
This feature supports a limited number of $name attributes in the footer text. These are replaced by their current value for the SMTP session:
Notes:
NOT SUPPORTED are other attributes such as sender, recipient, or main.cf parameters.
For safety reasons, text that does not match $smtpd_expansion_filter is censored.
This feature supports the two-character sequence \n as a request for a line break in the footer text. Postfix automatically inserts after each line break the three-digit SMTP reply code (and optional enhanced status code) from the original Postfix reject message.
This feature is available in Postfix 2.8 and later.
Request that the Postfix SMTP server rejects mail for unknown recipient addresses, even when no explicit reject_unlisted_recipient access restriction is specified. This prevents the Postfix queue from filling up with undeliverable MAILER-DAEMON messages.
An address is always considered "known" when it matches a virtual(5) alias or a canonical(5) mapping.
This feature is available in Postfix 2.1 and later.
Request that the Postfix SMTP server rejects mail from unknown sender addresses, even when no explicit reject_unlisted_sender access restriction is specified. This can slow down an explosion of forged mail from worms or viruses.
An address is always considered "known" when it matches a virtual(5) alias or a canonical(5) mapping.
This feature is available in Postfix 2.1 and later.
User-defined aliases for groups of access restrictions. The aliases can be specified in smtpd_recipient_restrictions etc., and on the right-hand side of a Postfix access(5) table.
One major application is for implementing per-recipient UCE control. See the RESTRICTION_CLASS_README document for other examples.
The application name that the Postfix SMTP server uses for SASL server initialization. This controls the name of the SASL configuration file. The default value is smtpd, corresponding to a SASL configuration file named smtpd.conf.
This feature is available in Postfix 2.1 and 2.2. With Postfix 2.3 it was renamed to smtpd_sasl_path.
Enable SASL authentication in the Postfix SMTP server. By default, the Postfix SMTP server does not use authentication.
If a remote SMTP client is authenticated, the permit_sasl_authenticated access restriction can be used to permit relay access, like this:
smtpd_recipient_restrictions =
permit_mynetworks, permit_sasl_authenticated, ...
To reject all SMTP connections from unauthenticated clients, specify "smtpd_delay_reject = yes" (which is the default) and use:
smtpd_client_restrictions = permit_sasl_authenticated, reject
See the SASL_README file for SASL configuration and operation details.
Report the SASL authenticated user name in the smtpd(8) Received message header.
This feature is available in Postfix 2.3 and later.
What remote SMTP clients the Postfix SMTP server will not offer AUTH support to.
Some clients (Netscape 4 at least) have a bug that causes them to require a login and password whenever AUTH is offered, whether it's necessary or not. To work around this, specify, for example, $mynetworks to prevent Postfix from offering AUTH to local clients.
Specify a list of network/netmask patterns, separated by commas and/or whitespace. The mask specifies the number of bits in the network part of a host address. You can also "/file/name" or "type:table" patterns. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a table entry matches a lookup string (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude an address or network block from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
Note: IP version 6 address information must be specified inside [] in the smtpd_sasl_exceptions_networks value, and in files specified with "/file/name". IP version 6 addresses contain the ":" character, and would otherwise be confused with a "type:table" pattern.
Example:
smtpd_sasl_exceptions_networks = $mynetworks
This feature is available in Postfix 2.1 and later.
The name of the Postfix SMTP server's local SASL authentication realm.
By default, the local authentication realm name is the null string.
Examples:
smtpd_sasl_local_domain = $mydomain smtpd_sasl_local_domain = $myhostname
Implementation-specific information that the Postfix SMTP server passes through to the SASL plug-in implementation that is selected with smtpd_sasl_type. Typically this specifies the name of a configuration file or rendezvous point.
This feature is available in Postfix 2.3 and later. In earlier releases it was called smtpd_sasl_application_name.
Postfix SMTP server SASL security options; as of Postfix 2.3 the list of available features depends on the SASL server implementation that is selected with smtpd_sasl_type.
The following security features are defined for the cyrus server SASL implementation:
Restrict what authentication mechanisms the Postfix SMTP server will offer to the client. The list of available authentication mechanisms is system dependent.
Specify zero or more of the following:
By default, the Postfix SMTP server accepts plaintext passwords but not anonymous logins.
Warning: it appears that clients try authentication methods in the order as advertised by the server (e.g., PLAIN ANONYMOUS CRAM-MD5) which means that if you disable plaintext passwords, clients will log in anonymously, even when they should be able to use CRAM-MD5. So, if you disable plaintext logins, disable anonymous logins too. Postfix treats anonymous login as no authentication.
Example:
smtpd_sasl_security_options = noanonymous, noplaintext
The SASL authentication security options that the Postfix SMTP server uses for TLS encrypted SMTP sessions.
This feature is available in Postfix 2.2 and later.
The SASL plug-in type that the Postfix SMTP server should use for authentication. The available types are listed with the "postconf -a" command.
This feature is available in Postfix 2.3 and later.
Optional lookup table with the SASL login names that own sender (MAIL FROM) addresses.
Specify zero or more "type:table" lookup tables. With lookups from indexed files such as DB or DBM, or from networked tables such as NIS, LDAP or SQL, the following search operations are done with a sender address of user@domain:
In all cases the result of table lookup must be either "not found" or a list of SASL login names separated by comma and/or whitespace.
Optional restrictions that the Postfix SMTP server applies in the context of the MAIL FROM command. See SMTPD_ACCESS_README, section "Delayed evaluation of SMTP access restriction lists" for a discussion of evaluation context and time.
The default is to permit everything.
Specify a list of restrictions, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace. Restrictions are applied in the order as specified; the first restriction that matches wins.
The following restrictions are specific to the sender address received with the MAIL FROM command.
Other restrictions that are valid in this context:
Examples:
smtpd_sender_restrictions = reject_unknown_sender_domain
smtpd_sender_restrictions = reject_unknown_sender_domain,
check_sender_access hash:/etc/postfix/access
The internal service that postscreen(8) forwards allowed connections to. In a future version there may be different classes of SMTP service.
This feature is available in Postfix 2.8.
The number of errors a remote SMTP client is allowed to make without delivering mail before the Postfix SMTP server slows down all its responses.
With Postfix version 2.1 and later, the Postfix SMTP server delays all responses by $smtpd_error_sleep_time seconds.
With Postfix versions 2.0 and earlier, the Postfix SMTP server delays all responses by (number of errors) seconds.
The time limit for Postfix SMTP server write and read operations during TLS startup and shutdown handshake procedures. The current default value is stress-dependent. Before Postfix version 2.8, it was fixed at 300s.
This feature is available in Postfix 2.2 and later.
The time limit for sending a Postfix SMTP server response and for receiving a remote SMTP client request. Normally the default limit is 300s, but it changes under overload to just 10s. With Postfix 2.5 and earlier, the SMTP server always uses a time limit of 300s by default.
Note: if you set SMTP time limits to very large values you may have to update the global ipc_timeout parameter.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
A file containing (PEM format) CA certificates of root CAs trusted to sign either remote SMTP client certificates or intermediate CA certificates. These are loaded into memory before the smtpd(8) server enters the chroot jail. If the number of trusted roots is large, consider using smtpd_tls_CApath instead, but note that the latter directory must be present in the chroot jail if the smtpd(8) server is chrooted. This file may also be used to augment the server certificate trust chain, but it is best to include all the required certificates directly in the server certificate file.
Specify "tls_append_default_CA = no" to prevent Postfix from appending the system-supplied default CAs and trusting third-party certificates.
By default (see smtpd_tls_ask_ccert), client certificates are not requested, and smtpd_tls_CAfile should remain empty. If you do make use of client certificates, the distinguished names (DNs) of the certificate authorities listed in smtpd_tls_CAfile are sent to the remote SMTP client in the client certificate request message. MUAs with multiple client certificates may use the list of preferred certificate authorities to select the correct client certificate. You may want to put your "preferred" CA or CAs in this file, and install other trusted CAs in $smtpd_tls_CApath.
Example:
smtpd_tls_CAfile = /etc/postfix/CAcert.pem
This feature is available in Postfix 2.2 and later.
A directory containing (PEM format) CA certificates of root CAs trusted to sign either remote SMTP client certificates or intermediate CA certificates. Do not forget to create the necessary "hash" links with, for example, "$OPENSSL_HOME/bin/c_rehash /etc/postfix/certs". To use smtpd_tls_CApath in chroot mode, this directory (or a copy) must be inside the chroot jail.
Specify "tls_append_default_CA = no" to prevent Postfix from appending the system-supplied default CAs and trusting third-party certificates.
By default (see smtpd_tls_ask_ccert), client certificates are not requested, and smtpd_tls_CApath should remain empty. In contrast to smtpd_tls_CAfile, DNs of certificate authorities installed in $smtpd_tls_CApath are not included in the client certificate request message. MUAs with multiple client certificates may use the list of preferred certificate authorities to select the correct client certificate. You may want to put your "preferred" CA or CAs in $smtpd_tls_CAfile, and install the remaining trusted CAs in $smtpd_tls_CApath.
Example:
smtpd_tls_CApath = /etc/postfix/certs
This feature is available in Postfix 2.2 and later.
Force the Postfix SMTP server to issue a TLS session id, even when TLS session caching is turned off (smtpd_tls_session_cache_database is empty). This behavior is compatible with Postfix < 2.3.
With Postfix 2.3 and later the Postfix SMTP server can disable session id generation when TLS session caching is turned off. This keeps clients from caching sessions that almost certainly cannot be re-used.
By default, the Postfix SMTP server always generates TLS session ids. This works around a known defect in mail client applications such as MS Outlook, and may also prevent interoperability issues with other MTAs.
Example:
smtpd_tls_always_issue_session_ids = no
This feature is available in Postfix 2.3 and later.
Ask a remote SMTP client for a client certificate. This information is needed for certificate based mail relaying with, for example, the permit_tls_clientcerts feature.
Some clients such as Netscape will either complain if no certificate is available (for the list of CAs in $smtpd_tls_CAfile) or will offer multiple client certificates to choose from. This may be annoying, so this option is "off" by default.
This feature is available in Postfix 2.2 and later.
When TLS encryption is optional in the Postfix SMTP server, do not announce or accept SASL authentication over unencrypted connections.
This feature is available in Postfix 2.2 and later.
The verification depth for remote SMTP client certificates. A depth of 1 is sufficient if the issuing CA is listed in a local CA file.
The default verification depth is 9 (the OpenSSL default) for compatibility with earlier Postfix behavior. Prior to Postfix 2.5, the default value was 5, but the limit was not actually enforced. If you have set this to a lower non-default value, certificates with longer trust chains may now fail to verify. Certificate chains with 1 or 2 CAs are common, deeper chains are more rare and any number between 5 and 9 should suffice in practice. You can choose a lower number if, for example, you trust certificates directly signed by an issuing CA but not any CAs it delegates to.
This feature is available in Postfix 2.2 and later.
File with the Postfix SMTP server RSA certificate in PEM format. This file may also contain the Postfix SMTP server private RSA key.
Public Internet MX hosts without certificates signed by a "reputable" CA must generate, and be prepared to present to most clients, a self-signed or private-CA signed certificate. The client will not be able to authenticate the server, but unless it is running Postfix 2.3 or similar software, it will still insist on a server certificate.
For servers that are not public Internet MX hosts, Postfix 2.3 supports configurations with no certificates. This entails the use of just the anonymous TLS ciphers, which are not supported by typical SMTP clients. Since such clients will not, as a rule, fall back to plain text after a TLS handshake failure, the server will be unable to receive email from TLS enabled clients. To avoid accidental configurations with no certificates, Postfix 2.3 enables certificate-less operation only when the administrator explicitly sets "smtpd_tls_cert_file = none". This ensures that new Postfix configurations will not accidentally run with no certificates.
Both RSA and DSA certificates are supported. When both types are present, the cipher used determines which certificate will be presented to the client. For Netscape and OpenSSL clients without special cipher choices the RSA certificate is preferred.
To enable a remote SMTP client to verify the Postfix SMTP server certificate, the issuing CA certificates must be made available to the client. You should include the required certificates in the server certificate file, the server certificate first, then the issuing CA(s) (bottom-up order).
Example: the certificate for "server.example.com" was issued by "intermediate CA" which itself has a certificate of "root CA". Create the server.pem file with "cat server_cert.pem intermediate_CA.pem root_CA.pem > server.pem".
If you also want to verify client certificates issued by these CAs, you can add the CA certificates to the smtpd_tls_CAfile, in which case it is not necessary to have them in the smtpd_tls_cert_file or smtpd_tls_dcert_file.
A certificate supplied here must be usable as an SSL server certificate and hence pass the "openssl verify -purpose sslserver ..." test.
Example:
smtpd_tls_cert_file = /etc/postfix/server.pem
This feature is available in Postfix 2.2 and later.
Obsolete Postfix < 2.3 control for the Postfix SMTP server TLS cipher list. It is easy to create inter-operability problems by choosing a non-default cipher list. Do not use a non-default TLS cipherlist for MX hosts on the public Internet. Clients that begin the TLS handshake, but are unable to agree on a common cipher, may not be able to send any email to the SMTP server. Using a restricted cipher list may be more appropriate for a dedicated MSA or an internal mailhub, where one can exert some control over the TLS software and settings of the connecting clients.
Note: do not use "" quotes around the parameter value.
This feature is available with Postfix version 2.2. It is not used with Postfix 2.3 and later; use smtpd_tls_mandatory_ciphers instead.
The minimum TLS cipher grade that the Postfix SMTP server will use with opportunistic TLS encryption. Cipher types listed in smtpd_tls_exclude_ciphers are excluded from the base definition of the selected cipher grade. The default value "export" ensures maximum inter-operability. Because encryption is optional, stronger controls are not appropriate, and this setting SHOULD NOT be changed unless the change is essential.
When TLS is mandatory the cipher grade is chosen via the smtpd_tls_mandatory_ciphers configuration parameter, see there for syntax details.
Example:
smtpd_tls_ciphers = export
This feature is available in Postfix 2.6 and later. With earlier Postfix releases only the smtpd_tls_mandatory_ciphers parameter is implemented, and opportunistic TLS always uses "export" or better (i.e. all) ciphers.
File with the Postfix SMTP server DSA certificate in PEM format. This file may also contain the Postfix SMTP server private DSA key.
See the discussion under smtpd_tls_cert_file for more details.
Example:
smtpd_tls_dcert_file = /etc/postfix/server-dsa.pem
This feature is available in Postfix 2.2 and later.
File with DH parameters that the Postfix SMTP server should use with EDH ciphers.
Instead of using the exact same parameter sets as distributed with other TLS packages, it is more secure to generate your own set of parameters with something like the following command:
openssl gendh -out /etc/postfix/dh_1024.pem -2 1024
Your actual source for entropy may differ. Some systems have /dev/random; on other system you may consider using the "Entropy Gathering Daemon EGD", available at http://egd.sourceforge.net/
Example:
smtpd_tls_dh1024_param_file = /etc/postfix/dh_1024.pem
This feature is available with Postfix version 2.2.
File with DH parameters that the Postfix SMTP server should use with EDH ciphers.
See also the discussion under the smtpd_tls_dh1024_param_file configuration parameter.
Example:
smtpd_tls_dh512_param_file = /etc/postfix/dh_512.pem
This feature is available with Postfix version 2.2.
File with the Postfix SMTP server DSA private key in PEM format. This file may be combined with the Postfix SMTP server DSA certificate file specified with $smtpd_tls_dcert_file.
The private key must be accessible without a pass-phrase, i.e. it must not be encrypted. File permissions should grant read-only access to the system superuser account ("root"), and no access to anyone else.
This feature is available in Postfix 2.2 and later.
File with the Postfix SMTP server ECDSA certificate in PEM format. This file may also contain the Postfix SMTP server private ECDSA key.
See the discussion under smtpd_tls_cert_file for more details.
Example:
smtpd_tls_eccert_file = /etc/postfix/ecdsa-scert.pem
This feature is available in Postfix 2.6 and later, when Postfix is compiled and linked with OpenSSL 1.0.0 or later.
File with the Postfix SMTP server ECDSA private key in PEM format. This file may be combined with the Postfix SMTP server ECDSA certificate file specified with $smtpd_tls_eccert_file.
The private key must be accessible without a pass-phrase, i.e. it must not be encrypted. File permissions should grant read-only access to the system superuser account ("root"), and no access to anyone else.
This feature is available in Postfix 2.6 and later, when Postfix is compiled and linked with OpenSSL 1.0.0 or later.
The Postfix SMTP server security grade for ephemeral elliptic-curve Diffie-Hellman (EECDH) key exchange.
The available choices are:
This feature is available in Postfix 2.6 and later, when it is compiled and linked with OpenSSL 1.0.0 or later.
List of ciphers or cipher types to exclude from the SMTP server cipher list at all TLS security levels. Excluding valid ciphers can create interoperability problems. DO NOT exclude ciphers unless it is essential to do so. This is not an OpenSSL cipherlist; it is a simple list separated by whitespace and/or commas. The elements are a single cipher, or one or more "+" separated cipher properties, in which case only ciphers matching all the properties are excluded.
Examples (some of these will cause problems):
smtpd_tls_exclude_ciphers = aNULL smtpd_tls_exclude_ciphers = MD5, DES smtpd_tls_exclude_ciphers = DES+MD5 smtpd_tls_exclude_ciphers = AES256-SHA, DES-CBC3-MD5 smtpd_tls_exclude_ciphers = kEDH+aRSA
The first setting disables anonymous ciphers. The next setting disables ciphers that use the MD5 digest algorithm or the (single) DES encryption algorithm. The next setting disables ciphers that use MD5 and DES together. The next setting disables the two ciphers "AES256-SHA" and "DES-CBC3-MD5". The last setting disables ciphers that use "EDH" key exchange with RSA authentication.
This feature is available in Postfix 2.3 and later.
The message digest algorithm used to construct client-certificate fingerprints for check_ccert_access and permit_tls_clientcerts. The default algorithm is md5, for backwards compatibility with Postfix releases prior to 2.5.
The best practice algorithm is now sha1. Recent advances in hash function cryptanalysis have led to md5 being deprecated in favor of sha1. However, as long as there are no known "second pre-image" attacks against md5, its use in this context can still be considered safe.
While additional digest algorithms are often available with OpenSSL's libcrypto, only those used by libssl in SSL cipher suites are available to Postfix. For now this means just md5 or sha1.
To find the fingerprint of a specific certificate file, with a specific digest algorithm, run:
$ openssl x509 -noout -fingerprint -digest -in certfile.pem
The text to the right of "=" sign is the desired fingerprint. For example:
$ openssl x509 -noout -fingerprint -sha1 -in cert.pem SHA1 Fingerprint=D4:6A:AB:19:24:79:F8:32:BB:A6:CB:66:82:C0:8E:9B:EE:29:A8:1A
Example: client-certificate access table, with sha1 fingerprints:
/etc/postfix/main.cf: smtpd_tls_fingerprint_digest = sha1 smtpd_client_restrictions = check_ccert_access hash:/etc/postfix/access, reject/etc/postfix/access: # Action folded to next line... AF:88:7C:AD:51:95:6F:36:96:F6:01:FB:2E:48:CD:AB:49:25:A2:3B OK 85:16:78:FD:73:6E:CE:70:E0:31:5F:0D:3C:C8:6D:C4:2C:24:59:E1 permit_auth_destination
This feature is available in Postfix 2.5 and later.
File with the Postfix SMTP server RSA private key in PEM format. This file may be combined with the Postfix SMTP server RSA certificate file specified with $smtpd_tls_cert_file.
The private key must be accessible without a pass-phrase, i.e. it must not be encrypted. File permissions should grant read-only access to the system superuser account ("root"), and no access to anyone else.
Enable additional Postfix SMTP server logging of TLS activity. Each logging level also includes the information that is logged at a lower logging level.
Use "smtpd_tls_loglevel = 3" only in case of problems. Use of loglevel 4 is strongly discouraged.
This feature is available in Postfix 2.2 and later.
The minimum TLS cipher grade that the Postfix SMTP server will use with mandatory TLS encryption. The default grade ("medium") is sufficiently strong that any benefit from globally restricting TLS sessions to a more stringent grade is likely negligible, especially given the fact that many implementations still do not offer any stronger ("high" grade) ciphers, while those that do, will always use "high" grade ciphers. So insisting on "high" grade ciphers is generally counter-productive. Allowing "export" or "low" ciphers is typically not a good idea, as systems limited to just these are limited to obsolete browsers. No known SMTP clients fail to support at least one "medium" or "high" grade cipher.
The following cipher grades are supported:
Cipher types listed in smtpd_tls_mandatory_exclude_ciphers or smtpd_tls_exclude_ciphers are excluded from the base definition of the selected cipher grade. See smtpd_tls_ciphers for cipher controls that apply to opportunistic TLS.
The underlying cipherlists for grades other than "null" include anonymous ciphers, but these are automatically filtered out if the server is configured to ask for client certificates. You are very unlikely to need to take any steps to exclude anonymous ciphers, they are excluded automatically as required. If you must exclude anonymous ciphers even when Postfix does not need or use peer certificates, set "smtpd_tls_exclude_ciphers = aNULL". To exclude anonymous ciphers only when TLS is enforced, set "smtpd_tls_mandatory_exclude_ciphers = aNULL".
This feature is available in Postfix 2.3 and later.
Additional list of ciphers or cipher types to exclude from the SMTP server cipher list at mandatory TLS security levels. This list works in addition to the exclusions listed with smtpd_tls_exclude_ciphers (see there for syntax details).
This feature is available in Postfix 2.3 and later.
The SSL/TLS protocols accepted by the Postfix SMTP server with mandatory TLS encryption. If the list is empty, the server supports all available SSL/TLS protocol versions. A non-empty value is a list of protocol names separated by whitespace, commas or colons. The supported protocol names are "SSLv2", "SSLv3" and "TLSv1", and are not case sensitive.
With Postfix ≥ 2.5 the parameter syntax is expanded to support protocol exclusions. One can now explicitly exclude SSLv2 by setting "smtpd_tls_mandatory_protocols = !SSLv2". To exclude both SSLv2 and SSLv3 set "smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3". Listing the protocols to include, rather than protocols to exclude, is still supported, use the form you find more intuitive.
Since SSL version 2 has known protocol weaknesses and is now deprecated, the default setting excludes "SSLv2". This means that by default, SSL version 2 will not be used at the "encrypt" security level.
Example:
smtpd_tls_mandatory_protocols = TLSv1 # Alternative form with Postfix ≥ 2.5: smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3
This feature is available in Postfix 2.3 and later.
List of TLS protocols that the Postfix SMTP server will exclude or include with opportunistic TLS encryption. This parameter SHOULD be left at its default empty value, allowing all protocols to be used with opportunistic TLS.
In main.cf the values are separated by whitespace, commas or colons. An empty value means allow all protocols. The valid protocol names, (see SSL_get_version(3)), are "SSLv2", "SSLv3" and "TLSv1". In smtp_tls_policy_maps table entries, "protocols" attribute values are separated by a colon.
To include a protocol list its name, to exclude it, prefix the name with a "!" character. To exclude SSLv2 even for opportunistic TLS set "smtpd_tls_protocols = !SSLv2". To exclude both "SSLv2" and "SSLv3" set "smtpd_tls_protocols = !SSLv2, !SSLv3". Explicitly listing the protocols to include, is supported, but not recommended. OpenSSL provides no mechanisms for excluding protocols not known at compile-time. If Postfix is linked against an OpenSSL library that supports additional protocol versions, they cannot be excluded using either syntax.
Example:
smtpd_tls_protocols = !SSLv2
This feature is available in Postfix 2.6 and later.
Request that the Postfix SMTP server produces Received: message headers that include information about the protocol and cipher used, as well as the client CommonName and client certificate issuer CommonName. This is disabled by default, as the information may be modified in transit through other mail servers. Only information that was recorded by the final destination can be trusted.
This feature is available in Postfix 2.2 and later.
With mandatory TLS encryption, require a trusted remote SMTP client certificate in order to allow TLS connections to proceed. This option implies "smtpd_tls_ask_ccert = yes".
When TLS encryption is optional, this setting is ignored with a warning written to the mail log.
This feature is available in Postfix 2.2 and later.
The SMTP TLS security level for the Postfix SMTP server; when a non-empty value is specified, this overrides the obsolete parameters smtpd_use_tls and smtpd_enforce_tls. This parameter is ignored with "smtpd_tls_wrappermode = yes".
Specify one of the following security levels:
Note 1: the "fingerprint", "verify" and "secure" levels are not supported here. The Postfix SMTP server logs a warning and uses "encrypt" instead. To verify SMTP client certificates, see TLS_README for a discussion of the smtpd_tls_ask_ccert, smtpd_tls_req_ccert, and permit_tls_clientcerts features.
Note 2: The parameter setting "smtpd_tls_security_level = encrypt" implies "smtpd_tls_auth_only = yes".
Note 3: when invoked via "sendmail -bs", Postfix will never offer STARTTLS due to insufficient privileges to access the server private key. This is intended behavior.
This feature is available in Postfix 2.3 and later.
Name of the file containing the optional Postfix SMTP server TLS session cache. Specify a database type that supports enumeration, such as btree or sdbm; there is no need to support concurrent access. The file is created if it does not exist. The smtpd(8) daemon does not use this parameter directly, rather the cache is implemented indirectly in the tlsmgr(8) daemon. This means that per-smtpd-instance master.cf overrides of this parameter are not effective. Note, that each of the cache databases supported by tlsmgr(8) daemon: $smtpd_tls_session_cache_database, $smtp_tls_session_cache_database (and with Postfix 2.3 and later $lmtp_tls_session_cache_database), needs to be stored separately. It is not at this time possible to store multiple caches in a single database.
Note: dbm databases are not suitable. TLS session objects are too large.
As of version 2.5, Postfix no longer uses root privileges when opening this file. The file should now be stored under the Postfix-owned data_directory. As a migration aid, an attempt to open the file under a non-Postfix directory is redirected to the Postfix-owned data_directory, and a warning is logged.
Example:
smtpd_tls_session_cache_database = btree:/var/lib/postfix/smtpd_scache
This feature is available in Postfix 2.2 and later.
The expiration time of Postfix SMTP server TLS session cache information. A cache cleanup is performed periodically every $smtpd_tls_session_cache_timeout seconds. As with $smtpd_tls_session_cache_database, this parameter is implemented in the tlsmgr(8) daemon and therefore per-smtpd-instance master.cf overrides are not possible.
This feature is available in Postfix 2.2 and later.
Run the Postfix SMTP server in the non-standard "wrapper" mode, instead of using the STARTTLS command.
If you want to support this service, enable a special port in master.cf, and specify "-o smtpd_tls_wrappermode=yes" on the SMTP server's command line. Port 465 (smtps) was once chosen for this purpose.
This feature is available in Postfix 2.2 and later.
Opportunistic TLS: announce STARTTLS support to SMTP clients, but do not require that clients use TLS encryption.
Note: when invoked via "sendmail -bs", Postfix will never offer STARTTLS due to insufficient privileges to access the server private key. This is intended behavior.
This feature is available in Postfix 2.2 and later. With Postfix 2.3 and later use smtpd_tls_security_level instead.
Safety net to keep mail queued that would otherwise be returned to the sender. This parameter disables locally-generated bounces, and prevents the Postfix SMTP server from rejecting mail permanently, by changing 5xx reply codes into 4xx. However, soft_bounce is no cure for address rewriting mistakes or mail routing mistakes.
Example:
soft_bounce = yes
The time after which a stale exclusive mailbox lockfile is removed. This is used for delivery to file or mailbox.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
This feature is documented in the STRESS_README document.
This feature is available in Postfix 2.5 and later.
Reject mail with 8-bit text in message headers. This blocks mail from poorly written applications.
This feature should not be enabled on a general purpose mail server, because it is likely to reject legitimate email.
This feature is available in Postfix 2.0 and later.
Enable both strict_7bit_headers and strict_8bitmime_body.
This feature should not be enabled on a general purpose mail server, because it is likely to reject legitimate email.
This feature is available in Postfix 2.0 and later.
Reject 8-bit message body text without 8-bit MIME content encoding information. This blocks mail from poorly written applications.
Unfortunately, this also rejects majordomo approval requests when the included request contains valid 8-bit MIME mail, and it rejects bounces from mailers that do not MIME encapsulate 8-bit content (for example, bounces from qmail or from old versions of Postfix).
This feature should not be enabled on a general purpose mail server, because it is likely to reject legitimate email.
This feature is available in Postfix 2.0 and later.
Defer delivery when a mailbox file is not owned by its recipient. The default setting is not backwards compatible.
This feature is available in Postfix 2.5.3 and later.
Reject mail with invalid Content-Transfer-Encoding: information for the message/* or multipart/* MIME content types. This blocks mail from poorly written software.
This feature should not be enabled on a general purpose mail server, because it will reject mail after a single violation.
This feature is available in Postfix 2.0 and later.
Require that addresses received in SMTP MAIL FROM and RCPT TO commands are enclosed with <>, and that those addresses do not contain RFC 822 style comments or phrases. This stops mail from poorly written software.
By default, the Postfix SMTP server accepts RFC 822 syntax in MAIL FROM and RCPT TO addresses.
Obsolete SUN mailtool compatibility feature. Instead, use "mailbox_delivery_lock = dotlock".
Enable the rewriting of "site!user" into "user@site". This is necessary if your machine is connected to UUCP networks. It is enabled by default.
Note: with Postfix version 2.2, message header address rewriting happens only when one of the following conditions is true:
To get the behavior before Postfix version 2.2, specify "local_header_rewrite_clients = static:all".
Example:
swap_bangpath = no
The syslog facility of Postfix logging. Specify a facility as defined in syslog.conf(5). The default facility is "mail".
Warning: a non-default syslog_facility setting takes effect only after a Postfix process has completed initialization. Errors during process initialization will be logged with the default facility. Examples are errors while parsing the command line arguments, and errors while accessing the Postfix main.cf configuration file.
The mail system name that is prepended to the process name in syslog records, so that "smtpd" becomes, for example, "postfix/smtpd".
Warning: a non-default syslog_name setting takes effect only after a Postfix process has completed initialization. Errors during process initialization will be logged with the default name. Examples are errors while parsing the command line arguments, and errors while accessing the Postfix main.cf configuration file.
An optional workaround for routers that break TCP window scaling. Specify a value > 0 and < 65536 to enable this feature. With Postfix TCP servers (smtpd(8), qmqpd(8)), this feature is implemented by the Postfix master(8) daemon.
To change this parameter without stopping Postfix, you need to first terminate all Postfix TCP servers:
# postconf -e master_service_disable=inet # postfix reload
This immediately terminates all processes that accept network connections. Next, you enable Postfix TCP servers with the updated tcp_windowsize setting:
# postconf -e tcp_windowsize=65535 master_service_disable= # postfix reload
If you skip these steps with a running Postfix system, then the tcp_windowsize change will work only for Postfix TCP clients (smtp(8), lmtp(8)).
This feature is available in Postfix 2.6 and later.
Append the system-supplied default certificate authority certificates to the ones specified with *_tls_CApath or *_tls_CAfile. The default is "no"; this prevents Postfix from trusting third-party certificates and giving them relay permission with permit_tls_all_clientcerts.
This feature is available in Postfix 2.4.15, 2.5.11, 2.6.8, 2.7.2 and later versions. Specify "tls_append_default_CA = yes" for backwards compatibility, to avoid breaking certificate verification with sites that don't use permit_tls_all_clientcerts.
The number of pseudo-random bytes that an smtp(8) or smtpd(8) process requests from the tlsmgr(8) server in order to seed its internal pseudo random number generator (PRNG). The default of 32 bytes (equivalent to 256 bits) is sufficient to generate a 128bit (or 168bit) session key.
This feature is available in Postfix 2.2 and later.
List or bit-mask of OpenSSL bug work-arounds to disable.
The OpenSSL toolkit includes a set of work-arounds for buggy SSL/TLS implementations. Applications, such as Postfix, that want to maximize interoperability ask the OpenSSL library to enable the full set of recommended work-arounds.
From time to time, it is discovered that a work-around creates a security issue, and should no longer be used. If upgrading OpenSSL to a fixed version is not an option or an upgrade is not available in a timely manner, or in closed environments where no buggy clients or servers exist, it may be appropriate to disable some or all of the OpenSSL interoperability work-arounds. This parameter specifies which bug work-arounds to disable.
If the value of the parameter is a hexadecimal long integer starting with "0x", the bug work-arounds corresponding to the bits specified in its value are removed from the SSL_OP_ALL work-around bit-mask (see openssl/ssl.h and SSL_CTX_set_options(3)). You can specify more bits than are present in SSL_OP_ALL, excess bits are ignored. Specifying 0xFFFFFFFF disables all bug-workarounds on a 32-bit system. This should also be sufficient on 64-bit systems, until OpenSSL abandons support for 32-bit systems and starts using the high 32 bits of a 64-bit bug-workaround mask.
Otherwise, the parameter is a white-space or comma separated list of specific named bug work-arounds chosen from the list below. It is possible that your OpenSSL version includes new bug work-arounds added after your Postfix source code was last updated, in that case you can only disable one of these via the hexadecimal syntax above.
This feature is available in Postfix 2.8 and later.
The elliptic curve used by the SMTP server for sensibly strong ephemeral ECDH key exchange. This curve is used by the Postfix SMTP server when "smtpd_tls_eecdh_grade = strong". The phrase "sensibly strong" means approximately 128-bit security based on best known attacks. The selected curve must be implemented by OpenSSL (as reported by ecparam(1) with the "-list_curves" option) and be one of the curves listed in Section 5.1.1 of RFC 4492. You should not generally change this setting.
This default curve is specified in NSA "Suite B" Cryptography (see http://www.nsa.gov/ia/industry/crypto_suite_b.cfm) for information classified as SECRET.
Note: elliptic curve names are poorly standardized; different standards groups are assigning different names to the same underlying curves. The curve with the X9.62 name "prime256v1" is also known under the SECG name "secp256r1", but OpenSSL does not recognize the latter name.
This feature is available in Postfix 2.6 and later, when it is compiled and linked with OpenSSL 1.0.0 or later.
The elliptic curve used by the SMTP server for maximally strong ephemeral ECDH key exchange. This curve is used by the Postfix SMTP server when "smtpd_tls_eecdh_grade = ultra". The phrase "maximally strong" means approximately 192-bit security based on best known attacks. This additional strength comes at a significant computational cost, most users should instead set "smtpd_tls_eecdh_grade = strong". The selected curve must be implemented by OpenSSL (as reported by ecparam(1) with the "-list_curves" option) and be one of the curves listed in Section 5.1.1 of RFC 4492. You should not generally change this setting.
This default "ultra" curve is specified in NSA "Suite B" Cryptography (see http://www.nsa.gov/ia/industry/crypto_suite_b.cfm) for information classified as TOP SECRET.
This feature is available in Postfix 2.6 and later, when it is compiled and linked with OpenSSL 1.0.0 or later.
The OpenSSL cipherlist for "EXPORT" or higher grade ciphers. This defines the meaning of the "export" setting in smtpd_tls_mandatory_ciphers, smtp_tls_mandatory_ciphers and lmtp_tls_mandatory_ciphers. This is the cipherlist for the opportunistic ("may") TLS client security level and is the default cipherlist for the SMTP server. You are strongly encouraged to not change this setting. With OpenSSL 1.0.0 and later the cipherlist may start with an "aNULL:" prefix, which restores the 0.9.8-compatible ordering of the aNULL ciphers to the top of the list when they are enabled. This prefix is not needed with previous OpenSSL releases.
This feature is available in Postfix 2.3 and later.
The OpenSSL cipherlist for "HIGH" grade ciphers. This defines the meaning of the "high" setting in smtpd_tls_mandatory_ciphers, smtp_tls_mandatory_ciphers and lmtp_tls_mandatory_ciphers. You are strongly encouraged to not change this setting. With OpenSSL 1.0.0 and later the cipherlist may start with an "aNULL:" prefix, which restores the 0.9.8-compatible ordering of the aNULL ciphers to the top of the list when they are enabled. This prefix is not needed with previous OpenSSL releases.
This feature is available in Postfix 2.3 and later.
The OpenSSL cipherlist for "LOW" or higher grade ciphers. This defines the meaning of the "low" setting in smtpd_tls_mandatory_ciphers, smtp_tls_mandatory_ciphers and lmtp_tls_mandatory_ciphers. You are strongly encouraged to not change this setting. With OpenSSL 1.0.0 and later the cipherlist may start with an "aNULL:" prefix, which restores the 0.9.8-compatible ordering of the aNULL ciphers to the top of the list when they are enabled. This prefix is not needed with previous OpenSSL releases.
This feature is available in Postfix 2.3 and later.
The OpenSSL cipherlist for "MEDIUM" or higher grade ciphers. This defines the meaning of the "medium" setting in smtpd_tls_mandatory_ciphers, smtp_tls_mandatory_ciphers and lmtp_tls_mandatory_ciphers. This is the default cipherlist for mandatory TLS encryption in the TLS client (with anonymous ciphers disabled when verifying server certificates). You are strongly encouraged to not change this setting. With OpenSSL 1.0.0 and later the cipherlist may start with an "aNULL:" prefix, which restores the 0.9.8-compatible ordering of the aNULL ciphers to the top of the list when they are enabled. This prefix is not needed with previous OpenSSL releases.
This feature is available in Postfix 2.3 and later.
The OpenSSL cipherlist for "NULL" grade ciphers that provide authentication without encryption. This defines the meaning of the "null" setting in smtpd_mandatory_tls_ciphers, smtp_tls_mandatory_ciphers and lmtp_tls_mandatory_ciphers. You are strongly encouraged to not change this setting.
This feature is available in Postfix 2.3 and later.
With SSLv3 and later, use the server's cipher preference order instead of the client's cipher preference order.
By default, the OpenSSL server selects the client's most preferred cipher that the server supports. With SSLv3 and later, the server may choose its own most preferred cipher that is supported (offered) by the client. Setting "tls_preempt_cipherlist = yes" enables server cipher preferences.
While server cipher selection may in some cases lead to a more secure or performant cipher choice, there is some risk of interoperability issues. In the past, some SSL clients have listed lower priority ciphers that they did not implement correctly. If the server chooses a cipher that the client prefers less, it may select a cipher whose client implementation is flawed.
This feature is available in Postfix 2.8 and later, in combination with OpenSSL 0.9.7 and later.
The number of bytes that tlsmgr(8) reads from $tls_random_source when (re)seeding the in-memory pseudo random number generator (PRNG) pool. The default of 32 bytes (256 bits) is good enough for 128bit symmetric keys. If using EGD or a device file, a maximum of 255 bytes is read.
This feature is available in Postfix 2.2 and later.
Name of the pseudo random number generator (PRNG) state file that is maintained by tlsmgr(8). The file is created when it does not exist, and its length is fixed at 1024 bytes.
As of version 2.5, Postfix no longer uses root privileges when opening this file, and the default file location was changed from ${config_directory}/prng_exch to ${data_directory}/prng_exch. As a migration aid, an attempt to open the file under a non-Postfix directory is redirected to the Postfix-owned data_directory, and a warning is logged.
This feature is available in Postfix 2.2 and later.
The time between attempts by tlsmgr(8) to save the state of the pseudo random number generator (PRNG) to the file specified with $tls_random_exchange_name.
This feature is available in Postfix 2.2 and later.
The maximal time between attempts by tlsmgr(8) to re-seed the in-memory pseudo random number generator (PRNG) pool from external sources. The actual time between re-seeding attempts is calculated using the PRNG, and is between 0 and the time specified.
This feature is available in Postfix 2.2 and later.
The external entropy source for the in-memory tlsmgr(8) pseudo random number generator (PRNG) pool. Be sure to specify a non-blocking source. If this source is not a regular file, the entropy source type must be prepended: egd:/path/to/egd_socket for a source with EGD compatible socket interface, or dev:/path/to/device for a device file.
Note: on OpenBSD systems specify /dev/arandom when /dev/urandom gives timeout errors.
This feature is available in Postfix 2.2 and later.
Mandatory TLS: announce STARTTLS support to SMTP clients, and require that clients use TLS encryption. See smtpd_enforce_tls for further details.
This feature is available in Postfix 2.8 and later.
The name of the tlsproxy(8) service entry in master.cf. This service performs plaintext <=> TLS ciphertext conversion.
This feature is available in Postfix 2.8 and later.
A file containing (PEM format) CA certificates of root CAs trusted to sign either remote SMTP client certificates or intermediate CA certificates. See smtpd_tls_CAfile for further details.
This feature is available in Postfix 2.8 and later.
A directory containing (PEM format) CA certificates of root CAs trusted to sign either remote SMTP client certificates or intermediate CA certificates. See smtpd_tls_CApath for further details.
This feature is available in Postfix 2.8 and later.
Force the Postfix tlsproxy(8) server to issue a TLS session id, even when TLS session caching is turned off. See smtpd_tls_always_issue_session_ids for further details.
This feature is available in Postfix 2.8 and later.
Ask a remote SMTP client for a client certificate. See smtpd_tls_ask_ccert for further details.
This feature is available in Postfix 2.8 and later.
The verification depth for remote SMTP client certificates. A depth of 1 is sufficient if the issuing CA is listed in a local CA file. See smtpd_tls_ccert_verifydepth for further details.
This feature is available in Postfix 2.8 and later.
File with the Postfix tlsproxy(8) server RSA certificate in PEM format. This file may also contain the Postfix tlsproxy(8) server private RSA key. See smtpd_tls_cert_file for further details.
This feature is available in Postfix 2.8 and later.
The minimum TLS cipher grade that the Postfix tlsproxy(8) server will use with opportunistic TLS encryption. See smtpd_tls_ciphers for further details.
This feature is available in Postfix 2.8 and later.
File with the Postfix tlsproxy(8) server DSA certificate in PEM format. This file may also contain the Postfix tlsproxy(8) server private DSA key. See smtpd_tls_dcert_file for further details.
This feature is available in Postfix 2.8 and later.
File with DH parameters that the Postfix tlsproxy(8) server should use with EDH ciphers. See smtpd_tls_dh1024_param_file for further details.
This feature is available in Postfix 2.8 and later.
File with DH parameters that the Postfix tlsproxy(8) server should use with EDH ciphers. See smtpd_tls_dh512_param_file for further details.
This feature is available in Postfix 2.8 and later.
File with the Postfix tlsproxy(8) server DSA private key in PEM format. This file may be combined with the Postfix tlsproxy(8) server DSA certificate file specified with $smtpd_tls_dcert_file. See smtpd_tls_dkey_file for further details.
This feature is available in Postfix 2.8 and later.
File with the Postfix tlsproxy(8) server ECDSA certificate in PEM format. This file may also contain the Postfix tlsproxy(8) server private ECDSA key. See smtpd_tls_eccert_file for further details.
This feature is available in Postfix 2.8 and later.
File with the Postfix tlsproxy(8) server ECDSA private key in PEM format. This file may be combined with the Postfix tlsproxy(8) server ECDSA certificate file specified with $smtpd_tls_eccert_file. See smtpd_tls_eckey_file for further details.
This feature is available in Postfix 2.8 and later.
The Postfix tlsproxy(8) server security grade for ephemeral elliptic-curve Diffie-Hellman (EECDH) key exchange. See smtpd_tls_eecdh_grade for further details.
This feature is available in Postfix 2.8 and later.
List of ciphers or cipher types to exclude from the tlsproxy(8) server cipher list at all TLS security levels. See smtpd_tls_exclude_ciphers for further details.
This feature is available in Postfix 2.8 and later.
The message digest algorithm used to construct client-certificate fingerprints. See smtpd_tls_fingerprint_digest for further details.
This feature is available in Postfix 2.8 and later.
File with the Postfix tlsproxy(8) server RSA private key in PEM format. This file may be combined with the Postfix tlsproxy(8) server RSA certificate file specified with $smtpd_tls_cert_file. See smtpd_tls_key_file for further details.
This feature is available in Postfix 2.8 and later.
Enable additional Postfix tlsproxy(8) server logging of TLS activity. Each logging level also includes the information that is logged at a lower logging level. See smtpd_tls_loglevel for further details.
This feature is available in Postfix 2.8 and later.
The minimum TLS cipher grade that the Postfix tlsproxy(8) server will use with mandatory TLS encryption. See smtpd_tls_mandatory_ciphers for further details.
This feature is available in Postfix 2.8 and later.
Additional list of ciphers or cipher types to exclude from the tlsproxy(8) server cipher list at mandatory TLS security levels. See smtpd_tls_mandatory_exclude_ciphers for further details.
This feature is available in Postfix 2.8 and later.
The SSL/TLS protocols accepted by the Postfix tlsproxy(8) server with mandatory TLS encryption. If the list is empty, the server supports all available SSL/TLS protocol versions. See smtpd_tls_mandatory_protocols for further details.
This feature is available in Postfix 2.8 and later.
List of TLS protocols that the Postfix tlsproxy(8) server will exclude or include with opportunistic TLS encryption. See smtpd_tls_protocols for further details.
This feature is available in Postfix 2.8 and later.
With mandatory TLS encryption, require a trusted remote SMTP client certificate in order to allow TLS connections to proceed. See smtpd_tls_req_ccert for further details.
This feature is available in Postfix 2.8 and later.
The SMTP TLS security level for the Postfix tlsproxy(8) server; when a non-empty value is specified, this overrides the obsolete parameters smtpd_use_tls and smtpd_enforce_tls. See smtpd_tls_security_level for further details.
This feature is available in Postfix 2.8 and later.
The expiration time of Postfix tlsproxy(8) server TLS session cache information. A cache cleanup is performed periodically every $smtpd_tls_session_cache_timeout seconds. See smtpd_tls_session_cache_timeout for further details.
This feature is available in Postfix 2.8 and later.
Opportunistic TLS: announce STARTTLS support to SMTP clients, but do not require that clients use TLS encryption. See smtpd_use_tls for further details.
This feature is available in Postfix 2.8 and later.
How much time a tlsproxy(8) process may take to process local or remote I/O before it is terminated by a built-in watchdog timer. This is a safety mechanism that prevents tlsproxy(8) from becoming non-responsive due to a bug in Postfix itself or in system software. To avoid false alarms and unnecessary cache corruption this limit cannot be set under 10s.
Specify a non-zero time value (an integral value plus an optional one-letter suffix that specifies the time unit). Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks).
This feature is available in Postfix 2.8.
The name of the trace service. This service is implemented by the bounce(8) daemon and maintains a record of mail deliveries and produces a mail delivery report when verbose delivery is requested with "sendmail -v".
This feature is available in Postfix 2.1 and later.
A transport-specific override for the default_delivery_slot_cost parameter value, where transport is the master.cf name of the message delivery transport.
A transport-specific override for the default_delivery_slot_discount parameter value, where transport is the master.cf name of the message delivery transport.
A transport-specific override for the default_delivery_slot_loan parameter value, where transport is the master.cf name of the message delivery transport.
A transport-specific override for the default_destination_concurrency_failed_cohort_limit parameter value, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.5 and later.
A transport-specific override for the default_destination_concurrency_limit parameter value, where transport is the master.cf name of the message delivery transport.
A transport-specific override for the default_destination_concurrency_negative_feedback parameter value, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.5 and later.
A transport-specific override for the default_destination_concurrency_positive_feedback parameter value, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.5 and later.
A transport-specific override for the default_destination_rate_delay parameter value, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.5 and later.
A transport-specific override for the default_destination_recipient_limit parameter value, where transport is the master.cf name of the message delivery transport.
A transport-specific override for the default_extra_recipient_limit parameter value, where transport is the master.cf name of the message delivery transport.
A transport-specific override for the initial_destination_concurrency parameter value, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.5 and later.
Optional lookup tables with mappings from recipient address to (message delivery transport, next-hop destination). See transport(5) for details.
Specify zero or more "type:table" lookup tables. If you use this feature with local files, run "postmap /etc/postfix/transport" after making a change.
For safety reasons, as of Postfix 2.3 this feature does not allow $number substitutions in regular expression maps.
Examples:
transport_maps = dbm:/etc/postfix/transport transport_maps = hash:/etc/postfix/transport
A transport-specific override for the default_minimum_delivery_slots parameter value, where transport is the master.cf name of the message delivery transport.
A transport-specific override for the default_recipient_limit parameter value, where transport is the master.cf name of the message delivery transport.
A transport-specific override for the default_recipient_refill_delay parameter value, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.4 and later.
A transport-specific override for the default_recipient_refill_limit parameter value, where transport is the master.cf name of the message delivery transport.
This feature is available in Postfix 2.4 and later.
The time between attempts by the Postfix queue manager to contact a malfunctioning message delivery transport.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
A transport-specific override for the command_time_limit parameter value, where transport is the master.cf name of the message delivery transport.
The time limit for sending a trigger to a Postfix daemon (for example, the pickup(8) or qmgr(8) daemon). This time limit prevents programs from getting stuck when the mail system is under heavy load.
Time units: s (seconds), m (minutes), h (hours), d (days), w (weeks). The default time unit is s (seconds).
Message header that the Postfix cleanup(8) server inserts when a message contains no To: or Cc: message header. With Postfix 2.8 and later, the default value is empty. With Postfix 2.4-2.7, specify an empty value to disable this feature.
Example:
# Default value before Postfix 2.8. # Note: the ":" and ";" are both required. undisclosed_recipients_header = To: undisclosed-recipients:;
The numerical Postfix SMTP server response code when a sender or recipient address is rejected by the reject_unknown_sender_domain or reject_unknown_recipient_domain restriction. The response is always 450 in case of a temporary DNS error.
Do not change this unless you have a complete understanding of RFC 2821.
The Postfix SMTP server's action when reject_unknown_sender_domain or reject_unknown_recipient_domain fail due to a temporary error condition. Specify "defer" to defer the remote SMTP client request immediately. With the default "defer_if_permit" action, the Postfix SMTP server continues to look for opportunities to reject mail, and defers the client request only if it would otherwise be accepted.
This feature is available in Postfix 2.6 and later.
The numerical Postfix SMTP server response code when a client without valid address <=> name mapping is rejected by the reject_unknown_client_hostname restriction. The SMTP server always replies with 450 when the mapping failed due to a temporary error condition.
Do not change this unless you have a complete understanding of RFC 2821.
The Postfix SMTP server's action when reject_unknown_helo_hostname fails due to an temporary error condition. Specify "defer" to defer the remote SMTP client request immediately. With the default "defer_if_permit" action, the Postfix SMTP server continues to look for opportunities to reject mail, and defers the client request only if it would otherwise be accepted.
This feature is available in Postfix 2.6 and later.
The numerical Postfix SMTP server response code when the hostname specified with the HELO or EHLO command is rejected by the reject_unknown_helo_hostname restriction.
Do not change this unless you have a complete understanding of RFC 2821.
The numerical Postfix SMTP server response code when a recipient address is local, and $local_recipient_maps specifies a list of lookup tables that does not match the recipient. A recipient address is local when its domain matches $mydestination, $proxy_interfaces or $inet_interfaces.
The default setting is 550 (reject mail) but it is safer to initially use 450 (try again later) so you have time to find out if your local_recipient_maps settings are OK.
Example:
unknown_local_recipient_reject_code = 450
This feature is available in Postfix 2.0 and later.
The numerical Postfix SMTP server reply code when a recipient address matches $relay_domains, and relay_recipient_maps specifies a list of lookup tables that does not match the recipient address.
This feature is available in Postfix 2.0 and later.
The SMTP server reply code when a recipient address matches $virtual_alias_domains, and $virtual_alias_maps specifies a list of lookup tables that does not match the recipient address.
This feature is available in Postfix 2.0 and later.
The SMTP server reply code when a recipient address matches $virtual_mailbox_domains, and $virtual_mailbox_maps specifies a list of lookup tables that does not match the recipient address.
This feature is available in Postfix 2.0 and later.
The numerical Postfix SMTP server response when a recipient address probe fails due to a temporary error condition.
Unlike elsewhere in Postfix, you can specify 250 in order to accept the address anyway.
Do not change this unless you have a complete understanding of RFC 2821.
This feature is available in Postfix 2.6 and later.
The numerical Postfix SMTP server response when a recipient address is rejected by the reject_unverified_recipient restriction.
Unlike elsewhere in Postfix, you can specify 250 in order to accept the address anyway.
Do not change this unless you have a complete understanding of RFC 2821.
This feature is available in Postfix 2.1 and later.
The Postfix SMTP server's reply when rejecting mail with reject_unverified_recipient. Do not include the numeric SMTP reply code or the enhanced status code. By default, the response includes actual address verification details.
Example:
unverified_recipient_reject_reason = Recipient address lookup failed
This feature is available in Postfix 2.6 and later.
The Postfix SMTP server's action when reject_unverified_recipient fails due to a temporary error condition. Specify "defer" to defer the remote SMTP client request immediately. With the default "defer_if_permit" action, the Postfix SMTP server continues to look for opportunities to reject mail, and defers the client request only if it would otherwise be accepted.
This feature is available in Postfix 2.6 and later.
The numerical Postfix SMTP server response code when a sender address probe fails due to a temporary error condition.
Unlike elsewhere in Postfix, you can specify 250 in order to accept the address anyway.
Do not change this unless you have a complete understanding of RFC 2821.
This feature is available in Postfix 2.6 and later.
The numerical Postfix SMTP server response code when a recipient address is rejected by the reject_unverified_sender restriction.
Unlike elsewhere in Postfix, you can specify 250 in order to accept the address anyway.
Do not change this unless you have a complete understanding of RFC 2821.
This feature is available in Postfix 2.1 and later.
The Postfix SMTP server's reply when rejecting mail with reject_unverified_sender. Do not include the numeric SMTP reply code or the enhanced status code. By default, the response includes actual address verification details.
Example:
unverified_sender_reject_reason = Sender address lookup failed
This feature is available in Postfix 2.6 and later.
The Postfix SMTP server's action when reject_unverified_sender fails due to a temporary error condition. Specify "defer" to defer the remote SMTP client request immediately. With the default "defer_if_permit" action, the Postfix SMTP server continues to look for opportunities to reject mail, and defers the client request only if it would otherwise be accepted.
This feature is available in Postfix 2.6 and later.
The characters Postfix accepts as VERP delimiter characters on the Postfix sendmail(1) command line and in SMTP commands.
This feature is available in Postfix 1.1 and later.
Postfix is final destination for the specified list of virtual alias domains, that is, domains for which all addresses are aliased to addresses in other local or remote domains. The SMTP server validates recipient addresses with $virtual_alias_maps and rejects non-existent recipients. See also the virtual alias domain class in the ADDRESS_CLASS_README file
This feature is available in Postfix 2.0 and later. The default value is backwards compatible with Postfix version 1.1.
The default value is $virtual_alias_maps so that you can keep all information about virtual alias domains in one place. If you have many users, it is better to separate information that changes more frequently (virtual address -> local or remote address mapping) from information that changes less frequently (the list of virtual domain names).
Specify a list of host or domain names, "/file/name" or "type:table" patterns, separated by commas and/or whitespace. A "/file/name" pattern is replaced by its contents; a "type:table" lookup table is matched when a table entry matches a lookup string (the lookup result is ignored). Continue long lines by starting the next line with whitespace. Specify "!pattern" to exclude a host or domain name from the list. The form "!/file/name" is supported only in Postfix version 2.4 and later.
See also the VIRTUAL_README and ADDRESS_CLASS_README documents for further information.
Example:
virtual_alias_domains = virtual1.tld virtual2.tld
The maximal number of addresses that virtual alias expansion produces from each original recipient.
This feature is available in Postfix 2.1 and later.
Optional lookup tables that alias specific mail addresses or domains to other local or remote address. The table format and lookups are documented in virtual(5). For an overview of Postfix address manipulations see the ADDRESS_REWRITING_README document.
This feature is available in Postfix 2.0 and later. The default value is backwards compatible with Postfix version 1.1.
If you use this feature with indexed files, run "postmap /etc/postfix/virtual" after changing the file.
Examples:
virtual_alias_maps = dbm:/etc/postfix/virtual virtual_alias_maps = hash:/etc/postfix/virtual
The maximal nesting depth of virtual alias expansion. Currently the recursion limit is applied only to the left branch of the expansion graph, so the depth of the tree can in the worst case reach the sum of the expansion and recursion limits. This may change in the future.
This feature is available in Postfix 2.1 and later.
The maximal number of parallel deliveries to the same destination via the virtual message delivery transport. This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
The maximal number of recipients per message for the virtual message delivery transport. This limit is enforced by the queue manager. The message delivery transport name is the first field in the entry in the master.cf file.
Setting this parameter to a value of 1 changes the meaning of virtual_destination_concurrency_limit from concurrency per domain into concurrency per recipient.
Lookup tables with the per-recipient group ID for virtual(8) mailbox delivery.
In a lookup table, specify a left-hand side of "@domain.tld" to match any user in the specified domain that does not have a specific "[email protected]" entry.
When a recipient address has an optional address extension ([email protected]), the virtual(8) delivery agent looks up the full address first, and when the lookup fails, it looks up the unextended address ([email protected]).
Note 1: for security reasons, the virtual(8) delivery agent disallows regular expression substitution of $1 etc. in regular expression lookup tables, because that would open a security hole.
Note 2: for security reasons, the virtual(8) delivery agent will silently ignore requests to use the proxymap(8) server. Instead it will open the table directly. Before Postfix version 2.2, the virtual(8) delivery agent will terminate with a fatal error.
A prefix that the virtual(8) delivery agent prepends to all pathname results from $virtual_mailbox_maps table lookups. This is a safety measure to ensure that an out of control map doesn't litter the file system with mailboxes. While virtual_mailbox_base could be set to "/", this setting isn't recommended.
Example:
virtual_mailbox_base = /var/mail
Postfix is final destination for the specified list of domains; mail is delivered via the $virtual_transport mail delivery transport. By default this is the Postfix virtual(8) delivery agent. The SMTP server validates recipient addresses with $virtual_mailbox_maps and rejects mail for non-existent recipients. See also the virtual mailbox domain class in the ADDRESS_CLASS_README file.
This parameter expects the same syntax as the mydestination configuration parameter.
This feature is available in Postfix 2.0 and later. The default value is backwards compatible with Postfix version 1.1.
The maximal size in bytes of an individual virtual(8) mailbox or maildir file, or zero (no limit).
How to lock a UNIX-style virtual(8) mailbox before attempting delivery. For a list of available file locking methods, use the "postconf -l" command.
This setting is ignored with maildir style delivery, because such deliveries are safe without application-level locks.
Note 1: the dotlock method requires that the recipient UID or GID has write access to the parent directory of the recipient's mailbox file.
Note 2: the default setting of this parameter is system dependent.
Optional lookup tables with all valid addresses in the domains that match $virtual_mailbox_domains.
In a lookup table, specify a left-hand side of "@domain.tld" to match any user in the specified domain that does not have a specific "[email protected]" entry.
The virtual(8) delivery agent uses this table to look up the per-recipient mailbox or maildir pathname. If the lookup result ends in a slash ("/"), maildir-style delivery is carried out, otherwise the path is assumed to specify a UNIX-style mailbox file. Note that $virtual_mailbox_base is unconditionally prepended to this path.
When a recipient address has an optional address extension ([email protected]), the virtual(8) delivery agent looks up the full address first, and when the lookup fails, it looks up the unextended address ([email protected]).
Note 1: for security reasons, the virtual(8) delivery agent disallows regular expression substitution of $1 etc. in regular expression lookup tables, because that would open a security hole.
Note 2: for security reasons, the virtual(8) delivery agent will silently ignore requests to use the proxymap(8) server. Instead it will open the table directly. Before Postfix version 2.2, the virtual(8) delivery agent will terminate with a fatal error.
Optional lookup tables with a) names of domains for which all addresses are aliased to addresses in other local or remote domains, and b) addresses that are aliased to addresses in other local or remote domains. Available before Postfix version 2.0. With Postfix version 2.0 and later, this is replaced by separate controls: virtual_alias_domains and virtual_alias_maps.
The minimum user ID value that the virtual(8) delivery agent accepts as a result from $virtual_uid_maps table lookup. Returned values less than this will be rejected, and the message will be deferred.
The default mail delivery transport and next-hop destination for final delivery to domains listed with $virtual_mailbox_domains. This information can be overruled with the transport(5) table.
Specify a string of the form transport:nexthop, where transport is the name of a mail delivery transport defined in master.cf. The :nexthop destination is optional; its syntax is documented in the manual page of the corresponding delivery agent.
This feature is available in Postfix 2.0 and later.
Lookup tables with the per-recipient user ID that the virtual(8) delivery agent uses while writing to the recipient's mailbox.
In a lookup table, specify a left-hand side of "@domain.tld" to match any user in the specified domain that does not have a specific "[email protected]" entry.
When a recipient address has an optional address extension ([email protected]), the virtual(8) delivery agent looks up the full address first, and when the lookup fails, it looks up the unextended address ([email protected]).
Note 1: for security reasons, the virtual(8) delivery agent disallows regular expression substitution of $1 etc. in regular expression lookup tables, because that would open a security hole.
Note 2: for security reasons, the virtual(8) delivery agent will silently ignore requests to use the proxymap(8) server. Instead it will open the table directly. Before Postfix version 2.2, the virtual(8) delivery agent will terminate with a fatal error.